best traction bars
#1
Honda-Tech Member
Thread Starter
Join Date: Sep 2002
Location: Vernon, ct, united states
Posts: 706
Likes: 0
Received 0 Likes
on
0 Posts
best traction bars
What are the best traction bars for ef? Did a search and found some stuff but really wanna see what peoples opinions are.
#3
Honda-Tech Member
Join Date: Nov 2002
Location: San Jose/ Monterey, ca, usa
Posts: 5,846
Likes: 0
Received 1 Like
on
1 Post
Re: (davens)
I like jimfab for price/quality. If I were rich I would have the full race
Ryan
edit: i guess im rich, because I have the fullrace now
Modified by droppedcrxsi at 8:16 PM 11/26/2006
Ryan
edit: i guess im rich, because I have the fullrace now
Modified by droppedcrxsi at 8:16 PM 11/26/2006
Trending Topics
#12
Re: best traction bars (JapJunkie)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by JapJunkie »</TD></TR><TR><TD CLASS="quote">Which traction bar is the one to get that enables the use of an eg radiator, comes w/ radius rods, and you dont have to lean the rad. back?..like the full race...</TD></TR></TABLE>
Lcon bars do that.
Good Day,
RH.
Lcon bars do that.
Good Day,
RH.
#16
Honda-Tech Member
iTrader: (1)
Re: (notec oldhatch)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by notec oldhatch »</TD></TR><TR><TD CLASS="quote">ive got the PR on mine, i like it. Low as hell though if I hit anything thats what hits.
</TD></TR></TABLE>
ive got the same one, it works to get a eg radiator in there. when i get rich ill get the z10 and solve my wheel hop problems.
i like the full race bars the most, but they wont fit a eg radiator.
</TD></TR></TABLE>
ive got the same one, it works to get a eg radiator in there. when i get rich ill get the z10 and solve my wheel hop problems.
i like the full race bars the most, but they wont fit a eg radiator.
#17
Re: (PaImportTuner)
i have a fullrace bar, the only complaint is that the eg radiator wont fit unless you lean it back, instead of leaning it back i ghettotied it.
I wouldnt get the z10 it cost more than the fullrace and the guy that designed the full-race bars, is the same guy that designed the z10. The z10 design is like 5 years old, where the full-race is a new updated design using better materials and better engineering.
I would of got the jimfab but it was 375 and the full race i got for 415 shipped. I think Full-Race presents there products better, and i cant tell if its better than the jimfab because i do not own a jimfab but for 40 extra bucks it wasnt a big gamble. from what i can tell in the pics the full-race bar looks stronger and offers almost an extra 2 inches for header clearance, i could easily run a 4inch downpipe if i wanted to, Ive heard that the jim fab barely clears a jdm ITR header.
I wouldnt get the z10 it cost more than the fullrace and the guy that designed the full-race bars, is the same guy that designed the z10. The z10 design is like 5 years old, where the full-race is a new updated design using better materials and better engineering.
I would of got the jimfab but it was 375 and the full race i got for 415 shipped. I think Full-Race presents there products better, and i cant tell if its better than the jimfab because i do not own a jimfab but for 40 extra bucks it wasnt a big gamble. from what i can tell in the pics the full-race bar looks stronger and offers almost an extra 2 inches for header clearance, i could easily run a 4inch downpipe if i wanted to, Ive heard that the jim fab barely clears a jdm ITR header.
#19
Honda-Tech Member
Join Date: Feb 2002
Location: ef lander, pantsparty, 0
Posts: 2,497
Likes: 0
Received 0 Likes
on
0 Posts
Re: (notec oldhatch)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by notec oldhatch »</TD></TR><TR><TD CLASS="quote">ive got the PR on mine, i like it. Low as hell though if I hit anything thats what hits.
</TD></TR></TABLE>place racing isnt a traction bar! watch out it may break
</TD></TR></TABLE>place racing isnt a traction bar! watch out it may break
#21
Re: (notec oldhatch)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by notec oldhatch »</TD></TR><TR><TD CLASS="quote"> and it was better than the stock, mines holding up quite well w/ my b18</TD></TR></TABLE>
It might be better than stock as far as clearace, and being able to fit a eg radiator, but your going to be up **** creek when you get in a front end collision,
It might be better than stock as far as clearace, and being able to fit a eg radiator, but your going to be up **** creek when you get in a front end collision,
#22
Honda-Tech Member
Join Date: Jan 2004
Location: San Diego, CA, USA
Posts: 858
Likes: 0
Received 0 Likes
on
0 Posts
Re: (slowpokesi)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by slowpokesi »</TD></TR><TR><TD CLASS="quote">It might be better than stock as far as clearace, and being able to fit a eg radiator, but your going to be up **** creek when you get in a front end collision, </TD></TR></TABLE>
ok, but didn't your full-race bar replace the factory crossmember?
ok, but didn't your full-race bar replace the factory crossmember?
#23
Re: (KFBhonda)
yes, it did, and that full race bar is about 50 times stronger than that peice of **** place racing bar.
If that bar is anything like there shitty *** mounts, then i seriously hope you dont get in a wreck, i have snapped (2) place racing mounts, and there products are ****.
I might be on the full-race bandwagon, but there traction bar is the strongest bar that you can buy as of right now. Im sure somebody will make something to top them.
If that bar is anything like there shitty *** mounts, then i seriously hope you dont get in a wreck, i have snapped (2) place racing mounts, and there products are ****.
I might be on the full-race bandwagon, but there traction bar is the strongest bar that you can buy as of right now. Im sure somebody will make something to top them.
#24
Honda-Tech Double Platinum Member
Re: (slowpokesi)
Ive got the Jimfab and i love it. It gives a shitload more clearance for downpipes and headers. It also did away with most of the wheel hop i was getting...which helped straight line acceleration alot. The thing that i like the most though is the fact that the whole front end is so much more responsive...especially in hard cornering.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by slowpokesi »</TD></TR><TR><TD CLASS="quote">I would of got the jimfab but it was 375 and the full race i got for 415 shipped.</TD></TR></TABLE>
Damn...Jimfab mustve gone up. I got mine about 2 years ago from Wil at Exospeed and i think it was somewhere in the $325 shipped range
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by slowpokesi »</TD></TR><TR><TD CLASS="quote">I would of got the jimfab but it was 375 and the full race i got for 415 shipped.</TD></TR></TABLE>
Damn...Jimfab mustve gone up. I got mine about 2 years ago from Wil at Exospeed and i think it was somewhere in the $325 shipped range
#25
Honda-Tech Member
Re: (sCeRaXn)
anyone want to create links for each bar... or where to get them
also... why would you want an EJ radiator? they are half the size... which means half the cooling capacity... which means, bad!
also... why would you want an EJ radiator? they are half the size... which means half the cooling capacity... which means, bad!