Racimex oil cooler install.
#2
Honda-Tech Member
Join Date: Jan 2000
Location: Eastern Coast Rocks, NY, USA
Posts: 826
Likes: 0
Received 0 Likes
on
0 Posts
Re: Racimex oil cooler install. (pinota)
Eu gosto de sua instalação do cooler de óleo muito. Trabalho excelente.
Desculpe meu português da conversa do bebê. Eu fui ensinado falar quando eu era um menino novo por minha avó.
Eu estou tentando aprender outra vez porque meu cliente é Banco Comercial Portugues em New York City
[Modified by Christian, 10:34 AM 3/15/2003]
Desculpe meu português da conversa do bebê. Eu fui ensinado falar quando eu era um menino novo por minha avó.
Eu estou tentando aprender outra vez porque meu cliente é Banco Comercial Portugues em New York City
[Modified by Christian, 10:34 AM 3/15/2003]
#4
Thread Starter
Join Date: Feb 2002
Location: Lisbon, Portugal
Posts: 594
Likes: 0
Received 0 Likes
on
0 Posts
Re: Racimex oil cooler install. (Christian)
Eu gosto de sua instalação do cooler de óleo muito. Trabalho excelente.
Desculpe meu português da conversa do bebê. Eu fui ensinado falar quando eu era um menino novo por minha avó.
Eu estou tentando aprender outra vez porque meu cliente é Banco Comercial Portugues em New York City
Desculpe meu português da conversa do bebê. Eu fui ensinado falar quando eu era um menino novo por minha avó.
Eu estou tentando aprender outra vez porque meu cliente é Banco Comercial Portugues em New York City
hey, that´s my and my wife bank here in Portugal.
Pinota
Trending Topics
#8
Thread Starter
Join Date: Feb 2002
Location: Lisbon, Portugal
Posts: 594
Likes: 0
Received 0 Likes
on
0 Posts
Re: Racimex oil cooler install. (Tweakmeister)
I don´t have a oil pressure gauge.
About oil temps, before the oil cooler during hard drive 320 ºF, after oil cooler install never went up than 255-260 ºF.
After install i´ve notice only 0.6 quart of oil to be ok. Not bad.
About oil temps, before the oil cooler during hard drive 320 ºF, after oil cooler install never went up than 255-260 ºF.
After install i´ve notice only 0.6 quart of oil to be ok. Not bad.
#9
Member
Join Date: Dec 2000
Location: official euro R hospital, AUSTRIA
Posts: 4,567
Likes: 0
Received 0 Likes
on
0 Posts
Re: Racimex oil cooler install. (pinota)
Oh man, that is not possible 320 F = 160 C!!!!!!
165 - 185 Farenheit (75-85 C) is good
[Modified by austrian type-R, 8:34 PM 3/15/2003]
165 - 185 Farenheit (75-85 C) is good
[Modified by austrian type-R, 8:34 PM 3/15/2003]
#10
Thread Starter
Join Date: Feb 2002
Location: Lisbon, Portugal
Posts: 594
Likes: 0
Received 0 Likes
on
0 Posts
Re: Racimex oil cooler install. (austrian type-R)
Oh man, that is not possible 320 F = 160 C!!!!!!
165 - 185 Farenheit (75-85 C) is good
[Modified by austrian type-R, 8:34 PM 3/15/2003]
165 - 185 Farenheit (75-85 C) is good
[Modified by austrian type-R, 8:34 PM 3/15/2003]
This is right. 160 ºC during very hard drive, it´s not dificult. With the oil cooler during very hard drive never went up than 120º -125º C
#11
Member
Join Date: Dec 2000
Location: official euro R hospital, AUSTRIA
Posts: 4,567
Likes: 0
Received 0 Likes
on
0 Posts
Re: Racimex oil cooler install. (pinota)
oh my god. That is just insane! Is'nt that temp way to high? My gauge shows only 95 Degree C when I drive hard on the Autobahn. Your pistons get cooled with the oil too, is the oil temp realy that high on stock ITRs? What oil do you use? I run 10W60 Castrol RS
[Modified by austrian type-R, 8:44 PM 3/15/2003]
[Modified by austrian type-R, 8:44 PM 3/15/2003]
#13
Junior Member
Join Date: Apr 2001
Location: Salerno - Italy
Posts: 239
Likes: 0
Received 0 Likes
on
0 Posts
Re: Racimex oil cooler install. (ITR1858)
I have oil temperature gauge too.
With stock exaust on hot summer (30-35 C°) after 10 minutes of high rev driving (constantly over 7500 rpm) oil temperatures raise to 145 C° max .
After switched to Mugen i/h/e ecu tuned with cam gears, in the same wheater and driving conditions, oil temperature is about 125-130 C°.
With stock exaust on hot summer (30-35 C°) after 10 minutes of high rev driving (constantly over 7500 rpm) oil temperatures raise to 145 C° max .
After switched to Mugen i/h/e ecu tuned with cam gears, in the same wheater and driving conditions, oil temperature is about 125-130 C°.
#14
Member
Join Date: Dec 2000
Location: official euro R hospital, AUSTRIA
Posts: 4,567
Likes: 0
Received 0 Likes
on
0 Posts
Re: Racimex oil cooler install. (ITR1858)
160° C is easily possible
[Modified by austrian type-R, 2:10 PM 3/16/2003]
#15
Honda-Tech Member
Join Date: Mar 2001
Location: Weed Country, Holland, Netherlands
Posts: 3,468
Likes: 0
Received 0 Likes
on
0 Posts
Re: Racimex oil cooler install. (austrian type-R)
160 deg. C is too high indeed. You should keep the oil temp. below 140 C to be safe and use Castrol RS 10W-60 at the track.
With an oil cooler it should be able to remain below 120 deg C.
With an oil cooler it should be able to remain below 120 deg C.
#18
Honda-Tech Member
Join Date: Sep 2001
Location: German Ambassador, Hessen
Posts: 2,068
Likes: 0
Received 0 Likes
on
0 Posts
Re: Racimex oil cooler install. (austrian type-R)
uhm well, not in my case. 10w60 here!
The thing with 60 oil is a normal physic:
The oilfilm between the parts is more thick... Within this film there are small metal-particles that rub each other ==> That produces energy which leaves as heat. Normal thing. But 60 oil can handle the heat, no problem here.
0W40 can be dangerous in case of beeing burnt very quick.
I did lots of research in these things because I had my old engine running with a lot of problems I tried to solve... Glad to run a strong JDM-OEM stockie again.
10W60+oil cooler gets my vote
#19
Thread Starter
Join Date: Feb 2002
Location: Lisbon, Portugal
Posts: 594
Likes: 0
Received 0 Likes
on
0 Posts
Re: Racimex oil cooler install. (ITR1858)
I prefer Shell Helix Ultra 5W-40. I doesn´t rip off so fast.
Castrol 10W-60 made my ITR burn more oil and run more hot.
Castrol 10W-60 made my ITR burn more oil and run more hot.
#20
Member
Join Date: Dec 2000
Location: official euro R hospital, AUSTRIA
Posts: 4,567
Likes: 0
Received 0 Likes
on
0 Posts
Re: Racimex oil cooler install. (ITR1858)
The thing with 60 oil is a normal physic:
The oilfilm between the parts is more thick... Within this film there are small metal-particles that rub each other ==> That produces energy which leaves as heat. Normal thing. But 60 oil can handle the heat, no problem here.
Also IF 10w60 can handle that heat..........you have lil power loss from that much heat, cause like Pinota mentioned, the ECU will retard timing, cause it gets to hot in the combustion camber since the pistons are not cooled that much from the oil spray. I would say you better install an oil coller ASAP before you hit the track again......
#21
Honda-Tech Member
Join Date: Sep 2001
Location: German Ambassador, Hessen
Posts: 2,068
Likes: 0
Received 0 Likes
on
0 Posts
Re: Racimex oil cooler install. (austrian type-R)
no worry...
I run RAN to hot with my old engine...
This one gets a 19row oilcooler when the final mods are done...cage, seats and harness, shorter gears... and finally oilcooler.
I run RAN to hot with my old engine...
This one gets a 19row oilcooler when the final mods are done...cage, seats and harness, shorter gears... and finally oilcooler.
#22
Thread Starter
Join Date: Feb 2002
Location: Lisbon, Portugal
Posts: 594
Likes: 0
Received 0 Likes
on
0 Posts
Re: Racimex oil cooler install. (ITR1858)
Mine is a 10 row cooler. The best for 1800-2000 cc. engines.
Remember a scoobye uses a 10 row oil cooler and it´s turbo.
Remember a scoobye uses a 10 row oil cooler and it´s turbo.
#23
Honda-Tech Member
Join Date: Feb 2002
Location: Southern California
Posts: 4,746
Likes: 0
Received 0 Likes
on
0 Posts
Re: Racimex oil cooler install. (Christian)
Eu gosto de sua instalação do cooler de óleo muito. Trabalho excelente.
Desculpe meu português da conversa do bebê. Eu fui ensinado falar quando eu era um menino novo por minha avó.
Eu estou tentando aprender outra vez porque meu cliente é Banco Comercial Portugues em New York City
[Modified by Christian, 10:34 AM 3/15/2003]
Desculpe meu português da conversa do bebê. Eu fui ensinado falar quando eu era um menino novo por minha avó.
Eu estou tentando aprender outra vez porque meu cliente é Banco Comercial Portugues em New York City
[Modified by Christian, 10:34 AM 3/15/2003]