How to install wastegate......
#1
Thread Starter
Join Date: Mar 2003
Location: Atlanta, GA, USA
Posts: 598
Likes: 0
Received 0 Likes
on
0 Posts
How to install wastegate......
I am installing a turbo and I wondering how to isntall a wastegate...... What do I do with the 2 vacuum outputs..... They currently are plugged up with golf tees.... Thank you.
here is a pic
here is a pic
#5
Honda-Tech Member
Join Date: May 2002
Location: California
Posts: 3,047
Likes: 0
Received 0 Likes
on
0 Posts
Re: How to install wastegate...... (BlackB18CTeg)
We don't have the top post hooked up to anything.
Should we hook it up to a vac source?
I'm using the spring to regulate boost.
Should we hook it up to a vac source?
I'm using the spring to regulate boost.
#6
Honda-Tech Member
Join Date: Nov 2001
Location: Bay Area, Ca, United States
Posts: 2,201
Likes: 0
Received 1 Like
on
1 Post
Re: How to install wastegate...... (RyanAutry)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by RyanAutry »</TD></TR><TR><TD CLASS="quote">We don't have the top post hooked up to anything.
Should we hook it up to a vac source?
I'm using the spring to regulate boost. </TD></TR></TABLE>
If your running just the spring u can leave the top port alone....
Should we hook it up to a vac source?
I'm using the spring to regulate boost. </TD></TR></TABLE>
If your running just the spring u can leave the top port alone....
#7
Honda-Tech Member
Join Date: Feb 2002
Location: Dallas, TX
Posts: 4,453
Likes: 0
Received 0 Likes
on
0 Posts
Re: How to install wastegate...... (Cramerox)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Cramerox »</TD></TR><TR><TD CLASS="quote">
If your running just the spring u can leave the top port alone....</TD></TR></TABLE>
If your running just the spring u can leave the top port alone....</TD></TR></TABLE>
Trending Topics
#8
Thread Starter
Join Date: Mar 2003
Location: Atlanta, GA, USA
Posts: 598
Likes: 0
Received 0 Likes
on
0 Posts
Re: How to install wastegate...... (TrboGSR)
just dropped in turbo yesterday, have not been running car.... When you say leave top one alone if using spring, then you mean just leave it open, without the tee or tubE?
#10
Honda-Tech Member
Join Date: Dec 2001
Location: Filthadelphia Area, PA, USA
Posts: 1,568
Likes: 0
Received 0 Likes
on
0 Posts
Re: How to install wastegate...... (BlackB18CTeg)
yes leave it open without anything blocking it. it is there if you are using an electronic boost controller. it would, in the case of an ebc allow you to route boost pressure to the top of the wastegate to hold it shut until the moment you reach your set psi on the boost controller.
#11
Honda-Tech Member
Join Date: May 2001
Location: bay area/socal, CA, USA
Posts: 3,858
Likes: 0
Received 1 Like
on
1 Post
Re: How to install wastegate...... (BlackB18CTeg)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by BlackB18CTeg »</TD></TR><TR><TD CLASS="quote">whats a good place to hook side source up too?</TD></TR></TABLE>
Stock FPR, but prefereably to the brake booster.
Stock FPR, but prefereably to the brake booster.
#12
Thread Starter
Join Date: Mar 2003
Location: Atlanta, GA, USA
Posts: 598
Likes: 0
Received 0 Likes
on
0 Posts
Re: How to install wastegate...... (intekragsr)
damn, if i hooked it up to fps, I would be running two plastic t's. One for boost gauge and one for this. Where is the break booster?
If I get a boost controller, do i need to take out spring?
If I get a boost controller, do i need to take out spring?
#13
Honda-Tech Member
Join Date: Jun 2001
Location: Canada City
Posts: 5,391
Likes: 0
Received 0 Likes
on
0 Posts
Re: How to install wastegate...... (BlackB18CTeg)
wheres the break booster?
you kidding?
you know where your break fluid goes right?
well its that sideways space ship looking thing againts the firewall.
i just hooked mine off of a vac source on the intake mani.
you kidding?
you know where your break fluid goes right?
well its that sideways space ship looking thing againts the firewall.
i just hooked mine off of a vac source on the intake mani.
#15
Honda-Tech Member
Join Date: Nov 2001
Location: Bay Area, Ca, United States
Posts: 2,201
Likes: 0
Received 1 Like
on
1 Post
Re: How to install wastegate...... (BlackB18CTeg)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by BlackB18CTeg »</TD></TR><TR><TD CLASS="quote">damn, if i hooked it up to fps, I would be running two plastic t's. One for boost gauge and one for this. Where is the break booster?
If I get a boost controller, do i need to take out spring?</TD></TR></TABLE>
If you get a MANUAL boost controller or even an ELECTRIC, you do not need to take out the spring. Also the lowest boost setting would be what the spring is.
If I get a boost controller, do i need to take out spring?</TD></TR></TABLE>
If you get a MANUAL boost controller or even an ELECTRIC, you do not need to take out the spring. Also the lowest boost setting would be what the spring is.
#16
Join Date: May 2002
Location: Jinx Proof Brown Noser.
Posts: 620
Likes: 0
Received 0 Likes
on
0 Posts
Re: How to install wastegate...... (SiRkid)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SiRkid »</TD></TR><TR><TD CLASS="quote">
i just hooked mine off of a vac source on the intake mani.</TD></TR></TABLE>
yeah, I have an excellent vac source perfectly suited for a wastegate that's all Honda, factory. I just don't have any Idea what is actually supposed to be going there.
i just hooked mine off of a vac source on the intake mani.</TD></TR></TABLE>
yeah, I have an excellent vac source perfectly suited for a wastegate that's all Honda, factory. I just don't have any Idea what is actually supposed to be going there.
#17
Honda-Tech Member
Join Date: Jul 2002
Location: Columbia, Beaufort,, SC, USA
Posts: 3,603
Likes: 0
Received 0 Likes
on
0 Posts
Re: How to install wastegate...... (T-sohctec)
preludes are like that too... probably someting in canada or someting... u know how they have some weird ****..
#18
Honda-Tech Member
Join Date: Mar 2003
Location: Navarre, Florida
Posts: 1,986
Likes: 0
Received 0 Likes
on
0 Posts
Re: How to install wastegate...... (BoostedH23a1)
Hook that sucker up to your TURBO bro
If u have the Outlet on yout Turbo to do so. If not, hook the side port up to a good vaccum source. U can tap inot your Cruise Control is Neccessary. On my turbo i have a Port on it so i had no worries
If u have the Outlet on yout Turbo to do so. If not, hook the side port up to a good vaccum source. U can tap inot your Cruise Control is Neccessary. On my turbo i have a Port on it so i had no worries
#19
Honda-Tech Member
Join Date: Jul 2002
Location: Columbia, Beaufort,, SC, USA
Posts: 3,603
Likes: 0
Received 0 Likes
on
0 Posts
Re: How to install wastegate...... (Kutsuju_SLeePER)
if i were u i would do that too man.. the way yours is going u need to be extra extra carefull...
#20
Honda-Tech Member
Join Date: Mar 2003
Location: Navarre, Florida
Posts: 1,986
Likes: 0
Received 0 Likes
on
0 Posts
Re: How to install wastegate...... (BoostedH23a1)
Do u have a Boost Controller. If not, then dont worry bout the Top part of the Wastegate. IF u had a Boost controller. Does your hood even close with the top part on. Mine sure didnt when i checked for my own knowlege. U might need an Elbow for the WG.
#21
Thread Starter
Join Date: Mar 2003
Location: Atlanta, GA, USA
Posts: 598
Likes: 0
Received 0 Likes
on
0 Posts
Re: How to install wastegate...... (BoostedH23a1)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by BoostedH23a1 »</TD></TR><TR><TD CLASS="quote">yo man do u need me to come over and help u? (this is lee btw)</TD></TR></TABLE>yep...... u do
#22
Re: How to install wastegate...... (BlackB18CTeg)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by BlackB18CTeg »</TD></TR><TR><TD CLASS="quote">What do I do with the 2 vacuum outputs..... They currently are plugged up with golf tees.... Thank you.
</TD></TR></TABLE>
LOL
</TD></TR></TABLE>
LOL
Thread
Thread Starter
Forum
Replies
Last Post
LilCivic04
Forced Induction
9
07-12-2005 10:25 PM