where did you get your bolts for a motor stand?
#1
where did you get your bolts for a motor stand?
ok ive figured out the thread its m12 1.25 right? so ive went to orchard, home depot, kragen, and auto zone and no one has that big of a metric bolt. i have the bolts that go from the tranny to the motor but they are too short for the little arms on the motor stand. so where can i get some metric bolts that big? thanks
#6
Member
Join Date: Dec 2001
Location: FIVE.ZERO.THREE
Posts: 5,448
Likes: 0
Received 0 Likes
on
0 Posts
Re: where did you get your bolts for a motor stand? (Innovation)
local hardwear store.
take the trany bolt with you. find a nut that fits it. then find a longer bolt that fits that nut. cant go wrong.
take the trany bolt with you. find a nut that fits it. then find a longer bolt that fits that nut. cant go wrong.
#7
Re: where did you get your bolts for a motor stand? (envision2teg)
yea i know the thread size but i guess its just my town no one caries a large supply of metric bolts no stores have them.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DonF »</TD></TR><TR><TD CLASS="quote">Hacksaw. </TD></TR></TABLE>
thats what i was thinking actually cut off wheel
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DonF »</TD></TR><TR><TD CLASS="quote">Hacksaw. </TD></TR></TABLE>
thats what i was thinking actually cut off wheel
Trending Topics
#8
Re: where did you get your bolts for a motor stand? (e jay one)
use the bolts for the motor mounts if u have any extras...passenger,driver, and rear mount...the long 17's the hold the mount to the frame...they work for me
#9
Re: where did you get your bolts for a motor stand? (AllMoToRB18c)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by AllMoToRB18c »</TD></TR><TR><TD CLASS="quote">use the bolts for the motor mounts if u have any extras...passenger,driver, and rear mount...the long 17's the hold the mount to the frame...they work for me </TD></TR></TABLE>
your a genius i never thought of that hopefully i have 4 looks like i gotta go diggin in the garage.
your a genius i never thought of that hopefully i have 4 looks like i gotta go diggin in the garage.
#10
Honda-Tech Member
Join Date: May 2002
Location: Oklahoma City,, Oklahoma, Da 73170
Posts: 913
Likes: 0
Received 0 Likes
on
0 Posts
Re: where did you get your bolts for a motor stand? (AllMoToRB18c)
Ace Hardware, metrics bolt are uber $$$ though. There are ways around that though.
#12
Honda-Tech Member
Join Date: May 2003
Location: Dirty South, USA
Posts: 432
Likes: 0
Received 0 Likes
on
0 Posts
Re: where did you get your bolts for a motor stand? (AllMoToRB18c)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by AllMoToRB18c »</TD></TR><TR><TD CLASS="quote">use the bolts for the motor mounts if u have any extras...passenger,driver, and rear mount...the long 17's the hold the mount to the frame...they work for me </TD></TR></TABLE>
I keep an extra set around.
I keep an extra set around.
#16
Re: where did you get your bolts for a motor stand? (DonF)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DonF »</TD></TR><TR><TD CLASS="quote">Hacksaw. </TD></TR></TABLE>
yea, i just cut half of the little legs off, then I can get an inch or more of thread from a bellhoushing bolt in there.
makes access to the rear main seal hard, but that is no big deal.
yea, i just cut half of the little legs off, then I can get an inch or more of thread from a bellhoushing bolt in there.
makes access to the rear main seal hard, but that is no big deal.
#18
Re: (civicgsr19)
yea i found them at ace $4.50 each! <TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by civicgsr19 »</TD></TR><TR><TD CLASS="quote">DAMN!!!!!!
I just said they were standard bolts. I can't pay 4 bux a piece for damn bolts.</TD></TR></TABLE>
i tried that but the ladie went to the back and checked.
I just said they were standard bolts. I can't pay 4 bux a piece for damn bolts.</TD></TR></TABLE>
i tried that but the ladie went to the back and checked.
Thread
Thread Starter
Forum
Replies
Last Post
Squad Walker
Honda Prelude
8
12-13-2007 01:30 PM
80884
Welding / Fabrication
19
05-10-2005 02:17 PM