earl

After receiving your block, the process begins with hot tanking, squaring and surfacing the block, Benson Machine sleeves installed with a .003" stepped deck, Benson bored and honed cylinders, Benson balanced and micropolished crank, CP Pistons (the most accurate pistons made) and rings, Eagle Rods, ACL bearings, new OEM oil pump, new water pump and lower gasket set. Includes blueprinting (you get all the specs, nothing secret) and assembly. You must supply the block and crank core plus all necessary bolts. Allow about 4 weeks from receipt of core for delivery of the completed block.
Price for all of the above including return shipping is $3075. This price is for all B, D and H series blocks. Add $375 if you would like to have Pauter Rods rather than Eagle.
A thread on how Benson sleeves blocks:
https://honda-tech.com/zerothread?id=565375

Any questions on a build, IM Ninesecrx



Modified by earl at 3:24 PM 8/31/2007

tommyten

how much if you already have the rods and pistons?
thanks

B18Flip

one stop shopping for 700hp........gimme a year or so to save up Earl

ATS*Mark

good price earl id mos def trust your and bensons word

thanks again for the parts

MooreBoost

Would you not have ridiculous lag w/ a turbo capable of pushing 700 ponies?

FOrSfEd

Damn I need to jump on this

markaria

Finest

That's an awesome deal, especially with it being assembled and ready to run out the box!

How long would this deal be going on? (please say forever...)

earl

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by tegunderpressure &raquo;</TD></TR><TR><TD CLASS="quote">Would you not have ridiculous lag w/ a turbo capable of pushing 700 ponies?</TD></TR></TABLE>Yeah, you would have to launch from every traffic light on a 2 step
The blocks work just as well at 300whp also.

racinskittle

sweet! man, a block that can take 700 ponies for 3000 not bad at all

Code Blue

bump for earl


jason, whos running a benson block with cp pistons and pauter rods

LUDExCONDUCT

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Code Blue &raquo;</TD></TR><TR><TD CLASS="quote">bump for earl


jason, whos running a benson block with cp pistons and pauter rods </TD></TR></TABLE>

I'm want to know for this also. Please hit me up w/ a PM. thanks

reactiondc2

im going to make my friend go have you build his b20

92HB_HB

can't wait to get my block back.. i'm gonna waste about 10 MB of memory just on digital pics of the block.. hehe..

ATS*Mark

i cant wait to see those pics , i will shot down WTDR with all my pics when my block comes back

Boostage

good price

calib17a

How much is assembly if I brought you the rods and pistons, and misc. parts after I get a b18a1 benson sleeved to 84mm and do your sleeves come in different thickness?

B18C1CYA

i have just got my block back from earl/benson and all i can say is top notch work, you will not be disapionted it took about 4 weeks to get my block very quick and worth the wait and here is my build uphttps://honda-tech.com/zerothread?id=878233

markaria

Mine should be back in a week or so, I'm very excited!

markaria

...got my block back and in and running yesterday. Once I had everything in and let the engine turn a few times to get oil pressure, it started instantly, and purred like a little kitten! No strange noises, no unreasonable smoking, just a healthy sounding/running b18c5 (or did the 83mm now make it a b19c5? lol)
Now off to the dyno....
to benson
a big to Earl and his excellent work/turnaround time/communication
and last but not least a to art for getting my fluidamper overnighted to me in time!

sgrrrr

i was also wondering how much if i already have rods and pistons.. thanks

Dr Pooface

Who does the actual machining and assembly work on the block? Is that price for any bore or just stock?

earl

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Dr Pooface &raquo;</TD></TR><TR><TD CLASS="quote">Who does the actual machining and assembly work on the block? Is that price for any bore or just stock?</TD></TR></TABLE>Price is for any bore size you want. Most of the info is in the original post.
If anyone has some of their parts already, just IM me and I will quote you on the build.
Or e-mail me at
elaskey@***.net

earl

Rod.

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by B18C1CYA &raquo;</TD></TR><TR><TD CLASS="quote">i have just got my block back from earl/benson and all i can say is top notch work, you will not be disapionted it took about 4 weeks to get my block very quick and worth the wait </TD></TR></TABLE>

same thing here