doing a wire tuck
10-09-2005, 06:06 PM
#1
Honda-Tech Member
Thread Starter
Join Date: Sep 2002
Location: Virginia
Posts: 915
Likes: 0
Received 0 Likes
on
0 Posts
doing a wire tuck
ok i searched this and it was not stated in any of the posts i found
when tucking wires, is it needed that you cut the plugs off or should they fit threw the hole that you have to tuck threw? thank you in advance
when tucking wires, is it needed that you cut the plugs off or should they fit threw the hole that you have to tuck threw? thank you in advance
10-09-2005, 07:07 PM
#2
Join Date: Jul 2002
Location: Bay Area, Ca, USA
Posts: 1,670
Likes: 0
Received 0 Likes
on
0 Posts
Re: doing a wire tuck (Mefain)
You can de-pin the wires/pins from the plugs if you don't need to extend the wires.
Get a precision screw driver set.
Get a precision screw driver set.
10-10-2005, 09:09 AM
#3
Honda-Tech Member
Thread Starter
Join Date: Sep 2002
Location: Virginia
Posts: 915
Likes: 0
Received 0 Likes
on
0 Posts
as far as i can tell nothign needs to be extended, and i talked to another guy on here that has tucked one and he said that all i need to do is tuck the postives and just reground the grounds, but that confuses me, i guess i would just need a step by step, but i guess depining would be easier than cutting and re wiring
10-10-2005, 03:18 PM
#5
Honda-Tech Member
Re: (vw eater)
hell put some pix and write up i got my motor out and seen a pic of this last week and was oh dam 
...i might wanna do that too cuz it looked crazy clean
...i might wanna do that too cuz it looked crazy clean
10-16-2005, 01:37 AM
#7
Honda-Tech Member
Thread Starter
Join Date: Sep 2002
Location: Virginia
Posts: 915
Likes: 0
Received 0 Likes
on
0 Posts
ok so i been messing with it for the past 2 days, i cant seem to figure out how to depin the plugs and i really dont wanna cut anything, are there any tricks to depinning the plugs or what? i have the precision screwdrivers, just cant figure it out
Trending Topics
10-16-2005, 05:32 PM
#14
Honda-Tech Member
Thread Starter
Join Date: Sep 2002
Location: Virginia
Posts: 915
Likes: 0
Received 0 Likes
on
0 Posts
i seen that bay b4, i just cant figure out how to depin the headlight plugs, those are the only plugs that wont go threw the supplied hole in the fender well
10-23-2005, 05:44 PM
#15
Honda-Tech Member
Thread Starter
Join Date: Sep 2002
Location: Virginia
Posts: 915
Likes: 0
Received 0 Likes
on
0 Posts
damn this **** is hard, im still not done with mine, i finished the driver side, started on the pass side last night, there is alot more on that side, plus my OBD1 conversion clutters it even more
10-23-2005, 06:49 PM
#20
Senior Member
Join Date: Dec 2004
Location: EMAIL ME at Chase@ChaseBaysOnline.com
Posts: 10,137
Likes: 0
Received 0 Likes
on
0 Posts
Re: (SkipMic2006)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SkipMic2006 »</TD></TR><TR><TD CLASS="quote">i would wanna do this on 1 full weekend when i have bunch of times .....is it possiable to do this when the engine is in the car?</TD></TR></TABLE>
Yes, very possible. I did it with my motor in the car
Yes, very possible. I did it with my motor in the car
10-25-2005, 03:31 PM
#23
Honda-Tech Member
Thread Starter
Join Date: Sep 2002
Location: Virginia
Posts: 915
Likes: 0
Received 0 Likes
on
0 Posts
well i knew that much, being as its the same as the driver, but there is less wires and plugs on the driver, i was lookin for tips or hints on the passenger side
10-25-2005, 04:13 PM
#24
The Boot
Join Date: Dec 2001
Location: Arizona, US
Posts: 9,841
Likes: 0
Received 0 Likes
on
0 Posts
Re: (kid-honda)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by kid-honda »</TD></TR><TR><TD CLASS="quote">Here is a super old pick of mine, I dont even have that motor or front end anymore.</TD></TR></TABLE>
so when are you doing a write up?
so when are you doing a write up?
10-25-2005, 04:20 PM
#25
Honda-Tech Member
