Fan switch on d16y7 from d16a6
#1
Honda-Tech Member
Thread Starter
iTrader: (1)
Join Date: Dec 2004
Location: QC
Posts: 8,239
Likes: 0
Received 0 Likes
on
0 Posts
Fan switch on d16y7 from d16a6
did a search on this one already but i just wanna make sure coz i only found one thread
i had a d16y7 longblock swap on my civic wagon that got a d16a6 dpfi
my only problem is the fanswitch of the d16a6 is too big to fit on the d16y7 block
will the eng cooling temp sensor near the distibutor on the cylinder head work as a fan switch? coz it fits on the d16y7 block
i had a d16y7 longblock swap on my civic wagon that got a d16a6 dpfi
my only problem is the fanswitch of the d16a6 is too big to fit on the d16y7 block
will the eng cooling temp sensor near the distibutor on the cylinder head work as a fan switch? coz it fits on the d16y7 block
#2
Honda-Tech Member
Join Date: Apr 2003
Location: San Diego
Posts: 9,041
Likes: 0
Received 0 Likes
on
0 Posts
Re: Fan switch on d16y7 from d16a6 (marc-111)
nope u need to put a plug like the one on the iacv/iat its a 2 pin plug u need to adapt that to the 2 wires that go to the old style fan switch (2 pins inside the big black plastic cone looking thing) ur going to have to extend the wires...
the new temp fan switch will be on the thermostat housing right where all the grouns bolt up to...
and no the engine temp sensor will not turn on the fan...
the new temp fan switch will be on the thermostat housing right where all the grouns bolt up to...
and no the engine temp sensor will not turn on the fan...
#3
Honda-Tech Member
Thread Starter
iTrader: (1)
Join Date: Dec 2004
Location: QC
Posts: 8,239
Likes: 0
Received 0 Likes
on
0 Posts
Re: Fan switch on d16y7 from d16a6 (Nerologic)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Nerologic »</TD></TR><TR><TD CLASS="quote">nope u need to put a plug like the one on the iacv/iat its a 2 pin plug u need to adapt that to the 2 wires that go to the old style fan switch (2 pins inside the big black plastic cone looking thing) ur going to have to extend the wires...
</TD></TR></TABLE>
i dont get this? do you have like any pix or diagram?
am i still gonna use the old fan switch or cut it off and tap the wires to the iacv/iat?
Modified by marc-111 at 9:25 AM 2/6/2006
</TD></TR></TABLE>
i dont get this? do you have like any pix or diagram?
am i still gonna use the old fan switch or cut it off and tap the wires to the iacv/iat?
Modified by marc-111 at 9:25 AM 2/6/2006
#4
Honda-Tech Member
Join Date: Apr 2003
Location: San Diego
Posts: 9,041
Likes: 0
Received 0 Likes
on
0 Posts
Re: Fan switch on d16y7 from d16a6 (marc-111)
look at this pic...
u have to cut off the old 2 pin plugs from the old fan switch and adapt a 2 pin round plug like either of these...
PROPS TO RYWIRE for the dope pics like always...
#5
Honda-Tech Member
Thread Starter
iTrader: (1)
Join Date: Dec 2004
Location: QC
Posts: 8,239
Likes: 0
Received 0 Likes
on
0 Posts
Re: Fan switch on d16y7 from d16a6 (Nerologic)
oh i see but on my thermostat i used the old d16a6 thermostat cover that doesnt have that fan switch bung, i'll just replace it back again and look for a fanswitch and a plug
thanks!!!!
thanks!!!!
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
97civicdx
Honda Civic / Del Sol (1992 - 2000)
7
07-20-2010 05:04 AM