Clayton

iTrader: (1)

Please read the rules for the new thread. At the end of each month this thread will be unstickied, and a new thread created in this one's place. If you haven't sold your parts, you may post them in the new month's thread. DO NOT BUMP THE OLD THREAD
1) This is for Race Car parts ONLY. No body panels, fenders etc allowed, unless it is a full race front end. NO useless OEM parts!
2) Do NOT repost your thread over and over hoping to get it on a new page. If your parts sell please remove them from your post. If you sell everything off of your list of parts, report your post to moderator by clicking on the just under your user name and I will delete it.
3) you are ONLY allowed ONE post in this thread. If you are found to have more than 1 post, all your posts in the FS sticky will be deleted

4) NO WTB ADS!

5) NO COMMERCIAL POSTS AT ALL THIS MEANS, IF YOU OWN A SHOP DO NOT POST BRAND NEW PARTS IN HERE

We will delete any BS we feel does not belong in here

0Innes

iTrader: (3)

FS: -- Motec M4 ECU (just the box, no wiring harness) but will include the Datalogging cable and Plug so if you want to make your own custom harness you can.

This is the M4 ECU with the Advanced Functions and Lambda already unlocked (only 2 options available for the M4). This was purchased from Motec USA back in 2004 so it is supported by Motec USA

we have used this M4 over the past 3 years on my race car with great success, just selling it because we have recently upgraded to another Motec box.

Retail on the M4 with the options unlocked is $3009

asking $1800 for it. (remember, this box has the $1k worth of options unlocked already)

you can get the Honda Plug and Play Harness from T1RaceParts.com if you plan on installing this into a Honda

I also have an OEM Honda Distributor with the Motec plug installed into it that is required to run the ECU if available if you are running on an OEM Distributor still

this M4 also has a pretty bad *** map loaded in it that you can work with if you like to get you ahead of the game (2.0L GSR Turbo, 1600cc injectors)

Email -- James@IPGParts.com
or call - 407-324-4684

MARC P

Selling my almost new Black Lenso Fronts 13x7 with 24.5x9x13MT
600.00

Rears 15x3.5 with 24.5 MH
600.00


Package Deal 1100.00


Fronts have about 25 Passes on them so there is still plenty of life left, rears maybe 20.

Everything is plus shipping





Marc P

TommyC83

Precision GT4067R with garret divided 1.06a/r hotside $800 shipped....

regamaster

AEM EMS for 2002-2004 K Series

30.1030U Comes in the box with everything.
Only used on engine dyno for 2 hours.

$1400.00 shipped.

Arias Pistons NEW for K Series:
6cc domes
.708 pin
Comes with rings, pins and locks
$700.00 Shipped

K-Series Aviaid Stage 3 Dry Sump (just rebuilt)
Billet Fab Dry Sump Pan
Mount
Drive pullies
$1500.00 shipped

K-Series Type S Race Head (No Rocker Arms)
Ported by HRD
Skunk 2 valves, Springs, Retainers
Have flow numbers verified by Portflow.
$3000.00 Shipped

0BoostedJeff

4" Aluminum Exhaust for EG Hatchback. Made here at Tempest Racing. Goes under gas tank, Vband Connection at the Downpipe. $400.00

solorexer

AEM EMS http://www.hondamarketplace.co...34236

AEM Twin Fire http://www.hondamarketplace.co...34240

ctr-ek

wussup i have a BRAND NEW Aeromotive A-1000 pump that i dont have any use for anymore, im asking 250shipped. Its a pretty good deal considering they go for 330+shipping

you can reach me at 201-993-0630








Modified by ctr-ek at 12:07 PM 7/1/2008

sportfwddc2

PM me and i will send pics ASAP make offers buyer pay shipping and paypal fees
B series BDL 70mm throttle body $150
Prologger 3 bar map sensor brand new still in package $75 obo
98 GSR gauge cluster 76794 miles on odometer make offer
k20a2 type s 6 speed transmission no grinds less than 10,000 orginal miles no grinds curcuit worx spool installed, great shape $1200 obo

MrParks

Fluid Control Solutions
Stainless Steel braided Teflon covered brake lines w/ vinyl dipped coating for abrasion and long life. this is a complete kit, front and rear, bolts, locator's clips and or bolts, and crush washers.

applications i have for sale:
88-91 civic/integra 92-01 civic/integra
06+ Mitsubishi evo 8,9, and 10
Subaru wrx impreza, and sti models 05+.

one of each app.
first come first serve. thanks for looking!

all kits comes with all the necessary hardware bolts and washers for a easy and clean install. dont short side your brake system!!!

all kits are D.O.T approved for quality and insurance that you have a great product that has been tested way beyond the limits of what we put them through on the street and track .

100 shipped obo.



just added :

fluid control solutions
turbo oil / evacuation line kit
comes with everything you need.

also have one in stainless steel/ and clear cover for the feed line as well.



clutch line lit for k series swap complete with all the hardware and locator's clips.



vtec line kit for ls hybrids.



2 rolls of this heat insulation wrap as well



lastly i have the killer 1,000,000 hp fuel system set up make offer






Modified by MrParks at 9:35 PM 7/1/2008


Modified by MrParks at 9:40 PM 7/1/2008

AcuraIntegraLS-T

I have a GSR tranny with oem lsd. In great shape comes with vss and reverse sensor. Ran perfect when it was pulled. Interested in trading for a full fuel setup for 600+ hp or for cash make offer.

Axle

I am selling all of my stuff. Prices are negotiable. Willing to trade, let me know what you have.

(1) Borg-Warner S378 turbo *never used

(2) 15x9 Welds 5x100 bolt pattern w/28" tires *~5 passes on them- $775




1600cc fuel injectors *never used - $350


Powertrain Control Solutions Dashlogger - $750


Hallman manual boost controller - $60


Shipping not included. Some assembly required.


Modified by Axle at 10:25 PM 7/1/2008

Autoworks

F.S H22 T3 Manifold and Downpipe.
The downpipe is flanged for a V band housing turbo, 3" and heat wrapped.
asking $650 for the setup together shipped. The downpipe will come heat wrapped as it is in the pics

Greg
GO-AUTOWORKS.COM

Feel free to call, pm or email any questions

NAH2B

fs: used PRODRIVE h series spool $100 plus shipping

pm me if interested, thanks

building boost

fs:
fluidyne radiator w/ 12" slim fan. $200.
15ft -10 bnib stainless steel braided line. $80
3 black summit -10 90degree hose end. $15 each
1 black summit -10 45degree hose end. $15



Modified by building boost at 12:07 AM 7/17/2008

vtekthis

FS-Tilton twin Ceramettalic clutch-one disc is pretty beat, runs fine, but needs new disk-700.00

garrett GT4294R-black comp housing/115 hot side. 1000.00

AEM boost solenoid. used for half season 100.00

toons of stock trans parts-what you need?




Modified by vtekthis at 10:38 AM 7/2/2008

sicsixone

want to sell my sfwd 1999 integra gsr.the car has a custom 12 point chromoly cage that is tig welded.the cage goes thrue the fire wall and ties into the shock tower.it was constucted of 1 5/8"this is a very strong cage and well built.it comes with a custom stock gas tank that is sumped with
-08 fitting.the gas tank was cut in half and a plate welded in between.then pressure tested at a local radiator shop.comes with stock suspension.i will throw in the gages and the momo seat.the sunroof has been modified will some aluminum brackets that hold the glass in place there is no track for the sunroof.the dash has been completly gutted.the car does come with complete interior minus carpet.the body is in excelent shape.it does not come with fuel pumpor fuel filter.i am willing to deliver up to 100 miles.if you would like more pics let me know.i have tons of them.asking $2500.00 obo must see to appreciate.does not come with bogarts.






for sale waterman cam drive fuel pump sprint 500 brand new w/pressure valve
$600.00 obo

for sale is a brand new stage 1 prodrive/circuitworx setup.the spool was installed but never used comes with speedo drive.the hubs have new bearings.$1400.00 firm


for sale is a set of swayaway threaded coilover shocks.they are nitrogen filled comes with 1000 lb springs on rears and 350 lb on front.SOLD

new phantom grip hand cuff pn pgtmc $150.00
1 new rc 1600cc injector 50.00
1 slightly used rc 1600cc injector 35.00
please email me at crxbyjon@hotmail.com
or call 1 818 974 4352 jon

Modified by sicsixone at 9:35 PM 7/1/2008


Modified by sicsixone at 9:36 PM 7/1/2008


Modified by sicsixone at 9:38 PM 7/1/2008


Modified by sicsixone at 2:02 PM 7/12/2008

E Town DSM

MSD Digital 7 Programmable(MSD#75314) Traction Control, Multi stage retards and rev limiters. Tons of feature. New was used for a harness mock up never powered up or programmed just mounted. Complete with all harnesses mounting hardware, and software. New 900

Asking 650 Shipped
Pics Upon Request

FastechWrx

I have a set of Manley Valves for H22 used.

Need to get rid of these asap.....







I am looking to get $200 plus shipping

thanks

2 0 3

Sparco Speed in great condition! (small hole drilled through back of seat for cage mount, very clean install, you cant even tell the hole is there)
Seat mount / Slider is currentlyn attached. Will sell w or w/o slider.
$275 w/ slider (check link in sig for pics)


Bogart Fly stars 4x100 15x9 4.5" backspacing BRAND NEW! Never ran these wheels, mounted some DOT MH's and mounted on the car, but never made a pass with them. One wheel slightly damaged on the inside from when we mounted it with out a spacer and brake calipers scrapped inside Other wheel is brand new mint condition. Paid 660 direct from Bogart less than a month ago. NO TIRES! Will leave tires on if wanted for extra $
$500




M&H DOT cheater slicks 26x10.5 Brand new! Only mounted on wheels, and driven in/out of the trailer. No passes or burnouts ever made on them. Still see John's "Good Luck" writing.
$275




Aeromotive fuel sample valve
works perfect
$60


Moroso poly/sealed NHRA approved Battery Box
$75


Skunk2 Short shifter and Shift **** combo
mint condition, slightly used
$100


1.05 T4 divided back housing from our 4088R
used for 4 passes, will have a fresh sandblast done before shipping
$ Best offer


Mr. Gasket 10" Electric Fan
Used for 1 dyno session and 1 race, cooled engine down a bit more than the spal
s-blade we had on it last year. I really like this fan! Dont have any pics yet, here is a link to it on jegs http://www.jegs.com/p/Mr.+Gask...10117
$50

-3 Oild feed line, and -10 oil return line for GT T4 turbos
return is lengthy for a top mount, comes with T4 return flange, heat sheild wrap, AN fittings and line, and 1/8" BSP to 1/8" NPT for feed line.
$50


Modified by 2 0 3 at 7:46 AM 7/3/2008


Modified by 2 0 3 at 10:09 AM 7/10/2008


Modified by 2 0 3 at 8:55 AM 7/16/2008

alexsracing

Sidewinder Turbo Manifold with mulitple options on it

description

price 450 OBO
Sidewinder Turbo Manifold no cracks great construction heavy duty gauge
for a honda-acura b-series motor.
has a high temp coating
will fit t3 and t4 turbines
will fit tial 38mm wastegate or I forgot the size but the gate that fits the square is almost 500 bucks. So converted it for a 38mm tial.

before the heat wrap and tial 38mm wastegate option added




on a 92-95 civic with b-series swap





and how it is now uninstalled after heat wrap.

LERRY

Function 7 turbo oil return line w/ fittings - $70obo

JamaicanDave

$3k
Lite Drag Setup b-series:
stock GSR,victorX manifold, prodrive spool, 4.7 ratio, side exit header

kazino42

SOLD


Modified by kazino42 at 5:31 PM 7/3/2008

OMG B16

Up for grabs:

VictorX Intake Manifold B16/ITR Head(needs some cleaning) - PENDING
OBD2 B-series Alternator with AEM Blue Pulley - 75$
H4 HID's 6K, forgot the brand - SOLD
Precision 1000cc injectors - SOLD
Professional Products 68mm TB Polished - 100$
Dual Cluster gauge pod for 96-00 civic. SOLD


Precision T3/T67 P-trim(H.O.)
I purchased this turbo two months ago from Terry @ Boostfed Racing.
E-cover 3" inlet .60 a/r
5-bolt exhaust side - 63 a/r

I put just under 1000 Miles on it. This is the biggest turbo i was able to fit with my set-up (InlinePRO manifold with a/c, ect..)

Selling for 700 OBO$! Basically brand new!


OS Giken Twin Disc SOLD


Shipping is extra for everything.




Modified by OMG B16 at 4:59 PM 7/13/2008