Benson Sleeved Blocks
#1
Honda-Tech Member
Thread Starter
Benson Sleeved Blocks
The Benson Signature Series sleeved blocks are the best and strongest block available. NO ONE TOUCHES YOUR BLOCK BUT DAN BENSON. There are no excuses, no dropped sleeves, no decks cut on an angle, no egg shaped bores, no wrong sizes and no problems. Tolerances are held to .0001" (That is one TEN thousandths of an inch)
The $950 plus $50 shipping price INCLUDES the final bore/hone to the perfect size for your pistons. This price also includes your choice of O-rings or stepped deck. Turn around time in his shop is 7 days or less on sleeve installations. Good on all B, D, F, H and K blocks.
For more information on Benson blocks, click on this link.
https://honda-tech.com/zerothread?id=565375&page=1
The $950 plus $50 shipping price INCLUDES the final bore/hone to the perfect size for your pistons. This price also includes your choice of O-rings or stepped deck. Turn around time in his shop is 7 days or less on sleeve installations. Good on all B, D, F, H and K blocks.
For more information on Benson blocks, click on this link.
https://honda-tech.com/zerothread?id=565375&page=1
#3
Member
Join Date: Oct 2001
Location: Butler, PA, usa
Posts: 1,669
Likes: 0
Received 0 Likes
on
0 Posts
Re: Benson Sleeved Blocks (EVOL)
Earl,
As stated in previous IMs to you I plan on pulling the my motor on Nov. 15th or
16th. Do you think I should wait till after the holidays to ship it out or ship it that
next week? Remember I'm gonna have the motor sleeved and you assemble the
bottom end with the parts I supply.
As stated in previous IMs to you I plan on pulling the my motor on Nov. 15th or
16th. Do you think I should wait till after the holidays to ship it out or ship it that
next week? Remember I'm gonna have the motor sleeved and you assemble the
bottom end with the parts I supply.
#5
Member
Join Date: Oct 2001
Location: Butler, PA, usa
Posts: 1,669
Likes: 0
Received 0 Likes
on
0 Posts
Re: Benson Sleeved Blocks (Mase)
Thanks Mase,
Don't know if you remember me or not but I own the twin of your previous car,
have to drop me a line sometime. I'm sure earl when get back to me when he
has the time.
Don't know if you remember me or not but I own the twin of your previous car,
have to drop me a line sometime. I'm sure earl when get back to me when he
has the time.
#6
Honda-Tech Member
Join Date: Dec 2001
Location: The Swamp, FL
Posts: 7,139
Likes: 0
Received 0 Likes
on
0 Posts
Re: Benson Sleeved Blocks (Mikes01GSR)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Mikes01GSR »</TD></TR><TR><TD CLASS="quote">Thanks Mase,
Don't know if you remember me or not but I own the twin of your previous car,
have to drop me a line sometime. I'm sure earl when get back to me when he
has the time. </TD></TR></TABLE>
bump for earl
and yes I remember talking to u, I will be up in PA tuning cars Nov 22nd. Hit me up on PM.
Don't know if you remember me or not but I own the twin of your previous car,
have to drop me a line sometime. I'm sure earl when get back to me when he
has the time. </TD></TR></TABLE>
bump for earl
and yes I remember talking to u, I will be up in PA tuning cars Nov 22nd. Hit me up on PM.
Trending Topics
#8
Honda-Tech Member
Thread Starter
Re: Benson Sleeved Blocks (Mikes01GSR)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Mikes01GSR »</TD></TR><TR><TD CLASS="quote">Earl,
As stated in previous IMs to you I plan on pulling the my motor on Nov. 15th or
16th. Do you think I should wait till after the holidays to ship it out or ship it that
next week? Remember I'm gonna have the motor sleeved and you assemble the
bottom end with the parts I supply.
</TD></TR></TABLE>Before the holidays is fine.
As stated in previous IMs to you I plan on pulling the my motor on Nov. 15th or
16th. Do you think I should wait till after the holidays to ship it out or ship it that
next week? Remember I'm gonna have the motor sleeved and you assemble the
bottom end with the parts I supply.
</TD></TR></TABLE>Before the holidays is fine.
#9
Honda-Tech Member
Thread Starter
Re: Benson Sleeved Blocks (MSchu)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by MSchu »</TD></TR><TR><TD CLASS="quote">.010=ten thousands</TD></TR></TABLE>
No, one ten thousandth= .0001"
one tenth of one one-thousandth= .0001"
Way tight tolerances from a master machinist.
No, one ten thousandth= .0001"
one tenth of one one-thousandth= .0001"
Way tight tolerances from a master machinist.
#11
Re: Benson Sleeved Blocks (MSchu)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by MSchu »</TD></TR><TR><TD CLASS="quote">.010=ten thousands</TD></TR></TABLE>
10,000, 10,000, and 10,000.
10,000, 10,000, and 10,000.
#16
Honda-Tech Member
iTrader: (5)
Join Date: May 2004
Location: R.I.P Brian Arbogast...you will be missed, maryland, USA
Posts: 8,697
Likes: 0
Received 0 Likes
on
0 Posts
Re: Benson Sleeved Blocks (eyeamvic)
What are the pros or cons of going with O-rings or with stepped deck? i want know also because im seding my block to bensonin in one week
#17
Honda-Tech Member
Thread Starter
Re: Benson Sleeved Blocks (TURBO BLUE HATCH)
I hate to say this but the trend is swinging back to flat decks rather than step. We have reduced the deck step down to .001" to .002"
#20
Honda-Tech Member
Thread Starter
Re: Benson Sleeved Blocks (eyeamvic)
o-rings need to be replaced, most people don't have the skills to do that easily.
no maintenance with a step deck.
both ways just help gasket seak a little.
no maintenance with a step deck.
both ways just help gasket seak a little.
#21
Junior Member
Join Date: Nov 2003
Location: Ft. Laudy Daudy, Florida, USA
Posts: 634
Likes: 0
Received 0 Likes
on
0 Posts
sorry if this question is dumb but that price includes the sleeves and the labor or just the labor?
Also does benson assemble the blocks if we sent them the parts?
Also does benson assemble the blocks if we sent them the parts?
#24
Honda-Tech Member
Thread Starter
Re: (TypeRKoncepts)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by TypeRKoncepts »</TD></TR><TR><TD CLASS="quote">sorry if this question is dumb but that price includes the sleeves and the labor or just the labor?
Also does benson assemble the blocks if we sent them the parts?</TD></TR></TABLE>Price includes sleeves, installation and final bore and hone. We can do the assembly with your parts but only if they are good parts.
Also does benson assemble the blocks if we sent them the parts?</TD></TR></TABLE>Price includes sleeves, installation and final bore and hone. We can do the assembly with your parts but only if they are good parts.