Was playing around at my shop today..
#1
Honda-Tech Member
Thread Starter
Join Date: Mar 2003
Location: Bakersfield, CA
Posts: 1,928
Likes: 0
Received 0 Likes
on
0 Posts
Was playing around at my shop today..
well first things first..Rockets (www.m24x.com) new line of cams are on hit!!! Iam in love with the new M21's..my car gained another life due to M21's!!!..well anyways..after playing with my tune I managed to blow my clutch on the dyno on this last run..I filled the cabin of the car with clutch smoke..it sucked..but I have a killer dyno sheet to show you guys..here it is..this is 19 psi of boost with the clutch slipping BADLY!!!!!
#4
Honda-Tech Member
Thread Starter
Join Date: Mar 2003
Location: Bakersfield, CA
Posts: 1,928
Likes: 0
Received 0 Likes
on
0 Posts
Re: Was playing around at my shop today.. (turbozxi)
yeah I was going to go for 15K but the damn clutch..J/P
funny thing was everyone in the shop said the car sounded like a F1 car at it peak..hehe..I love it..
funny thing was everyone in the shop said the car sounded like a F1 car at it peak..hehe..I love it..
#6
Honda-Tech Member
Join Date: Sep 2002
Location: tha East Coast
Posts: 6,022
Likes: 0
Received 0 Likes
on
0 Posts
Re: Was playing around at my shop today.. (turbozxi)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by turbozxi »</TD></TR><TR><TD CLASS="quote">I bet you should of filmed it. </TD></TR></TABLE>
hell yeah, very nice
Fix that clutch and get us some vids!!
hell yeah, very nice
Fix that clutch and get us some vids!!
#7
Honda-Tech Member
Join Date: Jul 2004
Location: Norway
Posts: 428
Likes: 0
Received 0 Likes
on
0 Posts
Re: Was playing around at my shop today.. (JDM S1eeper)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by JDM S1eeper »</TD></TR><TR><TD CLASS="quote">hell yeah, very nice
Fix that clutch and get us some vids!! </TD></TR></TABLE>
Also, what's the setup?
Fix that clutch and get us some vids!! </TD></TR></TABLE>
Also, what's the setup?
Trending Topics
#9
Honda-Tech Member
Thread Starter
Join Date: Mar 2003
Location: Bakersfield, CA
Posts: 1,928
Likes: 0
Received 0 Likes
on
0 Posts
Re: Was playing around at my shop today.. (StolenTeg)
the power dropped due to the clutch..I have a 791 whp dyno (6 runs before the clutch blow) that makes power to right around 10,700 rpm..Iam running a big *** turbo..set up is..
Dart Block
81.5mm cp custom pistons (9.6-1 comp)
type r crank
RM rods
B16A head (ported by me)
RM M21 cams
RM springs and retainers (damn near 3 years old!)
supertech valves
ITR lma's
JG/Edlebrock intake mani
junk2 TB (soon to be RPM service)
(4) 1000cc injectors and (4) 550cc injectors
AEM ems
DIS with hall effect kit
AEM C2DI
AEM injector driver
Full Race top mount
PT71GTQ (.68 a/r exhaust )
3 inch downpipe (no exhaust)
PTE 750 IC
thats about it..there is most likely more..but Iam beat..
Dart Block
81.5mm cp custom pistons (9.6-1 comp)
type r crank
RM rods
B16A head (ported by me)
RM M21 cams
RM springs and retainers (damn near 3 years old!)
supertech valves
ITR lma's
JG/Edlebrock intake mani
junk2 TB (soon to be RPM service)
(4) 1000cc injectors and (4) 550cc injectors
AEM ems
DIS with hall effect kit
AEM C2DI
AEM injector driver
Full Race top mount
PT71GTQ (.68 a/r exhaust )
3 inch downpipe (no exhaust)
PTE 750 IC
thats about it..there is most likely more..but Iam beat..
#11
Honda-Tech Member
Thread Starter
Join Date: Mar 2003
Location: Bakersfield, CA
Posts: 1,928
Likes: 0
Received 0 Likes
on
0 Posts
Re: Was playing around at my shop today.. (Adi Raaa)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Adi Raaa »</TD></TR><TR><TD CLASS="quote">Were you over 40psi for that 791whp#?</TD></TR></TABLE>
nope but close..I have however had the turbo up in the low 50's on boost..now that is scary!!!
nope but close..I have however had the turbo up in the low 50's on boost..now that is scary!!!
#15
Honda-Tech Member
Thread Starter
Join Date: Mar 2003
Location: Bakersfield, CA
Posts: 1,928
Likes: 0
Received 0 Likes
on
0 Posts
Re: Was playing around at my shop today.. (Adi Raaa)
AEM ems boost control..VSS based..but I set it flat on the dyno to 19.05 psi at all speeds..
#18
Honda-Tech Member
Thread Starter
Join Date: Mar 2003
Location: Bakersfield, CA
Posts: 1,928
Likes: 0
Received 0 Likes
on
0 Posts
Re: Was playing around at my shop today.. (Rob Dizzle)
for the last 19 days I have..lol we opened on the 10th..
greatest **** in the world..I can dyno anytime I want..Iam going back in 45 minutes to tune a allmotor car..
greatest **** in the world..I can dyno anytime I want..Iam going back in 45 minutes to tune a allmotor car..
#22
Honda-Tech Member
Join Date: Jan 2004
Location: Boise, ID
Posts: 475
Likes: 0
Received 0 Likes
on
0 Posts
Re: Was playing around at my shop today.. (99Hybrid_Hatch)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Adi Raaa »</TD></TR><TR><TD CLASS="quote">11'000rpm, wtf this belongs in the all motor forum! lol. Were you over 40psi for that 791whp#?</TD></TR></TABLE>
That's some crazy power.
That's some crazy power.
#24
sh!t happens.
Join Date: Apr 2003
Location: greenVILLE, SC
Posts: 7,734
Likes: 0
Received 0 Likes
on
0 Posts
Re: Was playing around at my shop today.. (HRTuning)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by HRTuning »</TD></TR><TR><TD CLASS="quote">11,000, I love it! </TD></TR></TABLE>