how to wire a switch to check obd1 engine codes...
#1
Honda-Tech Member
Thread Starter
Join Date: Nov 2002
Location: on the hudson
Posts: 3,826
Likes: 0
Received 0 Likes
on
0 Posts
how to wire a switch to check obd1 engine codes...
is there a write up somewhere on how to do this? i did a search but didn't come up with what i need.
#2
Re: how to wire a switch to check obd1 engine codes... (elmalouno)
are you using a boomslang type harness?
that's what i'm using and i wired up a check engine switch to my defroster switch. one end goes from the pinout (forget the number) on the harness, and the other goes to a ground.
flip the defrost and see what code ur throwing
that's what i'm using and i wired up a check engine switch to my defroster switch. one end goes from the pinout (forget the number) on the harness, and the other goes to a ground.
flip the defrost and see what code ur throwing
#4
Re: how to wire a switch to check obd1 engine codes... (elmalouno)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by elmalouno »</TD></TR><TR><TD CLASS="quote">thats nice... the pin is d4? that sound right?</TD></TR></TABLE>
yes, thats it... just rig up a switch... makes things much easier!
yes, thats it... just rig up a switch... makes things much easier!
#6
Re: how to wire a switch to check obd1 engine codes... (elmalouno)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by elmalouno »</TD></TR><TR><TD CLASS="quote">thanks hunter.... now if only you would hang out with my 300 buddies.... </TD></TR></TABLE>
haha, PM sent
haha, PM sent
Thread
Thread Starter
Forum
Replies
Last Post
court
Honda CRX / EF Civic (1988 - 1991)
4
01-29-2006 06:05 PM
EGDC2CIVIC
Audio / Security / Video
6
04-22-2005 02:46 PM