doing valve lashing on a zex 59300 cam in a y8. Need help soooon!
#1
Honda-Tech Member
Thread Starter
doing valve lashing on a zex 59300 cam in a y8. Need help soooon!
does anybody know the specs of what I need to set the intake and exhaust valves at? Thanx.
#2
Honda-Tech Member
Join Date: Jul 2002
Location: Chicagoland, usa
Posts: 5,695
Likes: 0
Received 0 Likes
on
0 Posts
Re: doing valve lashing on a zex 59300 cam in a y8. Need help soooon! (SOHC_MShue)
#4
Re: doing valve lashing on a zex 59300 cam in a y8. Need help soooon! (SOHC_MShue)
Make sure your valves are not too tight or too loose, otherwise his car will run like ****. Mine did with my Crower stage 2, because they were adjusted too loose.
#5
Honda-Tech Member
Thread Starter
Re: doing valve lashing on a zex 59300 cam in a y8. Need help soooon! (BMac86)
yea he had the valve bolts majorly loose at first, but went back and fixed them. It runs fine now
Thread
Thread Starter
Forum
Replies
Last Post
The Lobster
Honda Civic / Del Sol (1992 - 2000)
16
09-21-2006 09:28 AM
B18C5-EH2
Honda Civic / Del Sol (1992 - 2000)
8
11-14-2005 06:07 PM