Where Should i Send My Head For PORTED n POLISH..
12-13-2005, 11:18 PM
#1
Thread Starter
Join Date: Aug 2005
Location: bRoNx, nY, USA
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
Where Should i Send My Head For PORTED n POLISH..
i need to get my head ported n polish do u know of a good place where i can send it or if anyone has one here already pnp that they want to sell it let me know thanx..
12-13-2005, 11:53 PM
#2
Junior Member
Join Date: Mar 2005
Posts: 982
Likes: 0
Received 0 Likes
on
0 Posts
Re: Where Should i Send My Head For PORTED n POLISH.. (Y me)
hmmmm lemme think about it for a second........... S-E-A-R-C-H!!!
try http://www.portflow.com or DPR
try http://www.portflow.com or DPR
12-14-2005, 05:51 AM
#7
Honda-Tech Member
Join Date: Mar 2001
Location: North East
Posts: 4,295
Likes: 0
Received 0 Likes
on
0 Posts
Re: Where Should i Send My Head For PORTED n POLISH.. (clean rice)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by clean rice »</TD></TR><TR><TD CLASS="quote"><FONT COLOR="blue"><FONT SIZE="20">RLZ </FONT></FONT>
Hondaraceengines.com
Honda-Tech screen name = MAX_CFM
/thread. </TD></TR></TABLE>
Works for me
Hondaraceengines.com
Honda-Tech screen name = MAX_CFM
/thread. </TD></TR></TABLE>
Works for me
Trending Topics
12-14-2005, 07:07 AM
#8
Honda-Tech Member
iTrader: (2)
Join Date: Mar 2002
Location: Woodbridge, NJ, Middlesex
Posts: 5,828
Likes: 0
Received 1 Like
on
1 Post
Re: Where Should i Send My Head For PORTED n POLISH.. (Y me)
Endyn, RLZ, Portflow ... they're all good, not sure about turnaround time, all of them have CNCs which helps turnaround time.
I told you just come by and grab my Portflow head, I just dont have your number to call you ...
I personally use Endyn because I see alotta CFMs in my head
[where's the flame torch from Dave and Don ... ***duck***] LOL
I told you just come by and grab my Portflow head, I just dont have your number to call you ...
I personally use Endyn because I see alotta CFMs in my head
[where's the flame torch from Dave and Don ... ***duck***] LOL
12-14-2005, 08:58 AM
#12
Kill Gil
Re: (hu)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by hu »</TD></TR><TR><TD CLASS="quote">RLZ if you are looking for a lot of power.</TD></TR></TABLE>
really? you guys prefer RLZ over Portflow or Alaniz weird. Any particular reasons?
BTW- Ive never personally dealt with RLZ but the common rule of thumb for all the guys here at Cali is go with portflow for good work with a quick turn around time, but if you have some time to kill send it to Alaniz for a little bit better port.
really? you guys prefer RLZ over Portflow or Alaniz weird. Any particular reasons?
BTW- Ive never personally dealt with RLZ but the common rule of thumb for all the guys here at Cali is go with portflow for good work with a quick turn around time, but if you have some time to kill send it to Alaniz for a little bit better port.
12-14-2005, 09:00 AM
#13
Junior Member
Join Date: Feb 2004
Location: Virginia, VA
Posts: 674
Likes: 0
Received 0 Likes
on
0 Posts
Re: Where Should i Send My Head For PORTED n POLISH.. (clean rice)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by clean rice »</TD></TR><TR><TD CLASS="quote"><FONT COLOR="blue"><FONT SIZE="20">RLZ </FONT></FONT>
Hondaraceengines.com
Honda-Tech screen name = MAX_CFM
/thread. </TD></TR></TABLE>
excellent job and great customer service. couldn't be happier with my numbers
Dave
Hondaraceengines.com
Honda-Tech screen name = MAX_CFM
/thread. </TD></TR></TABLE>
excellent job and great customer service. couldn't be happier with my numbers
Dave
12-14-2005, 04:32 PM
#15
Honda-Tech Member
Join Date: Jan 2005
Location: CA
Posts: 598
Likes: 0
Received 0 Likes
on
0 Posts
Re: (GUILOTINE)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by GUILOTINE »</TD></TR><TR><TD CLASS="quote">
but the common rule of thumb for all the guys here at Cali is go with portflow for good work with a quick turn around time, but if you have some time to kill send it to Alaniz for a little bit better port.</TD></TR></TABLE>
works for me! alaniz did a great job on my head, & only took about a week.
http://www.alaniztechnologies.com
awesome guy too. when i showed up to pick up my head, it wasn't quite ready because he had been out all night picking up a car of his that broke down at Laguna Seca. He said it would be about 4 more hours for him to finish my head & he offered to ship it to me for free if i didn't want to wait. I was cool with waiting though, he even gave me a discount cuz of the wait.
edit:
some pics for the hell of it
Modified by strsi at 11:58 PM 12/14/2005
Modified by strsi at 11:59 PM 12/14/2005
Modified by strsi at 11:59 PM 12/14/2005
but the common rule of thumb for all the guys here at Cali is go with portflow for good work with a quick turn around time, but if you have some time to kill send it to Alaniz for a little bit better port.</TD></TR></TABLE>
works for me! alaniz did a great job on my head, & only took about a week.
http://www.alaniztechnologies.com
awesome guy too. when i showed up to pick up my head, it wasn't quite ready because he had been out all night picking up a car of his that broke down at Laguna Seca. He said it would be about 4 more hours for him to finish my head & he offered to ship it to me for free if i didn't want to wait.
I was cool with waiting though, he even gave me a discount cuz of the wait.edit:
some pics for the hell of it
Modified by strsi at 11:58 PM 12/14/2005
Modified by strsi at 11:59 PM 12/14/2005
Modified by strsi at 11:59 PM 12/14/2005
12-14-2005, 05:51 PM
#17
Honda-Tech Member
Re: (GUILOTINE)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by GUILOTINE »</TD></TR><TR><TD CLASS="quote">
really? you guys prefer RLZ over Portflow or Alaniz weird. Any particular reasons?
BTW- Ive never personally dealt with RLZ but the common rule of thumb for all the guys here at Cali is go with portflow for good work with a quick turn around time, but if you have some time to kill send it to Alaniz for a little bit better port.</TD></TR></TABLE>
says who?
tom had my head done in a week a few years ago, it was around the winter time when business wasnt as busy...
really? you guys prefer RLZ over Portflow or Alaniz weird. Any particular reasons?
BTW- Ive never personally dealt with RLZ but the common rule of thumb for all the guys here at Cali is go with portflow for good work with a quick turn around time, but if you have some time to kill send it to Alaniz for a little bit better port.</TD></TR></TABLE>
says who?
tom had my head done in a week a few years ago, it was around the winter time when business wasnt as busy...
12-14-2005, 06:13 PM
#18
Kill Gil
Re: (onepoint6i)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by onepoint6i »</TD></TR><TR><TD CLASS="quote">
says who?
tom had my head done in a week a few years ago, it was around the winter time when business wasnt as busy...</TD></TR></TABLE>
huh? re-read my reply.
Portflow is good and fast, turnaround time is usually 7-10 days
Alaniz is usually regarded as the best porter on the west coast, but again he takes to long. He advertises at leats 3-4weeks. Ive heard sometimes it takes months.
RLZ knows his **** to, and he is a H-T member
says who?
tom had my head done in a week a few years ago, it was around the winter time when business wasnt as busy...</TD></TR></TABLE>
huh? re-read my reply.
Portflow is good and fast, turnaround time is usually 7-10 days
Alaniz is usually regarded as the best porter on the west coast, but again he takes to long. He advertises at leats 3-4weeks. Ive heard sometimes it takes months.
RLZ knows his **** to, and he is a H-T member
12-14-2005, 06:18 PM
#19
Honda-Tech Member
Re: (GUILOTINE)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by GUILOTINE »</TD></TR><TR><TD CLASS="quote">
huh? re-read my reply.
Portflow is good and fast, turnaround time is usually 7-10 days
Alaniz is usually regarded as the best porter on the west coast, but again he takes to long. He advertises at leats 3-4weeks. Ive heard sometimes it takes months.</TD></TR></TABLE>
here lemme rephrase...
who says alaniz is better??
my other statement has nothin to do with your previous response...
huh? re-read my reply.
Portflow is good and fast, turnaround time is usually 7-10 days
Alaniz is usually regarded as the best porter on the west coast, but again he takes to long. He advertises at leats 3-4weeks. Ive heard sometimes it takes months.</TD></TR></TABLE>
here lemme rephrase...
who says alaniz is better??
my other statement has nothin to do with your previous response...
12-14-2005, 06:20 PM
#20
Kill Gil
Re: (onepoint6i)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by onepoint6i »</TD></TR><TR><TD CLASS="quote">
here lemme rephrase...
who says alaniz is better??
my other statement has nothin to do with your previous response...</TD></TR></TABLE>
Everyone I know who has used both porters. Shaun Church recomended the exact same thing and he persoanlly knows both. RLZ also told me in his honest opinion Alaniz is the best porter on the west coast.
Nobody said Portflow isnt good though
here lemme rephrase...
who says alaniz is better??
my other statement has nothin to do with your previous response...</TD></TR></TABLE>
Everyone I know who has used both porters. Shaun Church recomended the exact same thing and he persoanlly knows both. RLZ also told me in his honest opinion Alaniz is the best porter on the west coast.
Nobody said Portflow isnt good though
12-14-2005, 06:29 PM
#22
Honda-Tech Member
Re: (Rocket)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Rocket »</TD></TR><TR><TD CLASS="quote">Read my sig. I just changed it today.</TD></TR></TABLE>
what did you see robert? more secrets...?
no wonder us san diegans are so slow...we have no one to "teach" us..well at least I dont...
what did you see robert? more secrets...?
no wonder us san diegans are so slow...we have no one to "teach" us..well at least I dont...
12-14-2005, 06:31 PM
#23
Kill Gil
Re: (onepoint6i)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by onepoint6i »</TD></TR><TR><TD CLASS="quote">no wonder us san diegans are so slow.</TD></TR></TABLE>
Speak for yourself fawker
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by onepoint6i »</TD></TR><TR><TD CLASS="quote">we have no one to "teach" us..well at least I dont... </TD></TR></TABLE>
I teach you something new everyday pendeho
Speak for yourself fawker
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by onepoint6i »</TD></TR><TR><TD CLASS="quote">we have no one to "teach" us..well at least I dont...
</TD></TR></TABLE>I teach you something new everyday pendeho
12-14-2005, 06:33 PM
#24
Honda-Tech Member
Re: (GUILOTINE)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by GUILOTINE »</TD></TR><TR><TD CLASS="quote">
Speak for yourself fawker
I teach you something new everyday pendeho </TD></TR></TABLE>
hahaa..
nothin compared to the knowledge these cats have...its all trial and error thats been goin on for years and years...thats the best experience one could have...especially when you do it for a living..
Speak for yourself fawker
I teach you something new everyday pendeho
</TD></TR></TABLE>hahaa..
nothin compared to the knowledge these cats have...its all trial and error thats been goin on for years and years...thats the best experience one could have...especially when you do it for a living..
12-14-2005, 09:07 PM
#25
Re: Where Should i Send My Head For PORTED n POLISH.. (clean rice)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by clean rice »</TD></TR><TR><TD CLASS="quote"><FONT COLOR="blue"><FONT SIZE="20">RLZ </FONT></FONT>
Hondaraceengines.com
Honda-Tech screen name = MAX_CFM
/thread. </TD></TR></TABLE>
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Rocket »</TD></TR><TR><TD CLASS="quote">Read my sig. I just changed it today.</TD></TR></TABLE>
<FONT SIZE="20"><FONT COLOR="black">RLZ</FONT></FONT>
Hondaraceengines.com
Honda-Tech screen name = MAX_CFM
/thread. </TD></TR></TABLE>
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Rocket »</TD></TR><TR><TD CLASS="quote">Read my sig. I just changed it today.</TD></TR></TABLE>
<FONT SIZE="20"><FONT COLOR="black">RLZ</FONT></FONT>