MugenDC4

I've just recently did a auto > Manual conv. and needed some help on wiring the reverse lights. I've search around and many people said it was the Green and Yellow wire near the breather (The thin tube with the black cap) and wire it back to where the original auto shifter was. The problem is, i can't seem to find the green and yellow wire anywhere. I found 3 lose plugs two which is (Green/blue) and one is (Red/white) which i highly doubt because its near the starter.






Anyone help will be appreciated thx

Runnerdown

In your first pic...the connector to the right of letter "A" is the reverse..but what is it connected to on your harness?

MugenDC4

thx man you were right about the connector next to Letter "A" was the reverse. Weird part was that the yellow/green connector on the tranny did nothing, most likey it was from the auto. It was actually Green/Green + black stripe for my reverse. The pigtail on my auto shifter was yellow/green though which gave me power to my reverse lights. The guy who did my swap probably connected the auto reverse harness to the manual reverse harness. But I finally finish splicing the wires to the pigtail and got my lights to work Appreciate the help