How do you install the Greddy Black Box??
#1
Thread Starter
Join Date: Nov 2001
Location: Bay Area, CA
Posts: 332
Likes: 0
Received 0 Likes
on
0 Posts
How do you install the Greddy Black Box??
I believe I'm ready and apt enough to install my Greddy turbo kit on my sohc Civic. Many of you suggested that I should just do it myself since its a simple bolt on kit. I've completely read over turbocivic.net and the install was for the newer Greddy kits that come with a blue box. I've also done a search with no luck... I just want to make sure I can do the wiring my self as well... Thanks!
#2
Member
Join Date: Feb 2002
Location: Lat Long 32.90 97.03
Posts: 1,144
Likes: 0
Received 0 Likes
on
0 Posts
Re: How do you install the Greddy Black Box?? (Maverick77)
This is the best i could find
Here you go:
http://tonrog.homestead.com/files/blackboxwiring.jpg
hope this helps.
-deepsi
Here you go:
http://tonrog.homestead.com/files/blackboxwiring.jpg
hope this helps.
-deepsi
#3
Thread Starter
Join Date: Nov 2001
Location: Bay Area, CA
Posts: 332
Likes: 0
Received 0 Likes
on
0 Posts
Re: How do you install the Greddy Black Box?? (DeepSi)
I appreciate it man
But where exactly do you connect the blue, black, red, green, and white wires? Sorry if its a dumb question.
But where exactly do you connect the blue, black, red, green, and white wires? Sorry if its a dumb question.
#5
Member
Join Date: Feb 2002
Location: Lat Long 32.90 97.03
Posts: 1,144
Likes: 0
Received 0 Likes
on
0 Posts
Re: How do you install the Greddy Black Box?? (Maverick77)
i found this...
https://honda-tech.com/zerothread?id=266571
you can IM, turbo sol if you have questions
taken from https://honda-tech.com/zerothread?id=216944
it looks like one wire is spliced into the ecu, and the other four wires go into the engine compartment, and splice into the IAT and the coolant sensor. just use some shrink tubing, and solder and it should work out. http://tonrog.homestead.com/files/blackboxwiring.jpg
hope this helps you out.
-deepsi
https://honda-tech.com/zerothread?id=266571
you can IM, turbo sol if you have questions
there is one wire that runs into the ecu. the others are on the iat (intake air temperature sensor), map sensor, and the coolant sensor.
it looks like one wire is spliced into the ecu, and the other four wires go into the engine compartment, and splice into the IAT and the coolant sensor. just use some shrink tubing, and solder and it should work out. http://tonrog.homestead.com/files/blackboxwiring.jpg
hope this helps you out.
-deepsi
Thread
Thread Starter
Forum
Replies
Last Post
r1lorenzini
Forced Induction
4
02-13-2004 01:45 PM
xlr8
Forced Induction
2
06-21-2003 07:02 AM