bpetruzzo

Ok, I've been working on moving the power windows and locks over from my '94 Ex to my '92 Hatch DX, which is proving to be more complex than I would have guessed. I've so far been able to get all the the mechancial equipment from the EX to the DX driverside, but the wiring has got me all choked up.

When we pulled the wires out of the car we had two connectors, one with 3 wires ( I think) going into it, and that plugged into the back of the fuse box, we then also had a second ceonnector with two wires (I think), which didn't seem to go anywhere, I think they're speaker wires. Finally we now have 10 - 15 snipped wired that we have no idea where to send. When we plugged the window relay in, and plugged up all the wires we can plug up the window did not work.

In the process I have managed to completely remove the interior of my car, looking for some magical set of wires that will make this work. Well, I have to go to work in the morning, and can't very well do so without seats. Can anyone tell me if its safe to put the car back togethar? I mean, is there anything I'm going to need in some obscure place under the carpet?

Any thoughs? Maybe I'm too big a moron to do this.

bpetruzzo

...no one wants to help me..?

INVALID

Try messaging Hybrid95CivicEX

https://honda-tech.com/zerothread?id=599441

https://honda-tech.com/zerothread?id=521750

https://honda-tech.com/zerothread?id=430208 (read the last post)

Benbuilt4u

I just did this in my hatch and i took the 94 ex harness cut all the loom off then i pulled all the window wires out about 6 of them out of the main harness. then cu the 4 speakers wire out of the main harness rerapped both harness and then just installed it. dont forget the relay for the power windows without that nothing will work.