FS : Vacuum/Fluid Distribution Block - 3, 4 and 5 port anodized blue satin
#1
Honda-Tech Member
Thread Starter
Join Date: Sep 2000
Location: Russian Mafia, dont, provoke, me
Posts: 1,582
Likes: 0
Received 0 Likes
on
0 Posts
FS : Vacuum/Fluid Distribution Block - 3, 4 and 5 port anodized blue satin
I got a lot of interest from the vacuum block I sold in this thread https://honda-tech.com/zerothread?id=728795
so I did some searching and found the last of them. there is so many different ways to use them, with the five port you can really clean up a lot of vacuum lines and I think the part looks trick, this is what I have :
2x 5 port
6x 4 port
1x 3 port - (I used this one for dual fuel rail feed on a friends car, way cheaper than a $90 Y block)
I also have some fittings :
4 x 1/4" barb
6x 3/8'" barb
1x pipe plug
This is an idea of what you can do:
prices:
5 port 20 + 3 dollars shipping to Canada and lower 48
4 port 18 + 3 dollars shipping to Canada and lower 48
3 port 14 + 3 dollars shipping to Canada and lower 48
fittings are 1 dollar each shipped free with any block, pipe plug is 50cents.
email me with questions Vgutnik@hotmail.com paypal is the same
so I did some searching and found the last of them. there is so many different ways to use them, with the five port you can really clean up a lot of vacuum lines and I think the part looks trick, this is what I have :
2x 5 port
6x 4 port
1x 3 port - (I used this one for dual fuel rail feed on a friends car, way cheaper than a $90 Y block)
I also have some fittings :
4 x 1/4" barb
6x 3/8'" barb
1x pipe plug
This is an idea of what you can do:
prices:
5 port 20 + 3 dollars shipping to Canada and lower 48
4 port 18 + 3 dollars shipping to Canada and lower 48
3 port 14 + 3 dollars shipping to Canada and lower 48
fittings are 1 dollar each shipped free with any block, pipe plug is 50cents.
email me with questions Vgutnik@hotmail.com paypal is the same
#2
Re: FS : Vacuum/Fluid Distribution Block - 3, 4 and 5 port anodized blue satin (rtype11)
bump for good prices whats the difference from using plastic t's? besides looks. better vacuum?
#3
Honda-Tech Member
Thread Starter
Join Date: Sep 2000
Location: Russian Mafia, dont, provoke, me
Posts: 1,582
Likes: 0
Received 0 Likes
on
0 Posts
Re: FS : Vacuum/Fluid Distribution Block - 3, 4 and 5 port anodized blue satin (egturbo)
thanks, differences between tees and this - the truth?? well basically elimination of multiple tees, this also allows you to technically "tee" different diameter hose since you can use 1/8, 1/4, 3/8" barb fittings like in my pic with the short hose I tried to demonstrate that, it is hard (read: impossible)to find a plastic tee with 1/4, 1/8, 3/8. also might aid in dissassembly since you can detach the vacuum feedhose and leave all gauges and BOV, EBC and such with their original vacuum routing. forget all that, its just a cool part if you ask me
#4
Honda-Tech Member
Thread Starter
Join Date: Sep 2000
Location: Russian Mafia, dont, provoke, me
Posts: 1,582
Likes: 0
Received 0 Likes
on
0 Posts
Re: FS : Vacuum/Fluid Distribution Block - 3, 4 and 5 port anodized blue satin (rtype11)
thanks for payment Rudebwoy, will mail out tomorrow once you tell me what fittings to include. one five port block left
#5
Honda-Tech Member
Thread Starter
Join Date: Sep 2000
Location: Russian Mafia, dont, provoke, me
Posts: 1,582
Likes: 0
Received 0 Likes
on
0 Posts
Re: FS : Vacuum/Fluid Distribution Block - 3, 4 and 5 port anodized blue satin (rtype11)
everyone thanks for your interest, pls dont send me money before telling me what combo you want of fittings and blocks.
cheers.
cheers.
#7
Honda-Tech Member
Thread Starter
Join Date: Sep 2000
Location: Russian Mafia, dont, provoke, me
Posts: 1,582
Likes: 0
Received 0 Likes
on
0 Posts
Re: FS : Vacuum/Fluid Distribution Block - 3, 4 and 5 port anodized blue satin (LIBOR VR6)
thanks for payment LIBOR, ill drop it off monday, shipping will be my gas money
Trending Topics
#11
Member
Join Date: Mar 2002
Location: Dallas Sewers, Usa
Posts: 6,018
Likes: 0
Received 0 Likes
on
0 Posts
Re: FS : Vacuum/Fluid Distribution Block - 3, 4 and 5 port anodized blue satin (rtype11)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by rtype11 »</TD></TR><TR><TD CLASS="quote">[img]http://www.imagesThis is an idea of what you can do:
</TD></TR></TABLE>
In my pm this is the picture im talking about
</TD></TR></TABLE>
In my pm this is the picture im talking about
#12
Honda-Tech Member
Thread Starter
Join Date: Sep 2000
Location: Russian Mafia, dont, provoke, me
Posts: 1,582
Likes: 0
Received 0 Likes
on
0 Posts
Re: FS : Vacuum/Fluid Distribution Block - 3, 4 and 5 port anodized blue satin (quikB18B)
message answered, the manifold can be mounted anyway you want, the single port does not have to up top and it can be side fed if you remove the pipe plugs at the ends.
let me know if you have more questions, I am currently all out of 1/8" barb fittings, will have more thursday.
let me know if you have more questions, I am currently all out of 1/8" barb fittings, will have more thursday.
#13
Junior Member
Join Date: Jan 2004
Location: Not in the United Kingdom.
Posts: 645
Likes: 0
Received 0 Likes
on
0 Posts
Re: FS : Vacuum/Fluid Distribution Block - 3, 4 and 5 port anodized blue satin (rtype11)
Vacuum manifolds allow you to run bigger vacuum lines. Along with a bigger fitting for my wastegate, this stopped my boost creep all together. It also helped with getting a better signal to my BOV, which stopped the fluttering all together.
Free bump, nice manifolds at a good price.
Free bump, nice manifolds at a good price.
#14
Honda-Tech Member
Thread Starter
Join Date: Sep 2000
Location: Russian Mafia, dont, provoke, me
Posts: 1,582
Likes: 0
Received 0 Likes
on
0 Posts
Re: FS : Vacuum/Fluid Distribution Block - 3, 4 and 5 port anodized blue satin (MadCow)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by MadCow »</TD></TR><TR><TD CLASS="quote">Vacuum manifolds allow you to run bigger vacuum lines. Along with a bigger fitting for my wastegate, this stopped my boost creep all together. It also helped with getting a better signal to my BOV, which stopped the fluttering all together.
Free bump, nice manifolds at a good price. </TD></TR></TABLE>
thanks I new we would one day become friends! if your buddy can make more of his I am sure he can sell them for alot more than mine, but wait til mine are gone LOL
https://honda-tech.com/zerothread?id=724755
Free bump, nice manifolds at a good price. </TD></TR></TABLE>
thanks I new we would one day become friends! if your buddy can make more of his I am sure he can sell them for alot more than mine, but wait til mine are gone LOL
https://honda-tech.com/zerothread?id=724755
#15
Member
Join Date: Mar 2002
Location: Dallas Sewers, Usa
Posts: 6,018
Likes: 0
Received 0 Likes
on
0 Posts
Re: FS : Vacuum/Fluid Distribution Block - 3, 4 and 5 port anodized blue satin (rtype11)
Payment sent Via Paypal for 3 port box, let me know when you ship it. Thanks
#16
Honda-Tech Member
Thread Starter
Join Date: Sep 2000
Location: Russian Mafia, dont, provoke, me
Posts: 1,582
Likes: 0
Received 0 Likes
on
0 Posts
Re: FS : Vacuum/Fluid Distribution Block - 3, 4 and 5 port anodized blue satin (quikB18B)
thanks it goes to the post office in an hour,damnsnow!
#17
Honda-Tech Member
Thread Starter
Join Date: Sep 2000
Location: Russian Mafia, dont, provoke, me
Posts: 1,582
Likes: 0
Received 0 Likes
on
0 Posts
Re: FS : Vacuum/Fluid Distribution Block - 3, 4 and 5 port anodized blue satin (rtype11)
Got a few more left for anyone that is interested.
#21
I was the guy that purchased that original block in the other thread...
In response to your email Vadim, I recieved it a couple weeks ago but havent installed it yet due to some other problems. Thanks man!
In response to your email Vadim, I recieved it a couple weeks ago but havent installed it yet due to some other problems. Thanks man!
#22
Honda-Tech Member
Thread Starter
Join Date: Sep 2000
Location: Russian Mafia, dont, provoke, me
Posts: 1,582
Likes: 0
Received 0 Likes
on
0 Posts
Re: (TeamCracka)
got nervous shipping from Canada that it wasnt going to get you without being searched for WMD or Ricin, I like to know when my stuff arrives, let me know if I can help out with your problam at all. thanks again
#24
Honda-Tech Member
Thread Starter
Join Date: Sep 2000
Location: Russian Mafia, dont, provoke, me
Posts: 1,582
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Turbo_Siii)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Turbo_Siii »</TD></TR><TR><TD CLASS="quote">i want a 5port, how do i make payment? PM me please
thanks</TD></TR></TABLE>
thanks for your interest, PM sent , paypal accepted and I am out of stock on 3's, 5's and fittings, anyone intererested that has PM'd me will be contacted Monday when I should be replenished.
thanks</TD></TR></TABLE>
thanks for your interest, PM sent , paypal accepted and I am out of stock on 3's, 5's and fittings, anyone intererested that has PM'd me will be contacted Monday when I should be replenished.