b18 hatch mike

PRIME LOBE
CENTERLINE - 16.05 BTDC
INTAKE: Duration: 237.17 @ 0.060 INCHES Lift: 0.5583 INCHES
EXHAUST: Duration: 256 @ 0.050 INCHES Lift: 0.494 INCHES

will they work on stock b16a valve train

SkankyEJ7

14.1808 mm intake
12.5476 mm exhaust

so not no but hell naw would max out stock vavlesprings, like dont b16a vavlespring bind around 12.5 or something

DonF

Sure, those lift numbers are like Skunk Pro4's, BC stg.7's, Jun 5's and RM 28x's. Get good LMA's not used ones.

Rocket

SkankyEJ7

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DonF &raquo;</TD></TR><TR><TD CLASS="quote">Sure, those lift numbers are like Skunk Pro4's, BC stg.7's, Jun 5's and RM 28x's. Get good LMA's not used ones.</TD></TR></TABLE>

are you saying sure those cams will work with stock b16a valvetrain?

Rocket

Here are some "good" numbers for hot street. 260/255 duration @ 0.050" in/ex. 12mm max lift and 101/107 centres in/ex.

DonF

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SkankyEJ7 &raquo;</TD></TR><TR><TD CLASS="quote">

are you saying sure those cams will work with stock b16a valvetrain?</TD></TR></TABLE> Just as well as the above listed cams.

SkankyEJ7

oh i was about to say that stock b16a may not like 14.18mm of lift, and prolly wouldn't agree with 12.5mm on the exhaust side very long

b18 hatch mike

so i take that as a no they will not work and if no what about stock ctr cams

b18 hatch mike

bump