Big favor all, with 1.8l or 2.0l turbo charged motors please post dyno #'s
#1
Thread Starter
Join Date: Feb 2003
Location: Hopkins, mn, USA
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
Big favor all, with 1.8l or 2.0l turbo charged motors please post dyno #'s
I have a guy that claims all turbos regardless of flow rate will produce the same hp #'s in the same displacement acura motor. I want to prove to him that say a t3/60-1 will generate more hp than a straight t3 @ 10 psi. So please all post your dyno #'s @ 10 psi or whatever psi you did the dyno at along with the size of your turbo, and if possible its flowrate @ whatever psi you dyno'd at. Thanks much
#2
Re: Big favor all, with 1.8l or 2.0l turbo charged motors please post dyno #'s (mwasnp)
This is with a gsr motor, T4 60-1, FMU fuel setup, 10psi, pump gas, and a full 2.5 exhaust. The car just recently made 440whp on race fuel and 17psi.
#4
Member
Join Date: Apr 2001
Location: San Grabiel Valley, South Cali, USA
Posts: 1,121
Likes: 0
Received 0 Likes
on
0 Posts
Re: Big favor all, with 1.8l or 2.0l turbo charged motors please post dyno #'s (itr206)
got damn ITR206 that is some crazie *** ******* number for 8 lbs!!!! GOOD ****!! I guess high comp + turbo + tune = VERY POWERFUL =P
#6
Honda-Tech Member
Re: Big favor all, with 1.8l or 2.0l turbo charged motors please post dyno #'s (swlabhot)
thats at the wheels.
the timing retard we have set is .75 degrees per lb of boost.
yea it seems to work nicely for me , BOOSTEDHYBRID is a great tuner.
the timing retard we have set is .75 degrees per lb of boost.
yea it seems to work nicely for me , BOOSTEDHYBRID is a great tuner.
Trending Topics
#9
Honda-Tech Member
Re: Big favor all, with 1.8l or 2.0l turbo charged motors please post dyno #'s (mwasnp)
actually we lowered the vtec and picked up a few more hp and cleaned up the TQ curve more. belive it or not . it might be hard to see there, becuase i didnt plot the tq graph, but its true .
#10
Junior Member
Join Date: Jun 2002
Location: sacramento, CA, USA
Posts: 99
Likes: 0
Received 0 Likes
on
0 Posts
Re: Big favor all, with 1.8l or 2.0l turbo charged motors please post dyno #'s (mwasnp)
243.2HP 190.2ft/lb torque at 9psi on a GSR with a straight T3.
SAFC
RC 370cc injectors
Vortech FMU
Comptech ESM
SAFC
RC 370cc injectors
Vortech FMU
Comptech ESM
#12
Honda-Tech Member
Re: Big favor all, with 1.8l or 2.0l turbo charged motors please post dyno #'s (autoEXturbo)
This is with a gsr motor, T4 60-1, FMU fuel setup, 10psi, pump gas, and a full 2.5 exhaust. The car just recently made 440whp on race fuel and 17psi.
#13
Re: Big favor all, with 1.8l or 2.0l turbo charged motors please post dyno #'s (Bryson)
at one point it sure did unfortunately . Things were figured out and it's running fine now. Like i said, it just made 440whp this weekend
#14
Thread Starter
Join Date: Feb 2003
Location: Hopkins, mn, USA
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
Re: Big favor all, with 1.8l or 2.0l turbo charged motors please post dyno #'s (autoEXturbo)
For some reason the guy still thinks that a t3 would make the same amount of hp as a t4/60-1 @ 10 psi, you guys agree?
#16
Junior Member
Join Date: Dec 2001
Location: enola, PA, USA
Posts: 404
Likes: 0
Received 0 Likes
on
0 Posts
Re: Big favor all, with 1.8l or 2.0l turbo charged motors please post dyno #'s (mwasnp)
For some reason the guy still thinks that a t3 would make the same amount of hp as a t4/60-1 @ 10 psi, you guys agree?
#18
Junior Member
Join Date: Mar 2002
Location: V8 Land, State of, USA
Posts: 372
Likes: 0
Received 0 Likes
on
0 Posts
Re: Big favor all, with 1.8l or 2.0l turbo charged motors please post dyno #'s (Boostfed)
Daym... I feel like a chump in this crowd... I haven't been back to the dyno to pull out some timing... still @ 1.5 deg per #
[Modified by hybridsol, 11:35 PM 3/20/2003]
[Modified by hybridsol, 11:35 PM 3/20/2003]
#20
Re: Big favor all, with 1.8l or 2.0l turbo charged motors please post dyno #'s (shortyz)
Boostfed nice numbers.. wow
#21
Join Date: Mar 2002
Location: southern california, usa
Posts: 3,160
Likes: 0
Received 0 Likes
on
0 Posts
Re: Big favor all, with 1.8l or 2.0l turbo charged motors please post dyno #'s (Boostfed)
yes yes, it's low. blablabla. put your cat on and see how much power you put out [IMG]
[Modified by Ruckus138, 1:17 AM 3/21/2003]
#22
Re: Big favor all, with 1.8l or 2.0l turbo charged motors please post dyno #'s (Ruckus138)
yes yes, it's low. blablabla. put your cat on and see how much power you put out [IMG]
[Modified by Ruckus138, 1:17 AM 3/21/2003]
[Modified by Andrew 825SM, 2:03 AM 3/21/2003]
#23
Honda-Tech Member
Join Date: May 2002
Location: California
Posts: 3,047
Likes: 0
Received 0 Likes
on
0 Posts
Re: Big favor all, with 1.8l or 2.0l turbo charged motors please post dyno #'s (Andrew 825SM)
For some reason it seems like the dyno at Import Builders puts out lower horsepower/torque numbers.
Stock b18b
Drag III w/t04b turbo
10psi
Stock Cat
2.5" catback
Hondata
440's
220hp/193tq
My run @ importbuilders
stock b16a
JRSC 10psi
2.5" Header back, no Cat
AEM CAI
Hondata
440's
220hp/153tq
#25
Re: Big favor all, with 1.8l or 2.0l turbo charged motors please post dyno #'s (ekb18c)
old set-up now with a friend
344whp at 8000rpm, forget the torque
330whp at 6200rpm on the graph
84.5mm ls block 9:5:1
850cc injectors, haltech e6k
ts04, 60-1
12psi on pump gas with a very, very conservative tune
old 1.8l set-up made 450whp at 18psi on 116octane
344whp at 8000rpm, forget the torque
330whp at 6200rpm on the graph
84.5mm ls block 9:5:1
850cc injectors, haltech e6k
ts04, 60-1
12psi on pump gas with a very, very conservative tune
old 1.8l set-up made 450whp at 18psi on 116octane