Fuster_Cluck

I can get one for $85 shipped. I'm running 2.5" piping from a GSR catalytic converter back to an arospeed axle back which is welded to the piping

What are the inlet diameter on the s2k muffler? Is this a bad idea on a civic with a GSR motor? I'm about tired of having a LOUD exhaust.

Ricey McRicerton

Why not a CTR or an ITR exhaust?? I'm not sure how large the S2k muffler is.

Fuster_Cluck

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Ricey McRicerton &raquo;</TD></TR><TR><TD CLASS="quote">Why not a CTR or an ITR exhaust?? I'm not sure how large the S2k muffler is. </TD></TR></TABLE>

That would be fine if they are in the $85 price range. I haven't researched this much. Just know that someone has the s2k for sale. I am betting the s2k is not a good idea since they run duals I bet the inlet is smaller than an ITR muffler. Anyone care to confirm?

Thanks!

Ricey McRicerton

http://www.passwordjdm.com has the full CTR/ITR catbacks for like 270.

Fuster_Cluck

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Ricey McRicerton &raquo;</TD></TR><TR><TD CLASS="quote">http://www.passwordjdm.com has the full CTR/ITR catbacks for like 270. </TD></TR></TABLE>

Well, I don't really want to replace the entire piping right now as I may be going turbo later this year. I'm happy with the 2.5" piping I have right now. Just looking to get rid of the coffee can

Del"TheSolMan"

I think it would cost you more trying to get the S2K mounted then it would to just buy a new exhaust system.

The S2K exhaust system is A: Huge B: Heavy as **** C: Made for the S2K and yes is a dual exhaust

Fuster_Cluck

You miss understood me. I want to get rid of the muffler I currently have and get something that looks more like OEM and that is also quieter...... My piping is fine so I'm just asking about the s2k muffler. Not the entire s2k exhaust system.

Duals on a civic

Del"TheSolMan"

I know what you were asking... I just believe you don't know what your asking... here's a pic of a stock S2K exhaust.

Ricey McRicerton

I'd say grab the passenger side canister, as the hangers look closer to what you need. Take one up to a muffler shop and they should be able to put it on.

FrostySol

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Ricey McRicerton &raquo;</TD></TR><TR><TD CLASS="quote">I'd say grab the passenger side canister, as the hangers look closer to what you need. Take one up to a muffler shop and they should be able to put it on. </TD></TR></TABLE>

yeah, it doesn't look like it would be too hard or expensive to mod to fit what you have.

E-Rok

keep in mind it is designed to be used with dual exhaust, therefore probably doesnt flow as well as a ITR muffler because of that. the pi;ing going to it looks pretty small.

cyman83

i was in the same position as you were.. between s2k muffler or itr muffler. i did some research and found out that inlet on the s2k is only 2" compared to 2.25" on the itr. get the itr if u want to stay with the oem look.

skip.two

go with the itr exhaust. looks much better for a stock exhaust IMO.

Smith Wise

i just picked up a oem si em1 exhaust for my ek

loud exhuast

i'm too lazy to get to a muffler shop though so it's just sitting on my balcony...

paid $50

aLL MoToR Eg6

I also heard that the oem s2000 muffler is very heavy i was going to run that on my hatch but did not do it due to the weight on just one of theose canisters...

Del"TheSolMan"

I can vouch... the S2K exhaust is a pig compared to a DC2 exhaust.....

Transport

s2k muffler will scream at around 5k plus. i have the stock 03 si muffler. dual tip. i got two, so quad set up on my del sol. looks really clean and sporty loud...not as loud as s2k or even 350Z but looks clean. i think dual tip 03 si looks nice on ek or eg hatches too

FrostySol

^got any pics of this? Sounds interesting...

D50boy

I have a single S2k muffler on my hatch. If WE-TODD-DID wasn't down right now, I'd post it a good pic.

TheGSRGuy

Anyone have the dimensions of the S2000 muffler?

Also, I was under the impression that it is a twin-pass muffler. Anyone have a picture of the backside of the muffler?

dantastic

why not just do it right ONCE and get a quality cat-back?? with all the $$ u spend trying to piece together a system, you can buy a used apexi ws or something

mrctr

actually the inlet is bigger than the itr.....i bought one for 40.00 and sold it to my homie....who put the s2k muffler on his eg.....fit almost perfect before someone rearended him.....

JDMb18civic

actually a friend of mine had one in his EG...
i think it was to big for the EG cuz it was rubbing like crazy...
as for the soundwise it was pretty quiet just like any other stock muffler

btw..the s2k muffler has the twin loop design like the mugen muffler does

Fuster_Cluck

I was just planning on having one of the mufflers cut right at the inlet and welding to my 2.5" piping. Does anyone have a pic of the muffler mounted on an Eg? Did you weld right at the inlet of the muffler?

TheGSRGuy

I'm actually wondering if passenger side is the way to go for a DC2 application?