PRO FAB INTAKE GASKETS
12-15-2003, 08:38 PM
#1
Thread Starter
Join Date: Jun 2002
Location: PORN CAPITAL OF THE WORLD, Ca, usa
Posts: 3,599
Likes: 0
Received 0 Likes
on
0 Posts
PRO FAB INTAKE GASKETS
There are alot of question on why some people dont run Insulated gaskets on hi boost appl.? Take a look at these new gaskets made by PRO FAB.These gaskets will take HI HORSE POWER without leaking or melting problems. They are made out of G10 PHENOMIC.?? i think thats how you spell it?? Top fuel dragsters us these supposely?? anyone have any ideas 
PRO FAB Gaskets and Hondata/AN-R gaskets
This is what happenes over a long period of time. The plastic warps and melts with fuel and heat.
I dont think anyone was aware of this situation until now.[/B] .
With these gaskets you dont need to cut, shave, clean, modify, port, drill, or any work,simply bolt on and fire up.
PRO FAB Gaskets and Hondata/AN-R gaskets
This is what happenes over a long period of time. The plastic warps and melts with fuel and heat.
I dont think anyone was aware of this situation until now.[/B] .
With these gaskets you dont need to cut, shave, clean, modify, port, drill, or any work,simply bolt on and fire up.
12-15-2003, 08:45 PM
#2
Honda-Tech Member
Join Date: Jan 2002
Location: Boise, ID
Posts: 2,466
Likes: 0
Received 0 Likes
on
0 Posts
Re: PRO FAB INTAKE GASKETS (camp1320.com)
Please forgive the newbie question but I take it that the stock studs will no longer work (too short or something) and that is why they supply you with new bolts?
Thanks
Thanks
12-16-2003, 05:35 AM
#6
a/k/a Jomo
Join Date: Jan 2002
Posts: 6,275
Likes: 0
Received 0 Likes
on
0 Posts
Re: PRO FAB INTAKE GASKETS (camp1320.com)
I'm guessing maybe G10 Phenolic maybe? As in Phenolic spacers? People have been running these forever. The idea seems to be a good one and the quality looks top notch to me.
Better then the Hondata plastic style one, which I was never personally a fan of.
Better then the Hondata plastic style one, which I was never personally a fan of.
12-16-2003, 06:50 AM
#7
Honda-Tech Member
Re: (RLZengineEJ6)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by RLZengineEJ6 »</TD></TR><TR><TD CLASS="quote">and how much are these?</TD></TR></TABLE>
Trending Topics
12-16-2003, 07:31 AM
#9
Re: (-BEN-)
you may want to clear up which one is the hondata and which one is the profab. You never distiguish which is which and you know how people like to make assumptions 
12-16-2003, 09:13 AM
#10
Junior Member
Join Date: Jan 2003
Location: Dallas, Tx, us
Posts: 630
Likes: 0
Received 0 Likes
on
0 Posts
Re: PRO FAB INTAKE GASKETS (camp1320.com)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by camp1320.com »</TD></TR><TR><TD CLASS="quote">There are alot of question on why some people dont run Insulated gaskets on hi boost appl.? Take a look at these new gaskets made by PRO FAB.These gaskets will take HI HORSE POWER without leaking or melting problems. </TD></TR></TABLE>
How do you know that these wont melt like the Hondata one?
How do you know that these wont melt like the Hondata one?
12-16-2003, 12:00 PM
#11
Honda-Tech Member
Join Date: Sep 2000
Location: Sears Point, CA
Posts: 5,276
Likes: 0
Received 0 Likes
on
0 Posts
You're doing an inadequate comparison, you're showing a highly used Hondata gasket that's white(will show more discoloration) vs a brand new brown gasket.
My Hondata gasket has ~58,000 miles on it, ~6 track days, ~20+ autocross days, and ~200 drag runs and doesn't look as beat up as the gasket that you posted up.
Austin
My Hondata gasket has ~58,000 miles on it, ~6 track days, ~20+ autocross days, and ~200 drag runs and doesn't look as beat up as the gasket that you posted up.
Austin
12-16-2003, 02:48 PM
#12
New User
Join Date: Oct 2001
Location: Miami, FL
Posts: 2,143
Likes: 0
Received 0 Likes
on
0 Posts
Re: PRO FAB INTAKE GASKETS (camp1320.com)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by camp1320.com »</TD></TR><TR><TD CLASS="quote">There are alot of question on why some people dont run Insulated gaskets on hi boost appl.? </TD></TR></TABLE>
Wrong Forum maybe?? High Boost apps???
My hondata gasket took plenty of all motor power for a long time! No probs, but i need another one already...how much are these going for? and are u selling them at camp1320?
Wrong Forum maybe?? High Boost apps???
My hondata gasket took plenty of all motor power for a long time! No probs, but i need another one already...how much are these going for? and are u selling them at camp1320?
12-16-2003, 04:12 PM
#14
Honda-Tech Member
Join Date: Sep 2001
Posts: 438
Likes: 0
Received 0 Likes
on
0 Posts
Re: PRO FAB INTAKE GASKETS (camp1320.com)
1. the pictured gasket is not an an-r gasket
2. you do not need to cut, shave, clean, modify, port, drill our gaskets, they are direct bolt on
3. our gaskets do not melt.
4. they are not poor quality ("The AN-R race gaskets fit better than the Hondata Race gaskets, so you won't need to modify them (as much - I found a port shoulder section that needed a little grinding). I don't know about the street stuff tho. I've never used those.") at almost half the price of hondatas gasket they are a bargain
quote taken from https://honda-tech.com/zerothread?id=679933
our gasket:
2. you do not need to cut, shave, clean, modify, port, drill our gaskets, they are direct bolt on
3. our gaskets do not melt.
4. they are not poor quality ("The AN-R race gaskets fit better than the Hondata Race gaskets, so you won't need to modify them (as much - I found a port shoulder section that needed a little grinding). I don't know about the street stuff tho. I've never used those.") at almost half the price of hondatas gasket they are a bargain
quote taken from https://honda-tech.com/zerothread?id=679933
our gasket:
12-16-2003, 09:02 PM
#15
Honda-Tech Member
Join Date: Jan 2003
Location: San Diego, CA, USA
Posts: 3,200
Likes: 0
Received 0 Likes
on
0 Posts
Re: (RLZengineEJ6)
camp has them for $65
and an-R has them for $35
I am waiting for one of them to make them in d series...
not sure how much hondata has them for..
and an-R has them for $35
I am waiting for one of them to make them in d series...
not sure how much hondata has them for..
12-23-2003, 10:15 AM
#16
Honda-Tech Member
Join Date: Nov 2001
Location: ...
Posts: 6,400
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Outsane)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Outsane »</TD></TR><TR><TD CLASS="quote">camp has them for $65
and an-R has them for $35
not sure how much hondata has them for..</TD></TR></TABLE>
Hondata goes for around 60.00
and an-R has them for $35
not sure how much hondata has them for..</TD></TR></TABLE>
Hondata goes for around 60.00
01-29-2004, 07:20 PM
#23
Honda-Tech Member
Join Date: Mar 2001
Location: North East
Posts: 4,295
Likes: 0
Received 0 Likes
on
0 Posts
Re: (non-VTEC)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by non-VTEC »</TD></TR><TR><TD CLASS="quote">now this is a kit:
as soon as they come up with one for the non-VTEC head im deffinatly gonna buy it.......</TD></TR></TABLE>
I run the original outlaw kit oon my car now. eveyone asks what it is. I'ts a phenolic spacer
as soon as they come up with one for the non-VTEC head im deffinatly gonna buy it.......</TD></TR></TABLE>
I run the original outlaw kit oon my car now. eveyone asks what it is. I'ts a phenolic spacer
01-30-2004, 04:05 AM
#25
Honda-Tech Member
Re: PRO FAB INTAKE GASKETS (camp1320.com)
we-todd is down! Does any one have a link to the pro fab kit?
The outlaw kit looks nice and $100 isn't to bad a price
The outlaw kit looks nice and $100 isn't to bad a price