At what rpm does vtec/secondary runners engage on 1994-95 GSR?
#1
Honda-Tech Member
Thread Starter
Join Date: Mar 2001
Location: USA
Posts: 997
Likes: 0
Received 0 Likes
on
0 Posts
At what rpm does vtec/secondary runners engage on 1994-95 GSR?
At what rpm do the secondary intake runners open and vtec engage on a 1994-95 Integra GSR?
Thanks,
Mark
[Modified by se93, 5:56 AM 10/29/2001]
Thanks,
Mark
[Modified by se93, 5:56 AM 10/29/2001]
#4
Trial User
Join Date: Aug 2000
Location: Nashville, TN, USA
Posts: 997
Likes: 0
Received 0 Likes
on
0 Posts
Re: At what rpm does vtec/secondary runners engage on 1994-95 GSR? (Muckman)
errr... we're both wrong... it's 5800 for the secondaries.
Thanks for the correction Trey!
Vazquez - Who takes a split second to look down at the tach once he HEARS the change over.
Thanks for the correction Trey!
Vazquez - Who takes a split second to look down at the tach once he HEARS the change over.
#5
Trial User
Join Date: May 2000
Location: Los Angeles, CA
Posts: 7,033
Likes: 0
Received 0 Likes
on
0 Posts
Re: At what rpm does vtec/secondary runners engage on 1994-95 GSR? (se93)
vtec crossover is 4500
Secdondary is 5800
Don't listen to the kids who tell you vtec is at 5800, just because it's louder at that point. VTEC is pretty quiet.... often confused for the IAB ...
Secdondary is 5800
Don't listen to the kids who tell you vtec is at 5800, just because it's louder at that point. VTEC is pretty quiet.... often confused for the IAB ...
#6
Trial User
Join Date: Aug 2000
Location: Nashville, TN, USA
Posts: 997
Likes: 0
Received 0 Likes
on
0 Posts
Re: At what rpm does vtec/secondary runners engage on 1994-95 GSR? (GSRwBOOST)
Yup, you'll NEVER hear a GSR hit VTEC... with my exhaust off, you could JUST HEAR VTEC switchover, it's NOTHING as elaborate as the secondaries... and if you didn't know what it was, you'd never know.
Trending Topics
#8
Trial User
Join Date: Aug 2000
Location: Nashville, TN, USA
Posts: 997
Likes: 0
Received 0 Likes
on
0 Posts
Re: At what rpm does vtec/secondary runners engage on 1994-95 GSR? (bommiE)
this again, people need to do searches....4400 1st 5650 2nd
#10
Re: At what rpm does vtec/secondary runners engage on 1994-95 GSR? (Vazquez911)
Vazquez-
I wouldn't say that you'll NEVER here a gsr hit VTEC, if I am in second gear at 3K RPM's and floor the pedal, I can hear the VTEC solenoid "click" when the pins are engaged to stabilize the race-profile cam lobes.....and I do hear it get a little deeper once the solenoid activates.......
I wouldn't say that you'll NEVER here a gsr hit VTEC, if I am in second gear at 3K RPM's and floor the pedal, I can hear the VTEC solenoid "click" when the pins are engaged to stabilize the race-profile cam lobes.....and I do hear it get a little deeper once the solenoid activates.......
#11
Trial User
Join Date: Aug 2000
Location: Nashville, TN, USA
Posts: 997
Likes: 0
Received 0 Likes
on
0 Posts
Re: At what rpm does vtec/secondary runners engage on 1994-95 GSR? (FrostyGSR)
Vazquez-
I wouldn't say that you'll NEVER here a gsr hit VTEC, if I am in second gear at 3K RPM's and floor the pedal, I can hear the VTEC solenoid "click" when the pins are engaged to stabilize the race-profile cam lobes.....and I do hear it get a little deeper once the solenoid activates.......
I wouldn't say that you'll NEVER here a gsr hit VTEC, if I am in second gear at 3K RPM's and floor the pedal, I can hear the VTEC solenoid "click" when the pins are engaged to stabilize the race-profile cam lobes.....and I do hear it get a little deeper once the solenoid activates.......
#12
New User
Join Date: Mar 2001
Location: MMMMMMMMMMMM
Posts: 1,016
Likes: 0
Received 0 Likes
on
0 Posts
Re: At what rpm does vtec/secondary runners engage on 1994-95 GSR? (bommiE)
this again, people need to do searches....4400 1st 5650 2nd
Actually I think the secondaries open up at 5650.859326 rpm, but I could be wrong.
#13
Honda-Tech Member
Join Date: Aug 2000
Location: somewhere in, CT, USA
Posts: 2,677
Likes: 0
Received 0 Likes
on
0 Posts
Re: At what rpm does vtec/secondary runners engage on 1994-95 GSR? (2K1 GS-R)
i thought it was 5750 rpms? seriously, i read it somewhere reputable unlike h-t.com! j/k!
gotta find a link for proof...
gotta find a link for proof...
#14
Moderator in Chief
iTrader: (2)
Re: At what rpm does vtec/secondary runners engage on 1994-95 GSR? (Vazquez911)
Yup, you'll NEVER hear a GSR hit VTEC... with my exhaust off, you could JUST HEAR VTEC switchover, it's NOTHING as elaborate as the secondaries... and if you didn't know what it was, you'd never know.
yeah and I do hear the secondaries open shortly before 6k
anyone know why the VTEC cross over and the secondaries dont change together at the same rpm?
[Modified by Muckman, 4:27 PM 10/30/2001]
#15
Honda-Tech Member
Re: At what rpm does vtec/secondary runners engage on 1994-95 GSR? (Muckman)
All of our cars can't be precise, the registered reading you'll see on your tach is going to be + or - 50-100 RPM... I've seen my VTEC engage at around 3800, and my Secondary butterfly runners are around 6000-6200... it's all fucked up...
You can hear a slight pitch change @ VTEC engagement (along with the car *pulling* like a ************) then at 6000 or so the tone changes to a deep, fast growl!
Ah, I haven't heard VTEC in over a month...
You can hear a slight pitch change @ VTEC engagement (along with the car *pulling* like a ************) then at 6000 or so the tone changes to a deep, fast growl!
Ah, I haven't heard VTEC in over a month...
#16
Honda-Tech Member
Join Date: Jan 2000
Location: Northern, CA, USA
Posts: 1,119
Likes: 0
Received 0 Likes
on
0 Posts
Re: At what rpm does vtec/secondary runners engage on 1994-95 GSR? (Muckman)
anyone why the VTEC cross over and the secondaries dont change together at the same rpm?
#17
Re: At what rpm does vtec/secondary runners engage on 1994-95 GSR? (Muckman)
anyone why the VTEC cross over and the secondaries dont change together at the same rpm?
#18
Honda-Tech Member
Join Date: Aug 2001
Location: I NEED 2 LITERS, IL
Posts: 3,350
Likes: 0
Received 0 Likes
on
0 Posts
Re: At what rpm does vtec/secondary runners engage on 1994-95 GSR? (RacingE_Teg)
4400-5800... just get a v-afc and set it to where ever the hell ya want(hehehe).... set at 1200rpms, set it at 10,000 rpms.... and when i hooked up my v-afc it had the stock settings for my gsr, same for my friend with his gay16(oops b16-hehehe)
not to sound like a but sometimes it seems the only reason people get vtec motors is to hear the vtec... as long as it's working thats good enough for me... i'd rather have a stealth sounding vtec... people still think i have my ls motor in when i dont have my aem in... but they never ask when i have it on(hehehe).... the es oval exhaust just goes from deep to DEEEEEPER when it switches over... my buddy messed around with the 1st gen b16 solenoids, for some reason he thinks there louder than all the rest... maybe i'll switch with my other friend and see if there is any change... i'll keep ya posted if ya care, i dont(hehehe)
not to sound like a but sometimes it seems the only reason people get vtec motors is to hear the vtec... as long as it's working thats good enough for me... i'd rather have a stealth sounding vtec... people still think i have my ls motor in when i dont have my aem in... but they never ask when i have it on(hehehe).... the es oval exhaust just goes from deep to DEEEEEPER when it switches over... my buddy messed around with the 1st gen b16 solenoids, for some reason he thinks there louder than all the rest... maybe i'll switch with my other friend and see if there is any change... i'll keep ya posted if ya care, i dont(hehehe)
#21
Honda-Tech Member
Join Date: Aug 2001
Location: I NEED 2 LITERS, IL
Posts: 3,350
Likes: 0
Received 0 Likes
on
0 Posts
Re: At what rpm does vtec/secondary runners engage on 1994-95 GSR? (LS(litesleeper))
just kidding about the vtec settings(hehehe) dont want anybody to f@ck up their shiot...
but it is 4400-5800stock....
but it is 4400-5800stock....
#22
New User
Join Date: Dec 2000
Location: Toronto, ON, Canada
Posts: 209
Likes: 0
Received 0 Likes
on
0 Posts
Re: At what rpm does vtec/secondary runners engage on 1994-95 GSR? (se93)
Sometimes people get it mixed up. I know for a fact that the secondary runners open up at 4400rpms and the cam lob engagement is at 5750-5800 whatever, u guys get the point. Do you guys agree with this? Any disagree? People have it the other way around sometimes.
#23
New User
Join Date: Apr 2001
Location: Im really not trailer trash...honest
Posts: 737
Likes: 0
Received 0 Likes
on
0 Posts
Re: At what rpm does vtec/secondary runners engage on 1994-95 GSR? (MIKEGSR95)
4400, 5800
4400 RPM -- Vtec Engagement
5800 RPM -- Secondary Intake Runners
[Modified by Phat GS-R, 2:15 PM 10/30/2001]
#24
Trial User
Join Date: Jul 2000
Location: Sugar Land, TX, USA
Posts: 1,974
Likes: 0
Received 0 Likes
on
0 Posts
Re: At what rpm does vtec/secondary runners engage on 1994-95 GSR? (Mugen-EG6)
Sometimes people get it mixed up. I know for a fact that the secondary runners open up at 4400rpms and the cam lob engagement is at 5750-5800 whatever, u guys get the point. Do you guys agree with this? Any disagree? People have it the other way around sometimes.
#25
New User
Join Date: Dec 2000
Location: Toronto, ON, Canada
Posts: 209
Likes: 0
Received 0 Likes
on
0 Posts
Re: At what rpm does vtec/secondary runners engage on 1994-95 GSR? (Jesse H)
Yes, i do have Mugen in my name actually, and are you trying to imply something?. I've had this checked before (this question has been asked many times) with my friend at Honda right out of the GS-R manual, and the secondary runners open at 4400rpms and the cam lobe engagement is at 5800 rpms.