1996 Honda EK CIVIC B18B1 Swap (UTAH)
#1
Junior Member
Thread Starter
Join Date: Sep 2002
Location: Roy, UT, USA
Posts: 644
Likes: 0
Received 0 Likes
on
0 Posts
1996 Honda EK CIVIC B18B1 Swap (UTAH)
Vin Has been provided to mods.
This is a project Car. It has a 1996 B18B1 (Integra LS Motor). It has Sprint Lowering springs, 2.25 Exhaust w/ Resonator, GSR Exhaust Manifold, 02simulator.com Simulator, Random Tech CAT Converter.
The reason it is a project car is because it needs Body work and paint. It also was broken into so there is some wiring behind the dash that needs to be redone and cleaned up. It also needs the center Dash piece that holds the stereo and heater controls. It also needs 2 brackets to hold the Key switch as it just dangles right now. It also needs a Passenger side wheel hub, as the one in it squeaks. There are some here and there’s that it needs, timing adjustment, new battery. I have most parts to replace some body moldings and Side skirts, just needs clips; the bumper is not there as it was ripped off. The Drivers side window is off track and needs to be put back on (common problem on the body style).
That’s what I can think of right now.
Please E-mail back if you are SERIOUS. I am asking 1500 and fairly Firm on the price. It runs with a battery, yet it is unregistered. I would get a Car dolly to tow it.
No Money Orders. Verifiable funds ONLY.
I am in Roy.
E-mail address is qwst_ckawa@msn.com. Or you can text me @ 8013095377. I am not always able to answer the phone.
Modified by B18C1 '96 Coupe at 9:43 AM 8/18/2007
This is a project Car. It has a 1996 B18B1 (Integra LS Motor). It has Sprint Lowering springs, 2.25 Exhaust w/ Resonator, GSR Exhaust Manifold, 02simulator.com Simulator, Random Tech CAT Converter.
The reason it is a project car is because it needs Body work and paint. It also was broken into so there is some wiring behind the dash that needs to be redone and cleaned up. It also needs the center Dash piece that holds the stereo and heater controls. It also needs 2 brackets to hold the Key switch as it just dangles right now. It also needs a Passenger side wheel hub, as the one in it squeaks. There are some here and there’s that it needs, timing adjustment, new battery. I have most parts to replace some body moldings and Side skirts, just needs clips; the bumper is not there as it was ripped off. The Drivers side window is off track and needs to be put back on (common problem on the body style).
That’s what I can think of right now.
Please E-mail back if you are SERIOUS. I am asking 1500 and fairly Firm on the price. It runs with a battery, yet it is unregistered. I would get a Car dolly to tow it.
No Money Orders. Verifiable funds ONLY.
I am in Roy.
E-mail address is qwst_ckawa@msn.com. Or you can text me @ 8013095377. I am not always able to answer the phone.
Modified by B18C1 '96 Coupe at 9:43 AM 8/18/2007
#2
Junior Member
Thread Starter
Join Date: Sep 2002
Location: Roy, UT, USA
Posts: 644
Likes: 0
Received 0 Likes
on
0 Posts
Re: 1996 Honda EK CIVIC B18B1 Swap (B18C1 '96 Coupe)
Here are a few pics, older but the car doesn't look different except a black passenger fender and a black front bumper (broken).
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
run for cover
Honda CRX / EF Civic (1988 - 1991)
4
06-21-2010 08:31 PM
gotnos2
Northwest (Sales)
0
09-08-2007 06:20 PM
Simple
Honda Civic / Del Sol (1992 - 2000)
14
10-29-2003 08:30 AM