FS: Fully built turbo b18c1 honda part out
12-07-2007, 06:22 PM
#1
Junior Member
Thread Starter
Join Date: Mar 2005
Location: Buffalo, NY, 14207
Posts: 116
Likes: 0
Received 0 Likes
on
0 Posts
FS: Fully built turbo b18c1 honda part out
Update: new price 
This is all i have left
Head: 578 miles on it
96 b18c gsr head
SuperTech SS valves
dual springs
ti retainers
hot tank
3 angle valve job
surface
new seals
$950
Fuel:
aeromotive a1000 fuel pump sold
aeromotive fuel controller sold
Fuel lab regulator <--$100
96 ls stock intake bare <--$15
resurfaced oem flywheel. excellent cond. <---$50
gm 3bar map sensor <--$60
ecu: <-----$110 shipped
p75 ls ecu
vtec added
crome
everything is obo
I'll finish updating this tomorrow.
THanks for looking
JoJo
Modified by Estorvito at 8:06 AM 12/17/2007
Modified by Estorvito at 11:59 AM 12/19/2007
Modified by Estorvito at 6:52 PM 12/19/2007
Modified by Estorvito at 8:18 PM 12/26/2007
This is all i have left
Head: 578 miles on it
96 b18c gsr head
SuperTech SS valves
dual springs
ti retainers
hot tank
3 angle valve job
surface
new seals
$950
Fuel:
aeromotive a1000 fuel pump sold
aeromotive fuel controller sold
Fuel lab regulator <--$100
96 ls stock intake bare <--$15
resurfaced oem flywheel. excellent cond. <---$50
gm 3bar map sensor <--$60
ecu: <-----$110 shipped
p75 ls ecu
vtec added
crome
everything is obo
I'll finish updating this tomorrow.
THanks for looking
JoJo
Modified by Estorvito at 8:06 AM 12/17/2007
Modified by Estorvito at 11:59 AM 12/19/2007
Modified by Estorvito at 6:52 PM 12/19/2007
Modified by Estorvito at 8:18 PM 12/26/2007
12-08-2007, 01:50 AM
#3
Honda-Tech Member
Join Date: Jun 2004
Location: Bay Area, California
Posts: 3,169
Likes: 0
Received 0 Likes
on
0 Posts
Re: FS: Fully built turbo b18c1 honda part out (TheThiefTheKnife'NTheGun)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by TheThiefTheKnife’NTheGun »</TD></TR><TR><TD CLASS="quote">How much for the block</TD></TR></TABLE>
12-08-2007, 08:45 AM
#4
Junior Member
Thread Starter
Join Date: Mar 2005
Location: Buffalo, NY, 14207
Posts: 116
Likes: 0
Received 0 Likes
on
0 Posts
The car ran 11.3 1/4 and 7.3 1/8 @ 102mph with shitty 2.0 60ft spinning 1st 2nd 3rd in Toronto motorsports in Cayuga ON.
$8000 takes it all.
Modified by Estorvito at 9:56 AM 12/8/2007
$8000 takes it all.
Modified by Estorvito at 9:56 AM 12/8/2007
12-09-2007, 08:53 AM
#6
Junior Member
Thread Starter
Join Date: Mar 2005
Location: Buffalo, NY, 14207
Posts: 116
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Estorvito)
I'll be in the garage all day pulling parts out.
If you have any questions or need anything call my cell @
716-207-7077
No private calls please
JoJo
If you have any questions or need anything call my cell @
716-207-7077
No private calls please
JoJo
Trending Topics
12-09-2007, 03:03 PM
#9
Junior Member
Thread Starter
Join Date: Mar 2005
Location: Buffalo, NY, 14207
Posts: 116
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Estorvito)
sold the following:
motor mounts
egt gauge
cam gears
plug wires
slim fan
timing belt
lenso wheels/slicks
aem fuel rail
boost gauge
throttle body
inn tune battery setup
motor mounts
egt gauge
cam gears
plug wires
slim fan
timing belt
lenso wheels/slicks
aem fuel rail
boost gauge
throttle body
inn tune battery setup
12-10-2007, 05:35 PM
#16
Honda-Tech Member
iTrader: (1)
Join Date: Jun 2006
Location: 860, U.S.A
Posts: 296
Likes: 0
Received 0 Likes
on
0 Posts
Re: (boots89)
Block:
B18c 94 gsr block Benson sleeved
cp pistons 81mm
pauter rods
new honda water and oil pump
greddy timing belt <---sold
new under thingy tray? lol
new oem crank micropolished/balanced
acl bearings
oem tapped oil pan -10an
new oil pickup filter thingy HONDA
all new seals
How much for that block, pm me
B18c 94 gsr block Benson sleeved
cp pistons 81mm
pauter rods
new honda water and oil pump
greddy timing belt <---sold
new under thingy tray? lol
new oem crank micropolished/balanced
acl bearings
oem tapped oil pan -10an
new oil pickup filter thingy HONDA
all new seals
How much for that block, pm me
12-11-2007, 08:43 AM
#18
Junior Member
Thread Starter
Join Date: Mar 2005
Location: Buffalo, NY, 14207
Posts: 116
Likes: 0
Received 0 Likes
on
0 Posts
some stuff shipped this morning. Check pm's
Tranny is getting shipped as soon as money clears
torque mounts will be shipped shortly.
THank you guys
Tranny is getting shipped as soon as money clears
torque mounts will be shipped shortly.
THank you guys
12-11-2007, 11:47 AM
#20
Junior Member
Thread Starter
Join Date: Mar 2005
Location: Buffalo, NY, 14207
Posts: 116
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Estorvito)
Just got back from shipping more stuff
3 day air for "cool peeps" at no extra charge You'll only get 3day air if i like you.
Thanks Josh
JoJo
3 day air for "cool peeps" at no extra charge You'll only get 3day air if i like you.
Thanks Josh
JoJo
12-11-2007, 03:02 PM
#23
Junior Member
Thread Starter
Join Date: Mar 2005
Location: Buffalo, NY, 14207
Posts: 116
Likes: 0
Received 0 Likes
on
0 Posts
Re: (quis84)
Valve cover and tranny will be shipped first thing in the morning before i go to work. If not i can definetly have it shipped on my lunch break at noon.
You should have tracking number by 1pm.
Im shipping both items 3day air at no extra charge. 
You should have tracking number by 1pm.
Im shipping both items 3day air at no extra charge.
