NorthernXposure

has it been done yet?? are the mounts out? or just prototypes.. once i get an answer ill give you an update to whats going on in my neck of the woods

Newman

Making mounts for it isn't a problem.... I've seen it in the works in an EG chassis (they asked me not to take pictures) but fitment looks fine... just a matter of aligning up everything with motor/tranny placement, hood & ground clearance, and then aligning it up for axles. But they said the motor placement isn't the problem... it's the wiring as you'll have to splice everything from the K20 harness to the Civic and so on. Looks like a B16 in there backwards .

NorthernXposure

a pic i found in one of my local forums.. Im pretty sure its a fluke though

Boosteddc2gsr

do u plan on doing it i give u the thumbs up

J2turbo21

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by NorthernXposure &raquo;</TD></TR><TR><TD CLASS="quote">

a pic i found in one of my local forums.. Im pretty sure its a fluke though</TD></TR></TABLE>

HEHE yea dude that was the pick i posted which i got from a post here.I just wanted to see people in awe

b20_ed

pure madness.......

GSRswapandslow

I'd actually like to do an all-mota setup with a K in my hatch.....maybe after i kill this engine or the next...i might stray away from the boost for a while

b16turbohatch47

i would like to see it done i heard those h20 make some good allmotor power, i would do it if it wasent so much$$$$$$$$$$$$$$$ maybe when the b series start to die out the k series will be cheaper so us mear mortals can afford it plenty or dricks for the wiring time

K20 EG

i would post the updated image ...but i dunno how

J2turbo21

email the pictures to me and i'll host them for you.Shoot me a PM.

usmdspeed

HASPORT HAS THE DIRECT BOLD IN MOUNTS.. i seen the swap done already

K20 EG

for a 92-95 civic ???k-series

ya right ...its not on there website ..and they wont respond to emails

K20 EG

you got mail ...

FF-sean

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by usmdspeed &raquo;</TD></TR><TR><TD CLASS="quote">HASPORT HAS THE DIRECT BOLD IN MOUNTS.. i seen the swap done already</TD></TR></TABLE>
dude do you even know what your saying???
this is EG were talking about not EK
you should ask PACMAN since he knows more than us about K20

J2turbo21

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by K20 EG &raquo;</TD></TR><TR><TD CLASS="quote">you got mail ...</TD></TR></TABLE>

Where you talking to me?I didn't get any pictures yet.

K20 EG

here are some pics for you guys [IMG][/IMG]


Modified by K20 EG at 9:49 PM 7/27/2003

jsalicru

That pic above.. that was me that posted it.. and no.. its no fluke... that was last weekend.. this is THIS WEEKEND.. this picture was taken yesterday..



This car will be running by next weekend... Its got a few bits here and there... the axles are in and straight as an arrow too... Trust me... its no fluke. the mount has been photoshoped cause we dont want anyone to see it just yet...


Modified by jsalicru at 2:21 AM 7/28/2003

xJ.SLOTHx

keep us posted to how the car runs and what not...im also wondering if the motor is stock or not?

jsalicru

THAT I REALLY can't talk about... All I can say is that it will be unique.

H22ek4

How hard was the wiring part??

jsalicru

still being worked out.. I haven't been there and plus hes not really wanting a lot of info to go out just yet... he would like to get it finished off before really getting into some details... he says hes got it figured out.. I have a feeling as to what it is... and if Im right.. it shouldn't be extremely hard

jsalicru

as far as wiring.. .how can I put it... do a LITTLE research... doesn't really take much. and a little logic.. and I think that you can get how.. heres a hint.. it involves looking for info on RSX, 03 Civic, and EGs

MPower332TI

Awesome swap. If i had the cash i would be putting a jdm itr dc5 motor in my car at this very moment. Id love to have that motor in my ek. Pop the hood and people around here would be like what the **** is that.?

K20 EG

The wiring was a challenge ...

everyone asks ...how hard ...well its hard ...mostly takes time

i got if figured out ...im waiting on some parts from acura ...and some lil misc stuff

but the time will come
videos , notes, etc

k_spek

That's just siiiiiiik!

I think I know what motor im gonna go with next.

I can't go back to stock and I already have holes cut for a shifter and shift cables. Looks like its time to start saving.