dohcter g

I just installed my new traction bars. I looked everywhere for some at a bargin. Below are pics of them and a link where to find them. They were only $159.00 on ebay. I will update this post Fri. and let you know how much they helped on 60 fts.

Here is the link to find them:
http://cgi.ebay.com/ebaymotors...06165

Here are the pics:

http://www.we-todd-did-racing....D.jpg
http://www.we-todd-did-racing....D.jpg
http://www.we-todd-did-racing....D.jpg

dohcter g

Sorry the pics came out so bad!!!!!

prestonpark

nice u feel any wheel hop

Charles B.

who makes those? what brand?

dohcter g

It is an individual or a small company making them.


No wheel hop with street tires on the road.........I will not see how they act at the track with my MT's until Thursday and Friday.

TK715

does it hang low? because from the picture it looks hella low.

TK715

keep me updated im an interested.

dohcter g

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by TK715 &raquo;</TD></TR><TR><TD CLASS="quote">does it hang low? because from the picture it looks hella low.</TD></TR></TABLE>

No. It is made for lowered cars. Here is a pic from the front.

http://www.we-todd-did-racing....D.jpg

XRacerX

iTrader: (3)

Very nice am interested in one as well.

maxpsi

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by XRacerX &raquo;</TD></TR><TR><TD CLASS="quote">Very nice am interested in one as well. </TD></TR></TABLE>

Yeah, no kidding. Price is right.

Peter North

damm not bad at all for that price

ATS*Mark

dood that looks great for the price , i might just get one

zad5

can you take another pic underneath the car but from the front. like enough to show where it mounts to the lca and enough to show the crossmember part also.

vteczone

do they make one for crx88/91?

dohcter g

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by zad5 &raquo;</TD></TR><TR><TD CLASS="quote">can you take another pic underneath the car but from the front. like enough to show where it mounts to the lca and enough to show the crossmember part also.</TD></TR></TABLE>

Here is a pic of the LCA, hope it helps!!!

http://www.we-todd-did-racing....D.jpg

They make them for a 88-91 civic, so I would think it would work in a CRX!

zad5

hmm sheyat i was trying to check the geometry can you jack up the car and take the pic from underneath but from teh middle of the car kinda.

TK715

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by zad5 &raquo;</TD></TR><TR><TD CLASS="quote">hmm sheyat i was trying to check the geometry can you jack up the car and take the pic from underneath but from teh middle of the car kinda.</TD></TR></TABLE>

dohcter g

I just got back from the track!!! It was so damn humid!! The traction bars did an awesome job.1.78 60 ft. and 8.52 @ 80.5mph!! My best 60 ft before the traction bars was 1.86!!!!!!!!

2.2L EH2

Damn sounds like a deal. Anyone know if they would work with a 92 Honda Civic Batchback w/H22?

dohcter g

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by BOUNTY_HUNTER &raquo;</TD></TR><TR><TD CLASS="quote">Damn sounds like a deal. Anyone know if they would work with a 92 Honda Civic Batchback w/H22?</TD></TR></TABLE>

They do not take up alot of room, you will be fine!!!!

lilredhatch

The LS was haulin butt last night!! Props to the dohcter. Gotta get myself some of those traction bars and work on my launches!!!

KevronsEG

On CRX/EF will this eliminate the frotn crossmember or just add to the mess?

TK715

is this with or without slicks? and what is your setup?

PNG

Looks very much like the Competition Engineering bars... I put a set of those on our project Civic over the weekend. Getting the pressed-in studs out of the lower control arms was fun.

Anyway, that's a story for Issue #3.

XRacerX

iTrader: (3)

Right on am placing my order for one on fri.