MySiK24

Thought I would keep everyone informed on how the K24 powered Si was doing. The only change since the last time I posted numbers is a Zex 65 shot.

Latest numbers:
I/H/E/b-pipe/K24
170hp and 150ft/lbs

I/H/E/b-pipe/K24/65 shot
225hp and 246ft/lbs

I will post the actual dyno's, just haven't had time to scan them in. I thought the numbers were pretty good, the torque is ridiculous right when you hit the button, but comes down after that.
Still to come in the next month (I know I said that before, but they really are coming)... custom Racing Intake Manifold, custom Cams, a bigger shot and hopefully something to deal with the computer.

sinical-ep3

What spec K24 is it? Is it just like a normal Element/CRV K24, or a TSX (or maybe a frankenstein K24)?

JUN JDM

good #'s

BenMara

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by sinical-ep3 &raquo;</TD></TR><TR><TD CLASS="quote">What spec K24 is it? Is it just like a normal Element/CRV K24, or a TSX (or maybe a frankenstein K24)?</TD></TR></TABLE>

ATS*Mark

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by JUN JDM &raquo;</TD></TR><TR><TD CLASS="quote">good #'s</TD></TR></TABLE>

not for a k24.......

k-series

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by TURSpoonEK &raquo;</TD></TR><TR><TD CLASS="quote">

not for a k24.......</TD></TR></TABLE>

Yeah they are....it's not the TSX K24 it's a Franenstein (K20A3/K24).

Steve

B18CXr

it's a Franenstein (K20A3/K24)

incorrect, this is for a plain K24 with PNA head

"they" can correct me if I'm wrong......

ATS*Mark

so it doesnt have the ivtec head?

B18CXr

so it doesnt have the ivtec head?


every K-series motor on the planet has "I" vtec......

ATYPR

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by MySiK24 &raquo;</TD></TR><TR><TD CLASS="quote">
I/H/E/b-pipe/K24/65 shot
225hp and 246ft/lbs

</TD></TR></TABLE>

246 torque???

ATYPR

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by TURSpoonEK &raquo;</TD></TR><TR><TD CLASS="quote">so it doesnt have the ivtec head?</TD></TR></TABLE>

Like Jack said, all Ks have iVTEC. The CRV only has vtec on the intake side, the TSX and RSX-S have vtec on both.

Filliam H. Muffman

you speak LIES!
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by FUCATYPR &raquo;</TD></TR><TR><TD CLASS="quote">

Like Jack said, all Ks have iVTEC. The CRV only has vtec on the intake side, the TSX and RSX-S have vtec on both.</TD></TR></TABLE>

any race tuned TODA RSX will have vtc killers and vtec killers

making it the b18b of the k series

Filliam H. Muffman

and which k series have i-vtec on both cams?

k20em2

Mysik24, have you guys taken the car out to the track yet? I'd like to see how it runs.

9200RPM

Jack...I've heard about your car....Scary man.....Keep up the good work!!!

mateo

sound great... not to much nos/w/ out fuel management dude!
....mateo

k-series

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by B18CXr &raquo;</TD></TR><TR><TD CLASS="quote"> it's a Franenstein (K20A3/K24)

incorrect, this is for a plain K24 with PNA head

"they" can correct me if I'm wrong......</TD></TR></TABLE>

Whoops! For some reason I though it was your car.


Steve

B18CXr

and which k series have i-vtec on both cams?


none

MySiK24

Just to verify, It is just a straight 2002 CR-V K24 w/ stock cams, stock head, etc. That's w/ just bolt ons and a 65 shot. In stock trim with the K24 motor (stock e/h/i/everything), it put down 140. So now with the nitrous it has gained 85hp. The torque is a weird number since it jumps up when you hit the button and then drops pretty quickly after that. But you will see that when I finally dowload the graphs.

It has been to the track once w/ nitrous, but the numbers weren't very good. My fiance drove it most of the day and wasn't getting out of the whole. I got to drive it for the last three runs but could still only manage...
14.2@101
14.1@101
14.0@102
Thats w/ 2.3 60fts and not spraying until 2nd. Flavia got one pull in at 14.2 but couldn't get there again (the arming switch was kind of ghetto rigged since there wasn't enough time to mount the switch. So I finally used zip ties and tied it to the shift *** before I ran it. Probably why I was actually able to run better than her without much bottle left.)

The times sucked, but the mph was OK. Hope to make it back soon w/ a little bit of suspension work.

honda_pilot

Wow, those are some pretty decent numbers on that K24. But one question why did you choose nitrous, and aren't looking at going FI? This is certainly relative to the previous B18B turbo... its going to be the next generation of that motor.

Is FI coming in the future? Props for what you're trying to do here man...

Casey

iTrader: (5)

so you were the guy with girl in the black ep3 at the battle eh? I am the fubar'd front 92 hatch that was in the fun run class too

MySiK24

That was us!!! Slow times and all!!!

As far as why we went Nitrous??? Our goal from the beginning of this project was to try and see how this motor took to different mods and how far it could take us. So far we are very pleased with the power, but hope to get the times down to where they should be. Forced Induction is definately in the future!

Thanks for the support!