Pics of current b-series project...
#1
Honda-Tech Member
Thread Starter
Join Date: Jul 2004
Location: CA, USA
Posts: 731
Likes: 0
Received 0 Likes
on
0 Posts
Pics of current b-series project...(56k BEWARE!!!!!!!)
This b-series is going in a all aluminum sand rail. Enjoy!
Modified by VenGeanceDrag at 9:59 AM 9/29/2004
Modified by VenGeanceDrag at 11:59 AM 10/1/2004
Modified by VenGeanceDrag at 9:54 PM 3/15/2005
Modified by VenGeanceDrag at 9:59 AM 9/29/2004
Modified by VenGeanceDrag at 11:59 AM 10/1/2004
Modified by VenGeanceDrag at 9:54 PM 3/15/2005
#5
Honda-Tech Member
Thread Starter
Join Date: Jul 2004
Location: CA, USA
Posts: 731
Likes: 0
Received 0 Likes
on
0 Posts
Re: Pics of current b-series project... (lsed-eg)
b18b bottom end with a 3/4" deck riser.
Sleeved to 85mm.
CP 15:0.1 Custom pistons.
Cunningham Ultra lite rods - 6.1" length.
97.6mm stroke, knifed, re-heat treated.
Endyn cylinder head.
Moroso dry-sump setup.
AIR Intake Manifold.
Crane and Ferrera roller rockers and cams. (custom specs.)
ecu-882 engine management.
Running on Ethanol.
Burns collector, I made the header, with 1 3/4" primarys, then 1 7/8".
Sleeved to 85mm.
CP 15:0.1 Custom pistons.
Cunningham Ultra lite rods - 6.1" length.
97.6mm stroke, knifed, re-heat treated.
Endyn cylinder head.
Moroso dry-sump setup.
AIR Intake Manifold.
Crane and Ferrera roller rockers and cams. (custom specs.)
ecu-882 engine management.
Running on Ethanol.
Burns collector, I made the header, with 1 3/4" primarys, then 1 7/8".
#6
Re: Pics of current b-series project... (VenGeanceDrag)
JEEZ! 15:1!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Holy ****, what number's are you planning on putting down?
That's a nice header, what chassis is it going into?
and how much did that all cost you? for just the motor... man.. that's crazy.
That's a nice header, what chassis is it going into?
and how much did that all cost you? for just the motor... man.. that's crazy.
Trending Topics
#8
Honda-Tech Member
Thread Starter
Join Date: Jul 2004
Location: CA, USA
Posts: 731
Likes: 0
Received 0 Likes
on
0 Posts
Re: Pics of current b-series project... (GumballNA)
I am hoping for 350 to the flywheel. Its going in a all-aluminum sand rail frame.
Cost for the engine alone ran me somewhere from 10,000-12,000. Stop counting after awhile, and all the parts were at least jobber if not wholesale dist. prices....
Cost for the engine alone ran me somewhere from 10,000-12,000. Stop counting after awhile, and all the parts were at least jobber if not wholesale dist. prices....
#9
Re: Pics of current b-series project... (VenGeanceDrag)
sweet... what body? (i.e. civic/prelude etc.)
what track number's are you looking at?
Are you going to compete against Durst, aguilar etc.? or just for your personal enjoyment?
Keep up the good work man, i love seening more NA applications and Less turbo.
what track number's are you looking at?
Are you going to compete against Durst, aguilar etc.? or just for your personal enjoyment?
Keep up the good work man, i love seening more NA applications and Less turbo.
#10
Honda-Tech Member
Thread Starter
Join Date: Jul 2004
Location: CA, USA
Posts: 731
Likes: 0
Received 0 Likes
on
0 Posts
Re: Pics of current b-series project... (GumballNA)
The engine is actually going in a Sand Rail frame. I have a 89' civic 4 door that it was supposed to go in, but I dont have any kind of corporate sponsor or any sponsor in that matter, so I am going to have my fun in the sand......
#11
Honda-Tech Member
Join Date: Jul 2003
Location: USA
Posts: 2,496
Likes: 0
Received 0 Likes
on
0 Posts
Re: Pics of current b-series project... (GumballNA)
DAYYYYUUUMM> B-series on ethanol. Sweet, definitely the most exciting build i have ever seen for a b-series, that's awesome! what exactly are sand rails, racing dune buggies?
#12
Join Date: Sep 2003
Location: Stockton Streetracer, Ca, unitedstates
Posts: 1,049
Likes: 0
Received 0 Likes
on
0 Posts
Re: Pics of current b-series project... (GumballNA)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by GumballNA »</TD></TR><TR><TD CLASS="quote">sweet... what body? (i.e. civic/prelude etc.)
what track number's are you looking at? </TD></TR></TABLE>
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by VenGeanceDrag »</TD></TR><TR><TD CLASS="quote">I am hoping for 350 to the flywheel. Its going in a all-aluminum sand rail frame.
</TD></TR></TABLE> any pic's of the sandrail? nice set up
what track number's are you looking at? </TD></TR></TABLE>
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by VenGeanceDrag »</TD></TR><TR><TD CLASS="quote">I am hoping for 350 to the flywheel. Its going in a all-aluminum sand rail frame.
</TD></TR></TABLE> any pic's of the sandrail? nice set up
#14
Re: Pics of current b-series project... (Chillinit)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Chillinit »</TD></TR><TR><TD CLASS="quote">stupid question....the blue component connected to the crank pulley is an external oil pump?</TD></TR></TABLE>
You are correct
You are correct
#20
Re: (stock93cx)
haha, screw a pic of the sand rail, any pic's of the pistons... that would be a site to see! haha
I would have loved to see an 89 civic 4 dr. NA, drag car.. that would have been nice.
I would have loved to see an 89 civic 4 dr. NA, drag car.. that would have been nice.
#22
Sexy Cheese Cake
Join Date: Feb 2004
Location: Ill INoise, U.S. of A
Posts: 2,444
Likes: 0
Received 0 Likes
on
0 Posts
Re: (stock93cx)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by VenGeanceDrag »</TD></TR><TR><TD CLASS="quote"> 97.6mm stroke </TD></TR></TABLE>
forget horsepower what torque are u shoting for with that stroke
forget horsepower what torque are u shoting for with that stroke
#23
Re: Pics of current b-series project... (VenGeanceDrag)
Hey, I see a BrotherHood race way sign. Big Willie at Terminal Island, back in the days. You owe me 10,000 hot dogs Willie!!
#25
Honda-Tech Member
Thread Starter
Join Date: Jul 2004
Location: CA, USA
Posts: 731
Likes: 0
Received 0 Likes
on
0 Posts
Re: (GumballNA)
Man o man, now your asking alot, naw j/p. I will post them when I get home, I dont have them here at work, AND THANKS FOR ALL THE PROPS......