In the process of a repaint (progress pics)
#1
Thread Starter
Join Date: Sep 2003
Location: Buffalo, NY, USA
Posts: 609
Likes: 0
Received 0 Likes
on
0 Posts
In the process of a repaint (progress pics)
So I bought my 94 cx hatch during winter and when it got to my house it was a bit dirty
A good washing and it looked pretty nice, especially in the pictures it looked a lot cleaner than in person
There are dings, dents, chips, fading.... normal for an 11 year old car. Also there are a handful of surface rust spots, so I decided to have my uncle just do a repaint.
So my dad and I start taking it apart in my garage:
Then we took the car over to my uncles shop yesterday, and today we went over there to do a bit of work on it.
Now i've never done ANY body work or anything whatsoever, so I was able to learn how to DA a bit, and worked on the roof, back bumper, and the hatch. My dad took a few things from the engine bay so we can spray around the edges and clean it up in there a tad.
Before doing anything to the rear
Other than the DA, my uncle cut a peice of metal from my stock hood and filled in the holes where a Honda symbol would normally go above the lisence plate (i didn't have one... so i figured let's take out the wholes and clean it up).
Some simple flat black spray paint on the back of the seats and some spackle paint in the spare tire well really cleaned up the trunk. We did these a week or so ago.
That's all for now. I don't really know how to do much, so I might miss some of the steps since my uncle will be doing it, but I'll get more pics when I can.
Thanks for looking and check back for updates
A good washing and it looked pretty nice, especially in the pictures it looked a lot cleaner than in person
There are dings, dents, chips, fading.... normal for an 11 year old car. Also there are a handful of surface rust spots, so I decided to have my uncle just do a repaint.
So my dad and I start taking it apart in my garage:
Then we took the car over to my uncles shop yesterday, and today we went over there to do a bit of work on it.
Now i've never done ANY body work or anything whatsoever, so I was able to learn how to DA a bit, and worked on the roof, back bumper, and the hatch. My dad took a few things from the engine bay so we can spray around the edges and clean it up in there a tad.
Before doing anything to the rear
Other than the DA, my uncle cut a peice of metal from my stock hood and filled in the holes where a Honda symbol would normally go above the lisence plate (i didn't have one... so i figured let's take out the wholes and clean it up).
Some simple flat black spray paint on the back of the seats and some spackle paint in the spare tire well really cleaned up the trunk. We did these a week or so ago.
That's all for now. I don't really know how to do much, so I might miss some of the steps since my uncle will be doing it, but I'll get more pics when I can.
Thanks for looking and check back for updates
#5
Thread Starter
Join Date: Sep 2003
Location: Buffalo, NY, USA
Posts: 609
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Corea)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Corea »</TD></TR><TR><TD CLASS="quote">Sweet I wish my dad was into that kind of stuff and had that kind of talent </TD></TR></TABLE>
word, it's pretty cool having him to help me with my car
it's also nice having an uncle that owns a shop haha
word, it's pretty cool having him to help me with my car
it's also nice having an uncle that owns a shop haha
#7
Re: (ChadB)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ChadB »</TD></TR><TR><TD CLASS="quote">keep us posted on the updates!</TD></TR></TABLE>
Trending Topics
#8
Thread Starter
Join Date: Sep 2003
Location: Buffalo, NY, USA
Posts: 609
Likes: 0
Received 0 Likes
on
0 Posts
Re: In the process of a repaint (Type X)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Type X »</TD></TR><TR><TD CLASS="quote">get steelies so you dont get more crap on your wheels
and whats up with those TL wheels in the background
</TD></TR></TABLE>
no idea really haha, i didn't even notice those
and whats up with those TL wheels in the background
</TD></TR></TABLE>
no idea really haha, i didn't even notice those
#10
Re: (JSN_LQ)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by JSN_LQ »</TD></TR><TR><TD CLASS="quote">cant wait to see the outcome</TD></TR></TABLE>
#11
Honda-Tech Member
Join Date: Apr 2004
Location: Toronto, On, Canada
Posts: 2,996
Likes: 0
Received 0 Likes
on
0 Posts
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Corea »</TD></TR><TR><TD CLASS="quote">Sweet I wish my dad was into that kind of stuff and had that kind of talent </TD></TR></TABLE>
#13
Thread Starter
Join Date: Sep 2003
Location: Buffalo, NY, USA
Posts: 609
Likes: 0
Received 0 Likes
on
0 Posts
Re: (conFusedEG)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by conFusedEG »</TD></TR><TR><TD CLASS="quote">im literally doing the same exact thing with engine out and ****. What color you going with. I might do a milano with copper bronze pearl. Nice work.</TD></TR></TABLE>
i'm just doing a repaint of the milano. The door jams are pretty much mint, plus it'll be cheaper and easier
i'm just doing a repaint of the milano. The door jams are pretty much mint, plus it'll be cheaper and easier
#17
Honda-Tech Member
iTrader: (1)
Join Date: May 2003
Location: SO Cal
Posts: 8,570
Likes: 0
Received 0 Likes
on
0 Posts
Re: (ChadB)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ChadB »</TD></TR><TR><TD CLASS="quote">keep us posted on the updates!</TD></TR></TABLE>
#18
That's what she said!
Join Date: Mar 2004
Location: Garbage Grove, CA
Posts: 11,545
Likes: 0
Received 0 Likes
on
0 Posts
Re: (ChadB)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ChadB »</TD></TR><TR><TD CLASS="quote">keep us posted on the updates!</TD></TR></TABLE>
#19
Honda-Tech Platinum Member
Join Date: Apr 2004
Location: Chicongoland area, IL
Posts: 5,767
Likes: 0
Received 3 Likes
on
2 Posts
Re: (Dforce)
Nice... I kept looking at your muffler because at the first pic I thought it was an n1 or n1 style then when I saw the next pics it said magnaflow and had a thicker tip compare to the one shown in the first pic
#20
Thread Starter
Join Date: Sep 2003
Location: Buffalo, NY, USA
Posts: 609
Likes: 0
Received 0 Likes
on
0 Posts
Re: (BrokeAssPinoy)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by BrokeAssPinoy »</TD></TR><TR><TD CLASS="quote">Nice... I kept looking at your muffler because at the first pic I thought it was an n1 or n1 style then when I saw the next pics it said magnaflow and had a thicker tip compare to the one shown in the first pic</TD></TR></TABLE>
the first shot it had a tsudo muffler on, which i'll prob try and sell on ebay, haha
it was way too big for my taste, angled horribly, too low, too loud, and sounded horrible.... the magnaflow is smaller, straight, quieter, and a bit better sounding IMO.
the first shot it had a tsudo muffler on, which i'll prob try and sell on ebay, haha
it was way too big for my taste, angled horribly, too low, too loud, and sounded horrible.... the magnaflow is smaller, straight, quieter, and a bit better sounding IMO.
#21
Thread Starter
Join Date: Sep 2003
Location: Buffalo, NY, USA
Posts: 609
Likes: 0
Received 0 Likes
on
0 Posts
just stopped over real fast tonight to grab the strut tower brace to just put a fresh coat of paint on since it's a bit chipped and such, and they had my new fenders on (the old ones were pretty nasty after we took them off.... a lot of rust.
I think my uncle is gunna start body work tomorrow
I think my uncle is gunna start body work tomorrow
#24
Member
Join Date: Dec 2001
Location: FIVE.ZERO.THREE
Posts: 5,448
Likes: 0
Received 0 Likes
on
0 Posts
Re: (ukdm crx)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ukdm crx »</TD></TR><TR><TD CLASS="quote">mmm new fenders </TD></TR></TABLE>
word.
word.
#25
Thread Starter
Join Date: Sep 2003
Location: Buffalo, NY, USA
Posts: 609
Likes: 0
Received 0 Likes
on
0 Posts
Re: In the process of a repaint (eeeKs)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by eeeKs »</TD></TR><TR><TD CLASS="quote">
hahahah kool rear screen!~~ </TD></TR></TABLE>
haha, i was bored
hahahah kool rear screen!~~ </TD></TR></TABLE>
haha, i was bored