THE VALVE TRAIN POLL
11-07-2005, 07:36 PM
#1
Member
Thread Starter
Join Date: Jan 2003
Location: so-cal, usa
Posts: 1,282
Likes: 0
Received 0 Likes
on
0 Posts
THE VALVE TRAIN POLL
I know there are going to be more options then what my little mind can think up for now so here go's. I'm doing this mainly because I have skunk2 stage1 cams and want to know what is the best bang for my buck is + I want to know what the H-T.com members think is the best is. I only want to do it once my cams can only get bigger hehe so whats is the best?
I should also add that my head(b16a2)
We should also do this for: cams, pistons, rods, rings, cam gears whos really got the lightest & strongest that just me. H-T.com are the real R&D ppl
Modified by racer4life at 10:12 PM 11/7/2005
Modified by racer4life at 2:25 PM 12/3/2005
I should also add that my head(b16a2)
We should also do this for: cams, pistons, rods, rings, cam gears whos really got the lightest & strongest that just me. H-T.com are the real R&D ppl
Modified by racer4life at 10:12 PM 11/7/2005
Modified by racer4life at 2:25 PM 12/3/2005
11-07-2005, 08:12 PM
#2
Honda-Tech Member
Re: THE VALVE TRAIN POLL (racer4life)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by racer4life »</TD></TR><TR><TD CLASS="quote">I should also add that my head(b16a2) is at portflow right now bein held up because of this I was just goin to go with PF's but would they hold up to say stage3 cams& 9500rpm's? poll first advice second
</TD></TR></TABLE>
didn't you ask tom this? why would you ask this here when he's doing your head?
</TD></TR></TABLE>
didn't you ask tom this? why would you ask this here when he's doing your head?
11-07-2005, 08:36 PM
#3
New User
Join Date: Feb 2001
Location: SLC, Ut
Posts: 548
Likes: 0
Received 0 Likes
on
0 Posts
Re: THE VALVE TRAIN POLL (racer4life)
Sorry, I clicked on 'WNBA' to see who the fuci they are... You can safely subtract 1 from their sorry *** representation in this poll since I don't know who they are and have never used their products.
11-07-2005, 09:10 PM
#4
Member
Thread Starter
Join Date: Jan 2003
Location: so-cal, usa
Posts: 1,282
Likes: 0
Received 0 Likes
on
0 Posts
Re: THE VALVE TRAIN POLL (onepoint6i)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by onepoint6i »</TD></TR><TR><TD CLASS="quote">
didn't you ask tom this? why would you ask this here when he's doing your head?
</TD></TR></TABLE>
I didn't think about it till I started writing this poll. I will call him tomorrow for sure and ask. I still want to know the best I not mesh with it later and have a prob.
didn't you ask tom this? why would you ask this here when he's doing your head?
</TD></TR></TABLE>
I didn't think about it till I started writing this poll. I will call him tomorrow for sure and ask. I still want to know the best I not mesh with it later and have a prob.
11-07-2005, 10:01 PM
#5
Honda-Tech Member
Join Date: Jan 2005
Location: CA
Posts: 598
Likes: 0
Received 0 Likes
on
0 Posts
Re: THE VALVE TRAIN POLL (racer4life)
I'm not sure what type of cams ur asking this for, ur s2s1 or bigger ones?
But anyways, i have omni w/ my s2s1's & they're holing up great, about 8k on them so far
But anyways, i have omni w/ my s2s1's & they're holing up great, about 8k on them so far
11-08-2005, 04:58 AM
#6
Honda-Tech Member
why nobody like toda valve train? i currious can it handle cam with 12.9 valve lift just like skunk 2 pro series stg 2, because that was the cam that i have and i also plann to use it with my toda valve springs...
Trending Topics
11-08-2005, 08:35 AM
#9
Honda-Tech Member
iTrader: (3)
Join Date: Jan 2000
Location: Bloomington, IN, USA
Posts: 10,180
Likes: 0
Received 3 Likes
on
3 Posts
Re: THE VALVE TRAIN POLL (racer4life)
Toda for anything 12.5mm or less and Ferrea for most any application (more or less than 12.5mm, up to 13.5mm or 14mm depending on the package you use).
11-08-2005, 08:56 PM
#15
Re: (rochesterricer)
If you look at the amount of serious motors that are here on H-T, you might be surprised at how many use the RM line. I always use T-bone as a reference, he's got 200+ dyno pulls with the biggest of cams that are out there. He's had the highest of lift's, and the longest of durations past 10k and have NEVER once dropped a valve. The intresting thing is that he runs Rockets gen 2 springs, which have the lightest spring preasure of the 2. That alone was a seller for me, and I've had my M22's, according to my factory tach(which is off), past 9.5 several times. Never once had a problem.....
If you're intrested in prices, contact Aquafina, he has awesome customer service.
If you're intrested in prices, contact Aquafina, he has awesome customer service.
11-09-2005, 12:26 AM
#16
Join Date: Aug 2005
Location: Ventura, CA, U.S
Posts: 83
Likes: 0
Received 0 Likes
on
0 Posts
Re: (jt-sport)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jt-sport »</TD></TR><TR><TD CLASS="quote">why nobody like toda valve train? i currious can it handle cam with 12.9 valve lift just like skunk 2 pro series stg 2, because that was the cam that i have and i also plann to use it with my toda valve springs... </TD></TR></TABLE>
im happy with my toda valvetrain...they're good enough for my s2s2's and 9.2k redline with no problems
im happy with my toda valvetrain...they're good enough for my s2s2's and 9.2k redline with no problems
11-11-2005, 12:47 PM
#23
HT White Ops
Re: THE VALVE TRAIN POLL (Rocket)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Rocket »</TD></TR><TR><TD CLASS="quote">Schmithelm Springs
$800 a set from Cosworth.</TD></TR></TABLE>
Hmm, I wonder how much the pneumatic springs in F1 cost
$800 a set from Cosworth.</TD></TR></TABLE>
Hmm, I wonder how much the pneumatic springs in F1 cost
11-11-2005, 02:17 PM
#25
Honda-Tech Member
Join Date: Jun 2003
Location: Richmond,, British Columbia, Canada
Posts: 1,150
Likes: 0
Received 0 Likes
on
0 Posts
Re: THE VALVE TRAIN POLL (Big Teggie)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Big Teggie »</TD></TR><TR><TD CLASS="quote">Rocket valvtrain is good 
I am using the 1st gen outers only with RLZ cams and have no problems at all.
</TD></TR></TABLE>
oooh nice, i might give that a try, i have some Gen1's sitting infront of me
btw, whats the specs of the RLZ cams? stg 1,2,3?
I am using the 1st gen outers only with RLZ cams and have no problems at all.
</TD></TR></TABLE>
oooh nice, i might give that a try, i have some Gen1's sitting infront of me
btw, whats the specs of the RLZ cams? stg 1,2,3?