1992 240sx coupe with ca18det with T61 Os twin plate 450+rwp for sale
#1
Honda-Tech Member
Thread Starter
Join Date: Apr 2002
Location: downtown munson, munson, JAPAN
Posts: 746
Likes: 0
Received 0 Likes
on
0 Posts
1992 240sx coupe with ca18det with T61 Os twin plate 450+rwp for sale
I have a following car for sale. car is in located at VA
JDM ca18det with 38K on it. great compression , tested and leak down tested as well.
TOMEI 1.2mm headgasket
TOMEI 270 duration cams
TOMEI cam gears
TOMEI valve springs
fully built head with ported polished with brand new 3 angle valve job, seals, valve stems, cold tanked and fully assembled by professional.
streetdynamic T61/70 hybrid turbo with .58 AR , plus .86 AR come with it too
stianless steel tubular manifld, with 302 stainless steel 3 inch downpipe, with intercooler pipe.
Greddy FMIC
HKS vpc GCC with safc2
MINE's chipped ecu
OS giken twin plate clucth
os giken clucth kit
precision 880cc injectors
NISMO fuel pressure regulator
R33 GTR fuel pump conversion
CUSCO full coilovers
JDM uras full stainless steel exhasut
S15 shifter with brand new bushing and eveyrthing
R32 GTS throttle body
VOLK GTU with 80% of tires
Blitz black light carbon fiber gauges x5
-----------------------------------------------------------
on the dyno it made 301rwp with 286tq with 12psi with stock head stock cams and everything. due to the spark plugs took a dump, it made misfire and I could not pull more than 5800rpm which I am reving to 7800 with stock head.. with new set up it will make power all the way to 8500 no problem.
car is in great condition and ready to run 10s.. I know the guy ran 10.91 at VMP with 360rwp with slicks.. my set up will make alot more than what he pulled on dyno.
here is couple of pic
http://host.atomicfire.net/use...t.jpg
http://host.atomicfire.net/use...d.jpg
http://host.atomicfire.net/use...y.jpg
http://host.atomicfire.net/use...d.jpg
http://host.atomicfire.net/use...e.jpg
http://host.atomicfire.net/use...7.jpg
http://host.atomicfire.net/use...h.jpg
asking 9500 or best offer or trade for civic SI
email me at t88hlexus@hotmail.com
JDM ca18det with 38K on it. great compression , tested and leak down tested as well.
TOMEI 1.2mm headgasket
TOMEI 270 duration cams
TOMEI cam gears
TOMEI valve springs
fully built head with ported polished with brand new 3 angle valve job, seals, valve stems, cold tanked and fully assembled by professional.
streetdynamic T61/70 hybrid turbo with .58 AR , plus .86 AR come with it too
stianless steel tubular manifld, with 302 stainless steel 3 inch downpipe, with intercooler pipe.
Greddy FMIC
HKS vpc GCC with safc2
MINE's chipped ecu
OS giken twin plate clucth
os giken clucth kit
precision 880cc injectors
NISMO fuel pressure regulator
R33 GTR fuel pump conversion
CUSCO full coilovers
JDM uras full stainless steel exhasut
S15 shifter with brand new bushing and eveyrthing
R32 GTS throttle body
VOLK GTU with 80% of tires
Blitz black light carbon fiber gauges x5
-----------------------------------------------------------
on the dyno it made 301rwp with 286tq with 12psi with stock head stock cams and everything. due to the spark plugs took a dump, it made misfire and I could not pull more than 5800rpm which I am reving to 7800 with stock head.. with new set up it will make power all the way to 8500 no problem.
car is in great condition and ready to run 10s.. I know the guy ran 10.91 at VMP with 360rwp with slicks.. my set up will make alot more than what he pulled on dyno.
here is couple of pic
http://host.atomicfire.net/use...t.jpg
http://host.atomicfire.net/use...d.jpg
http://host.atomicfire.net/use...y.jpg
http://host.atomicfire.net/use...d.jpg
http://host.atomicfire.net/use...e.jpg
http://host.atomicfire.net/use...7.jpg
http://host.atomicfire.net/use...h.jpg
asking 9500 or best offer or trade for civic SI
email me at t88hlexus@hotmail.com
#4
Junior Member
Join Date: Feb 2003
Location: vagina beach, va
Posts: 672
Likes: 0
Received 0 Likes
on
0 Posts
i really like the car alot, and would deffinetly dog mine on a straight away, gimme some pics of the outside, and inside that werent taken on your cell phone, and i get your rims if we trade
#5
Honda-Tech Member
Thread Starter
Join Date: Apr 2002
Location: downtown munson, munson, JAPAN
Posts: 746
Likes: 0
Received 0 Likes
on
0 Posts
Re: (eknine)
it will not be on couple of days due to the snow and ice we have.. we cant even go anywhere. so I will take some pic whenever I get a chance
Trending Topics
#8
Honda-Tech Member
Thread Starter
Join Date: Apr 2002
Location: downtown munson, munson, JAPAN
Posts: 746
Likes: 0
Received 0 Likes
on
0 Posts
Re: 1992 240sx coupe with ca18det with T61 Os twin plate 450+rwp for sale (JeffS)
ca18det is made to take huge amout of boost, unlike sr20.. one of reason is due ot the iron block VS alumin. sr20 block and internal is so weak and I have worked on enugh of sr20 that is blwpw or about to take a crap.
ca18 has less displacement than sr20 however, it doest have a rocker arm like sr. which means anywhere 8500-9200 is not a problem for ca, but sr .. 50/50 chance the rocker arm will fly.
I have received many parts from japan, because I have a hook ups.
I have worked on enough ca18 and sr20 to know what parts to get or not.
ca18 will take so much more boost than sr20 if you are taking about stock to stock..
stock bottom end will hold up to 1.8bar which I am planning to boost it at. and ecu is chipped by mines for the specific set up.
sr20det is great and it has more tq but ca can boost the crap out of it and rev it up to make high number power. plus little bit lighter.
car alreay made 301 286 at 12psi. with ONLY at 5800rpw due to the spark plug. you will know what would happen when I can push 1.5bar at 8500rpm.
ca18 has less displacement than sr20 however, it doest have a rocker arm like sr. which means anywhere 8500-9200 is not a problem for ca, but sr .. 50/50 chance the rocker arm will fly.
I have received many parts from japan, because I have a hook ups.
I have worked on enough ca18 and sr20 to know what parts to get or not.
ca18 will take so much more boost than sr20 if you are taking about stock to stock..
stock bottom end will hold up to 1.8bar which I am planning to boost it at. and ecu is chipped by mines for the specific set up.
sr20det is great and it has more tq but ca can boost the crap out of it and rev it up to make high number power. plus little bit lighter.
car alreay made 301 286 at 12psi. with ONLY at 5800rpw due to the spark plug. you will know what would happen when I can push 1.5bar at 8500rpm.
#9
Honda-Tech Member
Thread Starter
Join Date: Apr 2002
Location: downtown munson, munson, JAPAN
Posts: 746
Likes: 0
Received 0 Likes
on
0 Posts
Re: 1992 240sx coupe with ca18det with T61 Os twin plate 450+rwp for sale (JeffS)
thanks jeffs. let em know if you can work somthing out.
#14
Honda-Tech Member
Thread Starter
Join Date: Apr 2002
Location: downtown munson, munson, JAPAN
Posts: 746
Likes: 0
Received 0 Likes
on
0 Posts
Re: 1992 240sx coupe with ca18det with T61 Os twin plate 450+rwp for sale (bigbusiness)
about 4500-4600 full boost. its not that bad since I have another 4000rpm to go..
#15
Honda-Tech Member
Re: 1992 240sx coupe with ca18det with T61 Os twin plate 450+rwp for sale (yellow munson)
I'm confused a bit on your turbo spec. Is it a .70 AR exhaust or is it .86AR? THe lag's not as bad as I thought.
#16
Honda-Tech Member
Thread Starter
Join Date: Apr 2002
Location: downtown munson, munson, JAPAN
Posts: 746
Likes: 0
Received 0 Likes
on
0 Posts
Re: 1992 240sx coupe with ca18det with T61 Os twin plate 450+rwp for sale (Pat McGroin)
AR is .58 on the car, however, it also come with .86AR extra ex housing for free.. is that make sense?
#19
Re: (eknine)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by eknine »</TD></TR><TR><TD CLASS="quote">whats a munson?
</TD></TR></TABLE>
</TD></TR></TABLE>
#24
Honda-Tech Counsellor
Re: (yellow munson)
Any suspension work on it?
Please tell me that all that power is not being put down to the ground through stock shocks and 12 year old rotten bushings.
Please tell me that all that power is not being put down to the ground through stock shocks and 12 year old rotten bushings.
#25
Honda-Tech Member
Thread Starter
Join Date: Apr 2002
Location: downtown munson, munson, JAPAN
Posts: 746
Likes: 0
Received 0 Likes
on
0 Posts
Re: (confusedJDMvwGTI)
if you are interested on buying or trade .. pm me I will tell you what has done to the suspenion and everything.