hughesl

I am ordering my LSD today, and I am not sure which Quaife model to get for this set up. Anybody know?

Thanks

E-AT_me

none.. quaife doesn't make an LSD for your transmission. i went throught this already with my car..

you need to look at KAAZ or other JDM companies.. all b series USDM tranny diffs have different bearings, so only JDM companies will have the right one..

1_bad_EF

I just told Neil at More Power Racing (1877-438-3939 i think) what I had, a cable B16a trans and it was right. $795+ 5.95 s+h

E-AT_me

are you sure? cause the only one i think quaife makes for a cable tranny, is a 92-93 GSR and 90-00 LS.

91SiKen

Inside of the tranny case will need to be modified, but it can be done, Cuz my friend has done it. Don't know all the detials though. My YS1 cable tranny will accept most if not all parts from the hydro trannies.

badCRX

I have a quaife in my J1 tranny. Its the Integra LS/Civic B16 Quaife. Using 90-91 tranny carrier bearings.

hughesl

I think there are two spline sizes. For that model. Which one is correct?

Thanks.

hughesl

I just went back and looked. Actually you answered my question, the different spline size was for the civic and rex. The J1 and S1 tranny should use exactly the same lsd. Thanks