Pics of fuel tank sump? Which one are you guys using?
11-11-2003, 06:20 PM
#1
Honda-Tech Member
Thread Starter
Join Date: May 2001
Location: Tallahassee, FL, US
Posts: 7,190
Likes: 0
Received 0 Likes
on
0 Posts
Pics of fuel tank sump? Which one are you guys using?
Looking for mounting ideas as well as sump recommendations for my new car. I was looking at the competition engineering sump. Anyone else using that one? Plan on using an Aeromotive A1000 pump.
thanks,
Jared
thanks,
Jared
11-11-2003, 06:29 PM
#2
Honda-Tech Member
Join Date: Jun 2002
Location: houston
Posts: 656
Likes: 0
Received 0 Likes
on
0 Posts
Re: Pics of fuel tank sump? Which one are you guys using? (Jared)
the comp and summit and jegs are almost identical, they are all near the same demensions. i have the comp one n my garage. still not on car however.
11-11-2003, 07:01 PM
#4
Honda-Tech Member
Thread Starter
Join Date: May 2001
Location: Tallahassee, FL, US
Posts: 7,190
Likes: 0
Received 0 Likes
on
0 Posts
Re: Pics of fuel tank sump? Which one are you guys using? (2.2Lcivic)
I was told the pump should be the same level or lower than the sump, does that one suck air with lower than 1/4 tank?
BoneStckCivic 
its his car
11-11-2003, 07:22 PM
#6
Honda-Tech Member
Join Date: Feb 2003
Location: South, Florida, USA
Posts: 2,466
Likes: 0
Received 0 Likes
on
0 Posts
Re: Pics of fuel tank sump? Which one are you guys using? (2.2Lcivic)
ask impulse b18c-t he has a sump in his integra. the car is a daily driver to.
11-11-2003, 07:31 PM
#7
Honda-Tech Member
Join Date: Jan 2003
Location: CT, USA
Posts: 5,002
Likes: 0
Received 0 Likes
on
0 Posts
Re: Pics of fuel tank sump? Which one are you guys using? (2.2Lcivic)
Do u realy have to weld in a sump or can u just have the oversized fitting where factory one goes.
Trending Topics
11-11-2003, 07:44 PM
#8
Honda-Tech Member
Join Date: Feb 2001
Location: Tejas
Posts: 6,351
Likes: 0
Received 0 Likes
on
0 Posts
Re: Pics of fuel tank sump? Which one are you guys using? (Turbocivic94)
most of the one I have seen are pretty low, due to the requirement to have to let the fuel "collected " in the sump. Unless if you want to run the line out of the stock fuel tank drain, but you will not be able to let your gas tnak goes below 1/2 point.
stan
stan
11-11-2003, 08:54 PM
#9
Honda-Tech Member
Join Date: Dec 2001
Location: long island, ny, united states
Posts: 12,822
Likes: 0
Received 0 Likes
on
0 Posts
Re: Pics of fuel tank sump? Which one are you guys using? (Turbocivic94)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Turbocivic94 »</TD></TR><TR><TD CLASS="quote">Do u realy have to weld in a sump or can u just have the oversized fitting where factory one goes.</TD></TR></TABLE>
no.. to do it right you should sump the tank, we use the competition engineering sumps on all of our cars.....
no.. to do it right you should sump the tank, we use the competition engineering sumps on all of our cars.....
11-11-2003, 08:57 PM
#10
Honda-Tech Member
Join Date: Dec 2001
Location: long island, ny, united states
Posts: 12,822
Likes: 0
Received 0 Likes
on
0 Posts
Re: Pics of fuel tank sump? Which one are you guys using? (miller)
check out the pic about half way down the page and you can see one out of the car , if you want i can post some more pics of them on cars.. https://honda-tech.com/zerothread?id=563369
Thread
Thread Starter
Forum
Replies
Last Post
EF8 D-UNIT
Honda Accord (1990 - 2002)
11
07-31-2006 10:16 AM
DaveF
Forced Induction
23
10-20-2005 09:16 AM
