civickidd99

I searched and found nothing for what I searched. I need a new backseat I just want to see if anything looks better than a stocker. Thanks!

JaeOne3345

first of all you need to tell us whether or not you have the hatch (92-95), or a coupe (93-95). Im not sure about sedan but a hatch could use a 3 door integra rear seat with little modification, while a coupe could use a 4 integra rear seat with little modification.

civickidd99

damn...I'm sorry, I must have had a brain fart...it's a hatch. Thanks!

B18Cej1

buy my seats! i have 95 gsr black cloth rear seats, will sell them cheap

Snoopy1

For your hatch, the best fitting integra rear seat is a combination of the upper parts(seat backs) from a coupe(2dr integra) and the bottom cushion from a sedan(4dr integra).

You can use the whole coupe(2dr integra) rear seat and it will fit, but the bottom cushion will have major gap on each side where the metal floor pan will be visible. If you get the sedan bottom cushion, then the gap is almost completely gone and looks and fits much better.

But you have to use the coupe(2dr) upper seat backs no matter what, cause the sedan(4dr) will not fit.

I have the coupe upper and sedan lower seat from a 97 integra special edition leather, and my bottom cushion fits very well, and also doesn't have that gay plastic tray in between either like all the coupe seats have.

FcUK It.

gsr's fit, they're have a tiny gap though

92hondaGSRchick

I have the leather GSR seat front and back and they are super nice. The back seats don't line up exactly but the look good and are comfortable

93EH6

To get the integra seats to fit right you need the 2dr backs and the 4dr bottoms

Snoopy1

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 93EH6 &raquo;</TD></TR><TR><TD CLASS="quote">To get the integra seats to fit right you need the 2dr backs and the 4dr bottoms</TD></TR></TABLE>

umm.....3 posts up

hahaha, I beat ya. Speak on it

jonnybravo

Supposedly the EF rear backs fit. I want the JDM ones since they have headrests.

andrew714

yo! ill sell ya my gsr rear leather seats. im from so cal! hit me up!

DaiJekBok

Using the 4-door Integra seat cushion in the back of a hatch -- do the one bolt hole "loop" and two mounting tabs line up, or is it just preferred because it's a little wider than the Integra coupe cushion?

Thanks!

jwcrx23

yes the ef rears do work mine are blue leather and actually take up less space than the stock eg seats

B18EG6

using the 2 door teg back seat cushions, how do you modify it to fit in a hatch?

Isnt the metal hanger on the other side of the seat, compared to the civic? Do you just drill and tap, any need to worry about the gas tank?

minime92

I'll take them off your hand. I just wanna know how much and does this include the front seats too?