Another Turbo'd D-series
#1
Honda-Tech Member
Thread Starter
Join Date: Dec 2003
Location: Bridgeview, IL, USA
Posts: 2,331
Likes: 0
Received 0 Likes
on
0 Posts
Another Turbo'd Sohc (56k go home)
Well, after planning on it for a good while and slowly accumulating the kit peice by peice, i have finally turbo'd my car. Its a junkyard turbo kit based around a 42/48 T3. I dont know what to say, and pics are cooler than words, so here ya go:
Ready for all Questions, Comments or Flaming(you will get cussed at)
The N/A setup:
Turbo setup:
Downpipe (custom fabbed by 90BlackCrx) bolted up to Turbo
My friend Drew (CrxDrew) Cuttin **** for clearance
The radiator bracket made to fit my EG radiator.
Drew's failed attempt to weld to aluminum
Engine shots:
Bov Jb Welded to the pipe, holds strong
Downpipe bolted up and on the car, good amount of clearace
Frontal shots:
Arial view of the radiator and intercooler, both gangsta leaned.
I didnt have a gasket, so we fabbed one up out of sheet metal for now.
And thats about it for now. It was definately well worth it, spools up nicely and doesnt burn any oil. Still got a few kinks to work out but, all and all i'm satisfied. Thanks for lookin
Modified by 89SiPimpin at 3:51 AM 5/22/2005
Ready for all Questions, Comments or Flaming(you will get cussed at)
The N/A setup:
Turbo setup:
Downpipe (custom fabbed by 90BlackCrx) bolted up to Turbo
My friend Drew (CrxDrew) Cuttin **** for clearance
The radiator bracket made to fit my EG radiator.
Drew's failed attempt to weld to aluminum
Engine shots:
Bov Jb Welded to the pipe, holds strong
Downpipe bolted up and on the car, good amount of clearace
Frontal shots:
Arial view of the radiator and intercooler, both gangsta leaned.
I didnt have a gasket, so we fabbed one up out of sheet metal for now.
And thats about it for now. It was definately well worth it, spools up nicely and doesnt burn any oil. Still got a few kinks to work out but, all and all i'm satisfied. Thanks for lookin
Modified by 89SiPimpin at 3:51 AM 5/22/2005
#4
Honda-Tech Member
Thread Starter
Join Date: Dec 2003
Location: Bridgeview, IL, USA
Posts: 2,331
Likes: 0
Received 0 Likes
on
0 Posts
Re: Another Turbo'd Sohc (B16aDasher)
Theres no internals as of yet. I had a delta 272 cam before, but it caused a bunch of idle issues, so i pulled it off b4 installing the kit so i'd be able to know if everything was workin out alright. I've got another a6 that i am plannin to build up and drop in sometime in the near future.
Fuel management is TurboEdit chipped pm6 ecu and DSM 450's.
Fuel management is TurboEdit chipped pm6 ecu and DSM 450's.
Trending Topics
#11
Honda-Tech Member
Thread Starter
Join Date: Dec 2003
Location: Bridgeview, IL, USA
Posts: 2,331
Likes: 0
Received 0 Likes
on
0 Posts
Re: Another Turbo'd Sohc (BrokeAssPinoy)
Thanks all. Yea I'll be at the meet. If it doesnt blow up again....
I had first boosted it Monday evening, and the next day, while driving, the radiator cracked and it overheated and blew the headgasket. So got it back up and running thursday with a new radiator and the stock cam and shes as u see her now. I'm lovin it.
I had first boosted it Monday evening, and the next day, while driving, the radiator cracked and it overheated and blew the headgasket. So got it back up and running thursday with a new radiator and the stock cam and shes as u see her now. I'm lovin it.
#15
Honda-Tech Member
Thread Starter
Join Date: Dec 2003
Location: Bridgeview, IL, USA
Posts: 2,331
Likes: 0
Received 0 Likes
on
0 Posts
Re: Another Turbo'd Sohc (yudalicious)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by yudalicious »</TD></TR><TR><TD CLASS="quote">so where's the turbo? and what you doing w/ that engine? My pepsi bottle has more displacement... I'm counting the days until it blows.
JK </TD></TR></TABLE>
Lol. Damn Nissan ownin bastard.<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Contender25 »</TD></TR><TR><TD CLASS="quote">It looks good, you need a fluidyne racing aluminum radiator bud. </TD></TR></TABLE>
Nah its fine as it is. I got a dual core eg radiator off ebay for a good price. Its workin out great so far.
JK </TD></TR></TABLE>
Lol. Damn Nissan ownin bastard.<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Contender25 »</TD></TR><TR><TD CLASS="quote">It looks good, you need a fluidyne racing aluminum radiator bud. </TD></TR></TABLE>
Nah its fine as it is. I got a dual core eg radiator off ebay for a good price. Its workin out great so far.
#16
Honda-Tech Member
Join Date: Aug 2003
Location: Kicking ass in the desert, CA
Posts: 1,831
Likes: 0
Received 0 Likes
on
0 Posts
Nice thread title... real original .
Don't rag on the IC welding lol. I said it probably wasn't gonna work neway.
That pic of the radiator bracket just won't do it justice. Haha...
Brandon- "**** this radiator won't sit right"
Drew- *already pounding away at some metal*
Brandon- "wtf?"
Drew *welding and admiring"
Good job stupid. I should be allowed to paint my image on the side of ur car considering the time put in.
Don't rag on the IC welding lol. I said it probably wasn't gonna work neway.
That pic of the radiator bracket just won't do it justice. Haha...
Brandon- "**** this radiator won't sit right"
Drew- *already pounding away at some metal*
Brandon- "wtf?"
Drew *welding and admiring"
Good job stupid. I should be allowed to paint my image on the side of ur car considering the time put in.
#19
Honda-Tech Member
Join Date: Jun 2001
Location: U don't want any of this PA
Posts: 2,521
Likes: 0
Received 0 Likes
on
0 Posts
Re: (CRXDrew)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by CRXDrew »</TD></TR><TR><TD CLASS="quote">this thread needs more cowbell</TD></TR></TABLE>
hahaha
hahaha
#20
Honda-Tech Member
Re: (CRXDrew)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by CRXDrew »</TD></TR><TR><TD CLASS="quote">
Good job stupid. I should be allowed to paint my image on the side of ur car considering the time put in. </TD></TR></TABLE>
I got the right side, I called it
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by CRXDrew »</TD></TR><TR><TD CLASS="quote">Brandon- "**** this radiator won't sit right"
Drew- *already pounding away at some metal*
Brandon- "wtf?"
Drew *welding and admiring"
</TD></TR></TABLE>
Glad you took care of him , I was gonna fix the radiator the second time he came back, I could not stand it hovering in the air.
Good job stupid. I should be allowed to paint my image on the side of ur car considering the time put in. </TD></TR></TABLE>
I got the right side, I called it
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by CRXDrew »</TD></TR><TR><TD CLASS="quote">Brandon- "**** this radiator won't sit right"
Drew- *already pounding away at some metal*
Brandon- "wtf?"
Drew *welding and admiring"
</TD></TR></TABLE>
Glad you took care of him , I was gonna fix the radiator the second time he came back, I could not stand it hovering in the air.
#21
Honda-Tech Member
Re: Another Turbo'd Sohc (89SiPimpin)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 89SiPimpin »</TD></TR><TR><TD CLASS="quote"> the radiator cracked and it overheated and blew the headgasket. </TD></TR></TABLE> when i installed my turbo my radiator blew up (just before i got a chance to test drive it....but the head gasket was fine) but nice work with the turbo
#22
Honda-Tech Member
Join Date: Sep 2004
Location: Seven OH Eight, IL, USA
Posts: 987
Likes: 0
Received 0 Likes
on
0 Posts
Re: Another Turbo'd Sohc (hatchinprogress)
Nice ride....alls i need is a new ecu to get it chipped and ill be a Turbo ninja....
Reppin NWH......
Reppin NWH......
#25
Honda-Tech Member
Join Date: Oct 2003
Location: Chi town burbs, IL, United States
Posts: 2,084
Likes: 0
Received 0 Likes
on
0 Posts
Re: (lilblackhatch91)
what the hell is goin on?
Why is everyone wit an EF getting a turbo? Huh? i wanna know!!
Damnit Drew its all your fault. You turbo trend setting bastard.
Once i get back from KY i gotta see what the new and improve EF sqaud has to offer.
Drew and Brandon good job wit the turbo install.(notice how i put Drew's name first haha)
Why is everyone wit an EF getting a turbo? Huh? i wanna know!!
Damnit Drew its all your fault. You turbo trend setting bastard.
Once i get back from KY i gotta see what the new and improve EF sqaud has to offer.
Drew and Brandon good job wit the turbo install.(notice how i put Drew's name first haha)