jwyndsdime

Hey guys I got alot of my stuff today.
Still waiting on intercooler and piping, tial 50mm BOV,from AV engineering.
Turbo manifold, walbro fuel pump, Tial 44mm Wastgate from love-fab.
Garrett GT 35r turbo, RC 1000cc injectors, hondata s200 and oil/coolant kit from redshiftmotorsports.com
^great deals, check em' out!^

Lemme know what you guys think.

Here is everything from today.


Here is my fuel rail, fuel pressure reg., alternator and belts, AEM Cam gear, zoom 6 puck clutch, boost gauge, oil press. gauge, MSD modified honda distributor cap and rotor, and a glimpse of my 68mm skunk 2


Here is my fidanza 8lb. flywheel, MSD Wires, Driveshaft shop axles, and my Skunk 2 again.





Modified by jwyndsdime at 6:12 PM 3/22/2007

jwyndsdime

Sorry guys, forgot to post these too.




semi-closed deck

DfwBB6

looks very promising

jwyndsdime

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DfwBB6 &raquo;</TD></TR><TR><TD CLASS="quote">looks very promising </TD></TR></TABLE>

thanks!
I can't wait.

DfwBB6

hey want manifold and EMS r u planning on running?

jwyndsdime

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DfwBB6 &raquo;</TD></TR><TR><TD CLASS="quote">hey want manifold and EMS r u planning on running?</TD></TR></TABLE>

Love Fab Mini-me-eq manifold
And hondata s300

Bboy_Trevstuh817

I just got back my built h23 wit crower rods and mahle pistons I had endyn sleev my block bro so I should be around the same hp as you!

JoePSI

Looks like a good start!

3D HONDA

Looks immense pitting its a rip of to buy stuff in the UK its an absolute joke most overpriced country in the world

jwyndsdime

today I got my garrett gt35r, my AEM Wideband, my RC 1000cc injectors, and my hondata intake manifold gasket... pic up tomorrow.

DfwBB6

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jwyndsdime &raquo;</TD></TR><TR><TD CLASS="quote">today I got my garrett gt35r, my AEM Wideband, my RC 1000cc injectors, and my hondata intake manifold gasket... pic up tomorrow.</TD></TR></TABLE>

dude keep updates coming

305-H22A

with a good tuner you should reach your goal.

Schister66

looks like fun AND streetable....my only question is about the 8lb flywheel...isn't that too light??

0KStuned

Are you going to keep the balance shafts?

Mikey3000

thats hot

tony n.

good **** man looks like a good project

HamiltonRex

Looks like a solid build.

DfwBB6

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Reid@KAIZENSPEED &raquo;</TD></TR><TR><TD CLASS="quote">Are you going to keep the balance shafts? </TD></TR></TABLE>

shameless plug!!!! nway id recommend getting the balance shaft removal kit from kaizenspeed

jwyndsdime

hey guys, i finally got my torque plate on my block, so its honed and ready to get assembled...

yes I am removing my balancer shafts.
Pix will be up today of the turbo and such.

jwyndsdime

AEM Wideband


Garrett gt35


Itsa true Garrett with V-band.


Stock Manifold all cleaned up and my RC 1000's


you get the picture...


Honing my block.

Lemme know what you guys think.

Ludster

are ur eagle rods custom? Just wondering because, i didn't know eagle made rods for the h23.

PS Nice Build!

Hawkze_2.3

Good stuff

I'm going down the same path as you, just not as far along.

Are you going to keep the IABs?

mrbh22

great start i just got my block back from the machine shop. je/ crower/ calico h22 stuffs. what car is it goin in?

h22_TEG

i too am down this road i have dart block, jg head, jg low comp pistons, crower rods, 1000cc injectors hondata s300, gt35r turbo all custom manifolds. lookin for 600 horse bump on fellow h22 owner

96vtecI4

What are those axels rated at? Your pile of parts is bigger then mine! haha and thats saying something.