FS: leftover Turbo manifold flanges
#1
Thread Starter
FS: leftover Turbo manifold flanges
I have some flange left overs from a lot I had cut. Made of 304SS. These would help the DIY manifold guy out on his project. This is a one time thing on the price though...once these are gone I may make more but the prices will be a little higher.
3/8" thick 304SS
five 35/38mm WG flanges - 8mm threads ($15 each) the studs are not included but I can get them for you
six 35/38mm WG flanges - through bolt ($15 each)
two 4 bolt downpipe flanges - for 2.5" tubing ($20 each)
1/2" thick 304SS
two T3 inlet flanges - 10mm threads ($28 each)
three 5 bolt Ford downpipe flanges w/ WG hole - for 2.5" tubing ($50 each)
three 5 bolt Ford downpipe flanges w/o WG hole - for 2.5" tubing ($50 each)
one Honda B series cyl head flanges ($75 each)
one D series cyl head flange - looks similar to the Bseries one, will for ZC and other D16 heads($75)
four 2.5" -> 3" 304SS transition rings for downpipes - easy way to clearance the downpipe bolts or nuts when running a full 3" DP ($15 each)
I travel alot for work so be patient if I do not reply ASAP, I try my best.
~Jamie
Modified by BROOD at 5:14 AM 9/29/2004
3/8" thick 304SS
five 35/38mm WG flanges - 8mm threads ($15 each) the studs are not included but I can get them for you
six 35/38mm WG flanges - through bolt ($15 each)
two 4 bolt downpipe flanges - for 2.5" tubing ($20 each)
1/2" thick 304SS
two T3 inlet flanges - 10mm threads ($28 each)
three 5 bolt Ford downpipe flanges w/ WG hole - for 2.5" tubing ($50 each)
three 5 bolt Ford downpipe flanges w/o WG hole - for 2.5" tubing ($50 each)
one Honda B series cyl head flanges ($75 each)
one D series cyl head flange - looks similar to the Bseries one, will for ZC and other D16 heads($75)
four 2.5" -> 3" 304SS transition rings for downpipes - easy way to clearance the downpipe bolts or nuts when running a full 3" DP ($15 each)
I travel alot for work so be patient if I do not reply ASAP, I try my best.
~Jamie
Modified by BROOD at 5:14 AM 9/29/2004
Thread
Thread Starter
Forum
Replies
Last Post