1RMDave

Would would it take to put a jrsc for a d16 on a zc? Could I just cut the flange off the jrsc and weld on the zc flange? Its just so much cheaper/easier to find d series chargers forsale.

STREETWERKZ

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 1RMDave &raquo;</TD></TR><TR><TD CLASS="quote">Would would it take to put a jrsc for a d16 on a zc? Could I just cut the flange off the jrsc and weld on the zc flange? Its just so much cheaper/easier to find d series chargers forsale.</TD></TR></TABLE>


a SOHC ZC or a DOHC ZC?

if its a SOHC, it'll bolt right up. if its a DOHC, buy an adapter plate from http://www.ZCspeed.com

http://zcspeed.com/adapterpage.htm

SIred91

And there you have it.

Couldn't have said it better myself.

1RMDave

dohc, thanks for the link

STREETWERKZ

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 1RMDave &raquo;</TD></TR><TR><TD CLASS="quote">dohc, thanks for the link</TD></TR></TABLE>


no problem. good luck!


you may want to contact that company directly if you have any questions with the supercharger install using that adapter plate.

jlicrx

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by STREETWERKZ &raquo;</TD></TR><TR><TD CLASS="quote">


no problem. good luck!


you may want to contact that company directly if you have any questions with the supercharger install using that adapter plate. </TD></TR></TABLE>if you plan to buy a used JRSC to use with the ZCspeed adapter plate on a DOHC ZC, make sure you get the JRSC for the D16A6 and not the D16Z6, D16Y8, etc. - the supercharger itself from any of the kits will bolt right up, however, some of the other components like pulleys, alternator brackets, etc. are not the same - JRSC had different accessory kits for each of the models - if you really and truly know what you are doing, you can probably make the others work, but you may need to purchase (or fabricate) different components in order to get everything to match up - getting new components in itself may be a problem as Jackson Racing sold everything from their old supercharger design to Moss Motors Ltd. and it is my understanding that they are no longer selling new supercharger kits for the D-series engine - i don't know if they still have parts for them or not - you would have to check with Moss Motors

STREETWERKZ

i used a kit from a d16z6 on my d16a6 with no problems at all.

that whole 8atman thing with his install was a fluke because he purchased a broken kit and expected me to fix the problems mid-install. hehehehe

yes, you can still buy parts new from moss motors. its pretty easy too. just enter the part number in their website to see if its still available.

daveb91

I do believe without looking the Y8 has the offest manifold that will be a PITA to run on other d series because of the offset to get around MC.