whoDAT

i've have seen this done to ek's and dc's, but haven't seen if anyone has tried this to stock EG headlights. if anyone has done this or have seen it, please post pictures and if possible, a how-to. thanks for reading

Spooled1.6L

do you have an pictures or names of people have done it to EKs. Cause I got the projectors and hat the fitment. I though about hacking them apart and trying to get them into the stock housing.

6SPD_EK

iTrader: (2)

ummmm...search - where have you guys been? https://honda-tech.com/zero...age=2 check out the whole topic (EK & EG's)

phantom_sol

i've got i30 projectors in my del sol, needing to make a shield for it though, fromt he corner it glares abit. doesnt mess with the cut-off line but definately lights upt he signs fromt he side lol

whoDAT

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by adirondackR &raquo;</TD></TR><TR><TD CLASS="quote">ummmm...search - where have you guys been? https://honda-tech.com/zero...age=2 check out the whole topic (EK & EG's)</TD></TR></TABLE>

ooops, my bad, hehehehe. thanks alot man!

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by phantom_sol &raquo;</TD></TR><TR><TD CLASS="quote">i've got i30 projectors in my del sol, needing to make a shield for it though, fromt he corner it glares abit. doesnt mess with the cut-off line but definately lights upt he signs fromt he side lol </TD></TR></TABLE>

got any pics?

phantom_sol

i will take some tonight

phantom_sol

ok please bear with me, i had trouble with camera settings and i didnt have a tripod. it may be a little dark but i tried. keep in mind that the del sols never had aftermarket headlights so all i had were the stock fluted lenses. it flares a little above the the cutoff line but it beats stock. it still doenst blind everyone so i'm still happy.... flame if you must, but again, i tried my best. both retro and pictures...

startup


projector


funky cutoff (It glares a little above the cutoff because lenses are fluted)





picture with high beam


most the pictures make the HID look blue, but its actually white. i'll get daytime shots if anyone wants to see more. projector looks better during day





Modified by phantom_sol at 2:53 PM 10/10/2003

Archidictus

My little brother, Hachy-ownzjo0, has HIDs on his stock EH headlights. Search for his threads.

phantom_sol

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Archidictus &raquo;</TD></TR><TR><TD CLASS="quote">My little brother, Hachy-ownzjo0, has HIDs on his stock EH headlights. Search for his threads.</TD></TR></TABLE>

projectors or just bulbs?

bulb in stock housing are crazy bright

Apex i ITR

Not on mine.

I didn't blind anyone using my stock headlights or my aftrmarket ones right now.

phantom_sol

got any pics of the cutoff? i hate how mine rounds out

anyone know any place who do custom lexan molding, its nearly impossible to find any clear headlights for sols. unless someone is holding out on me

phantom_sol

last pic, i promise

Jonathan_ED3

That looks great. Where'd you get the projectors?

phantom_sol

ebay

280 shipped for
infinity i30 projectors,ballasts and two bulbs.

but again i wish that they made aftermarket headlights for the sol, so it isnt all fluted (lines running across the headlight). it would improve the cutoff line a lot

AmginE

good job!!

post a howto

locass316

not bad. i dig it.

CunninLynguist

Question for all you HID guru's

Q: What would be the best head lamps to use for a hid retrofit?

A: Eg stanley head lamps
B: Stock eh head lamps
C: Those projectors - Dont really want to get those projectors.

I would like to use the projectors with the hid setup.

phantom_sol

whatever aftermarket headlight that has non fluted lenses (where the glass is all clear)

just in my case, del sol's have no love, so no aftermarket headlights.

are the stanley clear lensed? if so then i'd recomend those. theres another person on this board who has retroed projectors into his aftermarket projector headlights. he was pretty happy with the results. basically he replaced the shitty projector it came with, witht he HID projector, so the cutoff line was nice and neat.

but personaly it would be easiest to retro into a stock like housing. as long as the lens is clear and not fluted then outcome and beam pattern would be better. also you will get a better look at the projector and would look kick ***.

good luck

ThisLittleSleepeR

dont know what to do with it, but i have a pair of projector headlights for an eg, make me an offer try to do something with it.

milo

well here's mine https://honda-tech.com/zerothread?id=622672&page=2
im really glad i did this project. if you like driving at night, this is definately worth it, i kid you not. i actually drive my car at night now more often because hid's make you feel good
i wouldnt do a retrofit on headlight housing w/ fluted lenses, it will be bright but the beam pattern on the ground will not be as nice. this is why i used my old projectors because of the nice clear glass on the housing.


i also have these headlights. notice the nice clear lens - this will probably be my next retrofit project when i get some extra cash

CunninLynguist

Can someone explain fluted?



Are these fluted?

OT: pic is property of slowasscx

mycivicstoo(s)low

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Scot project &raquo;</TD></TR><TR><TD CLASS="quote">Can someone explain fluted?
Are these fluted?

OT: pic is property of slowasscx </TD></TR></TABLE>yes

Squirtin EGsr

heres some videos from my friends HIDs they are IS300 OEM same ones i sell i think they look very good !!

http://www.imagestation.com/album/?id=4288854487

This is a pic of it (not that good of a pic)



Modified by RiceRocket12s at 9:34 AM 10/15/2003

phantom_sol

:\ CANNOT VIEW

6SPD_EK

iTrader: (2)

take off the .orig.jpg knucklehead

if you are trying to make a sales pitch you will need better pics & pics of the cutoff - how much glare are you getting, looks like it MAY be a lot -

in the pic, is that guy using any sort of shield -besides the OEM one in the housing????