Rattle after shifter bushing install at high rpms??
#1
Honda-Tech Member
Thread Starter
Join Date: Jan 2000
Location: Queen City, NC
Posts: 98
Likes: 0
Received 0 Likes
on
0 Posts
Rattle after shifter bushing install at high rpms??
I just had a new exedy clutch, es motor mount inserts and shifter bushing installed about three weeks ago. No problems til today. Under high rpm (>8k) the shifter rattles very loudly. I verified it does it in gear, in neutral, and in gear with clutch held down. You can feel the rattle in the gear shift. Any suggestions? Again only over 8k. Car has 38k miles.
Anybody else with this problem. It might not be the shifter bushings.
Thanks Josh
Anybody else with this problem. It might not be the shifter bushings.
Thanks Josh
#2
Join Date: Jan 2002
Location: Mississauga, Ontario, Canada
Posts: 118
Likes: 0
Received 0 Likes
on
0 Posts
Re: Rattle after shifter bushing install at high rpms?? (sxgt)
I had the same problem...take it to a shop..get them to tighten the busings...the rattle will go away, however your shifter will be heavier.
This usually occurs with polyurethane bushings...as they are stiffer.
This usually occurs with polyurethane bushings...as they are stiffer.
#4
Re: Rattle after shifter bushing install at high rpms?? (sxgt)
same problem here after installing es shifter bushings a few months ago. haven't had the time or motivation to get back under there to give the bolts an extra twist.
I assumed that was the problem, but now some are saying this is expected of poly bushings? if so, I'll be switching back to my stock rubbers, thank you.
I assumed that was the problem, but now some are saying this is expected of poly bushings? if so, I'll be switching back to my stock rubbers, thank you.
#5
Honda-Tech Member
Re: Rattle after shifter bushing install at high rpms?? (kkim)
Do the bushing bolts need to be torqued to a certain spec?
[Modified by hungsteR, 6:01 PM 10/3/2002]
[Modified by hungsteR, 6:01 PM 10/3/2002]
#6
Honda-Tech Member
Join Date: Apr 2001
Location: Land of Oz, KS
Posts: 2,339
Likes: 0
Received 0 Likes
on
0 Posts
Re: Rattle after shifter bushing install at high rpms?? (sxgt)
I had the exact same problem with ES shifter bushings, even with everything torqued correctly.
Switched to Mugen shifter bushings and the problem went away.
Switched to Mugen shifter bushings and the problem went away.
Trending Topics
#8
Honda-Tech Member
Re: Rattle after shifter bushing install at high rpms?? (Bob#455)
Switched to Mugen shifter bushings and the problem went away.
edit: I found out the Mugen bushings are $55 here.
[Modified by hungsteR, 6:08 PM 10/3/2002]
#9
Honda-Tech Member
Join Date: Apr 2001
Location: Land of Oz, KS
Posts: 2,339
Likes: 0
Received 0 Likes
on
0 Posts
Re: Rattle after shifter bushing install at high rpms?? (hungsteR)
How do the Mugen bushings feel compared to the stock/ES bushings? Also, with them being Mugen I can only guess how much they are...
#11
Honda-Tech Member
Join Date: Oct 2001
Location: Edgewater, MD / La Jolla, CA
Posts: 7,536
Likes: 0
Received 1 Like
on
1 Post
Re: Rattle after shifter bushing install at high rpms?? (hungsteR)
I retorqued everything (and gave it that extra special Tweak)...
I didn't have the problem on my '96 but on the '99 we'll see how she fairs tomorrow....
I'm thinking it's time to just write all the crap off and buy a C's adjustable setup
I didn't have the problem on my '96 but on the '99 we'll see how she fairs tomorrow....
I'm thinking it's time to just write all the crap off and buy a C's adjustable setup
Thread
Thread Starter
Forum
Replies
Last Post
scttydb411
Honda Civic / Del Sol (1992 - 2000)
8
02-12-2004 09:01 PM