A couple manifolds i've been working on...
#1
Honda-Tech Member
Thread Starter
A couple manifolds i've been working on...
These are both with 321 stainless from burns, the honda one 16ga, the celica 18ga. The celica one uses a burns double slip collector and an undivided turbine housing. The honda one uses a split turbine housing so I built the collector to put 1&4 into one side of the housing and 2&3 into the other. The honda one uses 2 gates cause it needs to with two seperate chambers, and we will need both to get the boost down low enough to hook up. The celica one will just need one gate, as we don't ever plan to be much below 30psi!
#4
Honda-Tech Member
Thread Starter
Re: A couple manifolds i've been working on... (This One)
The first celica header had different port locations so it worked out better this way. I like this one better though.
Javier, the ac version will be available in 3 weeks. I will be made of 8ga. stainless and offer a lifetime warranty. I call it half race cause i'm not as good as you guys! lol Thanks man.
Javier, the ac version will be available in 3 weeks. I will be made of 8ga. stainless and offer a lifetime warranty. I call it half race cause i'm not as good as you guys! lol Thanks man.
#7
The Boot
Join Date: Dec 2001
Location: Arizona, US
Posts: 9,841
Likes: 0
Received 0 Likes
on
0 Posts
Re: A couple manifolds i've been working on... (tony1)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by tony1 »</TD></TR><TR><TD CLASS="quote">I call it half-race cause i'm not as good as you guys! lol Thanks man. </TD></TR></TABLE>
haha
the mani's look great man
haha
the mani's look great man
Trending Topics
#9
Honda-Tech Member
Join Date: Aug 2002
Location: JDM ricer land, CA
Posts: 2,901
Likes: 0
Received 0 Likes
on
0 Posts
Re: A couple manifolds i've been working on... (tony1)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by tony1 »</TD></TR><TR><TD CLASS="quote">The first celica header had different port locations so it worked out better this way. I like this one better though.
Javier, the ac version will be available in 3 weeks. I will be made of 8ga. stainless and offer a lifetime warranty. I call it half race cause i'm not as good as you guys! lol Thanks man. </TD></TR></TABLE>
3 weeks after your release you will see clones of your manifold peddled through these boards..hehe
pimpass manifolds, so i guess u guys gonna need a new heatshield for the new celica mani huh?
Javier, the ac version will be available in 3 weeks. I will be made of 8ga. stainless and offer a lifetime warranty. I call it half race cause i'm not as good as you guys! lol Thanks man. </TD></TR></TABLE>
3 weeks after your release you will see clones of your manifold peddled through these boards..hehe
pimpass manifolds, so i guess u guys gonna need a new heatshield for the new celica mani huh?
#10
Honda-Tech Member
Join Date: Mar 2004
Location: ORANGE COUNTY, CA., USA
Posts: 1,155
Likes: 0
Received 0 Likes
on
0 Posts
Re: A couple manifolds i've been working on... (tony1)
i saw pics of that a while back in turbo magazine when you were starting on it! i was curious how it would turn out, looks damb good...
#11
Honda-Tech Member
Thread Starter
Re: A couple manifolds i've been working on... (Bob-DC2)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Bob-DC2 »</TD></TR><TR><TD CLASS="quote">on a side note, are you going to coat the manifolds, or you not that into coating?</TD></TR></TABLE>
I firmly believe in coating the manifolds, but neither of them have been done yet.
I firmly believe in coating the manifolds, but neither of them have been done yet.
#15
Honda-Tech Member
Thread Starter
Re: A couple manifolds i've been working on... (legendboy)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by legendboy »</TD></TR><TR><TD CLASS="quote">Excellent work! Your using an Aerowave or a 350LX arn't you?</TD></TR></TABLE>
Miller Syncrowave 250, but i really want the Dynasty 300.
Miller Syncrowave 250, but i really want the Dynasty 300.
#16
Honda-Tech Member
Join Date: Mar 2004
Location: ORANGE COUNTY, CA., USA
Posts: 1,155
Likes: 0
Received 0 Likes
on
0 Posts
Re: A couple manifolds i've been working on... (tony1)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by tony1 »</TD></TR><TR><TD CLASS="quote">
Miller Syncrowave 250, but i really want the Dynasty 300.</TD></TR></TABLE>
theres one on e-bay right now!
Miller Syncrowave 250, but i really want the Dynasty 300.</TD></TR></TABLE>
theres one on e-bay right now!
#19
Re: A couple manifolds i've been working on... (BrownDx)
the only problem with tony making headers is... he doesnt buy them from me anymore. no love. jay kay jay kay, i still love you and your work. =D
#20
Smarter than you
iTrader: (1)
Join Date: Apr 2001
Location: Third Coast, united states
Posts: 8,240
Likes: 0
Received 2 Likes
on
2 Posts
Re: A couple manifolds i've been working on... (tony1)
Tony, if I had a dollar for everytime I saw stuff that you have built and I said to myself, "damn I wanna learn how to do this"...... id have alot of money. NICE WORK!