How strong is an ITR crank? Crank gurus chime in...
#2
Honda-Tech Member
Join Date: Aug 2004
Location: Springfield, va, 22153
Posts: 82
Likes: 0
Received 0 Likes
on
0 Posts
Re: How strong is an ITR crank? Crank gurus chime in... (Circuit Star-29)
A factory B-series Honda crank will support 1000whp. They are some of the best made cranks you can run. I wouldn't run anything else.
#3
Honda-Tech Member
Thread Starter
Join Date: Feb 2003
Location: Searching...
Posts: 5,643
Likes: 0
Received 0 Likes
on
0 Posts
Re: How strong is an ITR crank? Crank gurus chime in... (Circuit Star-29)
Im glad it will support 1000hp...
But...I asked a very specific question...
Can an ITR crank withstand several hundred rpms of mashing the valves into a head?
But...I asked a very specific question...
Can an ITR crank withstand several hundred rpms of mashing the valves into a head?
#4
Honda-Tech Member
iTrader: (2)
Re: How strong is an ITR crank? Crank gurus chime in... (Circuit Star-29)
I would say yes, not that I have any proof or anything, but I know they are forged and I've seen several motors that have bent valves(including my roomates) and the cranks are untouched. The only time I've seen a crank go is either with a spun rod bearing, and then there was some other douche that spun his stock ITR motor to 10,500 and jammed the piston into the head.
*edit* I'm not a crank guru.
*edit* I'm not a crank guru.
#5
Re: How strong is an ITR crank? Crank gurus chime in... (clean rice)
you can always ship it to castillo's crank service or some other crank shop...
you might pay a little but personally i'd rather be safe than sorry..and they can micropolish it and all that other wonderful crank work stuff
you might pay a little but personally i'd rather be safe than sorry..and they can micropolish it and all that other wonderful crank work stuff
#7
Honda-Tech Member
Join Date: Mar 2002
Location: Southern California, U.S.A.
Posts: 9,854
Likes: 0
Received 4 Likes
on
4 Posts
Re: How strong is an ITR crank? Crank gurus chime in... (Circuit Star-29)
I had an engine catastrophe that involved dropped valves and chewed up pistons. The ITR crank was fine and is still making great power in my daily driver.
Trending Topics
#8
Honda-Tech Member
Thread Starter
Join Date: Feb 2003
Location: Searching...
Posts: 5,643
Likes: 0
Received 0 Likes
on
0 Posts
Re: How strong is an ITR crank? Crank gurus chime in... (b19coupe)
Outstanding...I hope that this crank is good too...
Thanks b19coupe...joo have one hell of engine.
Thanks b19coupe...joo have one hell of engine.
#9
Honda-Tech Member
Re: How strong is an ITR crank? Crank gurus chime in... (Circuit Star-29)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Circuit Star-29 »</TD></TR><TR><TD CLASS="quote">Can an ITR crank withstand several hundred rpms of mashing the valves into a head?</TD></TR></TABLE>
Generally, the weakest part is going to take the brunt of the blow. In this case, that would be the pistons.
Generally, the weakest part is going to take the brunt of the blow. In this case, that would be the pistons.
#10
Honda-Tech Member
Thread Starter
Join Date: Feb 2003
Location: Searching...
Posts: 5,643
Likes: 0
Received 0 Likes
on
0 Posts
Re: How strong is an ITR crank? Crank gurus chime in... (StorminMatt)
you would think so...never know however. Anyway. crank checked out...straight and no cracks...so thanks everyone for the replies.
Thread
Thread Starter
Forum
Replies
Last Post
Circuit Star-29
Drag Racing
6
02-22-2006 10:43 AM