e cutout, how many of you turbo guys here use it?
#5
Honda-Tech Member
Join Date: Jan 2002
Location: Chandler., Arizona
Posts: 9,684
Likes: 0
Received 0 Likes
on
0 Posts
i was going to get one but everyone that i know that has one says that their's sticks and rarley works. i've heard that they work perfect from others too... i'd rather just wait til they make a full proof one that ALWAYS works, i'd rather not have to **** with it
Trending Topics
#8
Honda-Tech Member
Join Date: Aug 2003
Location: 310, Ca
Posts: 2,462
Likes: 0
Received 0 Likes
on
0 Posts
Re: e cutout, how many of you turbo guys here use it? (DubyaAye)
I got mine here.
http://www.mccordcg.com/mpp/mpp.htm
http://www.mccordcg.com/mpp/mpp.htm
#9
Re: e cutout, how many of you turbo guys here use it? (hookonboost)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by hookonboost »</TD></TR><TR><TD CLASS="quote">I got mine here.
http://www.mccordcg.com/mpp/mpp.htm</TD></TR></TABLE>
yeah i bought that brand off a ht member works great
http://www.mccordcg.com/mpp/mpp.htm</TD></TR></TABLE>
yeah i bought that brand off a ht member works great
#11
Honda-Tech Member
Join Date: Jan 2002
Location: NJ, US
Posts: 2,763
Likes: 0
Received 0 Likes
on
0 Posts
Re: e cutout, how many of you turbo guys here use it? (AB16A2T)
is there a valve that blocks off the stock exhaust while the e cutout is open? or does it allow air to travel through both passages
#12
Honda-Tech Member
Join Date: Jan 2002
Location: Jacksonville, Fl
Posts: 833
Likes: 0
Received 0 Likes
on
0 Posts
Re: e cutout, how many of you turbo guys here use it? (Red CiViC Hatch)
A little might go into the stock exhaust but most of it will go out the ecutout since it is the path of least resistance.
#13
Honda-Tech Member
Join Date: May 2003
Location: Chicago, IL
Posts: 1,024
Likes: 0
Received 0 Likes
on
0 Posts
Re: e cutout, how many of you turbo guys here use it? (DubyaAye)
i have one of these sitting in my room waiting to be put on. Im pretty confident that results will be good, what i was just wondering is that if anyone with a obd1 car has ran this during emissions and how the test went. (obviously closed) Due to the fact i heard the allow for a small leak.
#14
Honda-Tech Member
Join Date: Feb 2002
Location: Angeles Crest, so cal
Posts: 13,501
Likes: 0
Received 0 Likes
on
0 Posts
Re: e cutout, how many of you turbo guys here use it? (NyQuiL)
http://www.quicktimeperformance.com/
has a few cut-outs. I was going to run one, with the turn-down pipe so the gases would flow right on my undercarriage.
has a few cut-outs. I was going to run one, with the turn-down pipe so the gases would flow right on my undercarriage.
Thread
Thread Starter
Forum
Replies
Last Post
. o 69 o .
Forced Induction
7
08-26-2004 08:14 AM