FS: Hondata Stage 4B
#1
Honda-Tech Member
Thread Starter
Join Date: Feb 2002
Location: land of the sheep, home of the hypocrite
Posts: 2,072
Likes: 0
Received 0 Likes
on
0 Posts
FS: Hondata Stage 4B
I'm selling my Hondata Stage 4B. This system comes with the hondata link box, the link cable, the software CD, and a few various switches, push-button, and shift light. This system will let you tune your ignition and fuel maps, VTEC switch point, handle boost, full throttle shift, three stage rev limiter, datalog, ROMeditor, etc. etc. You can tune other Hondata systems with this setup. It's basically like the new S200 system with all the bells and whistles except the new G-sensor. This does NOT include the Honda ECU or the ROM burner/programmer. The system will work with most of the Honda OBD1 ecu's; the hondata web site lists the exact ECU's and applications it will work with. I'm asking $850 shipped within the US. I can include some N/A H22 base maps, which hondata does NOT supply. I had to tune these maps on my own with a wide band O2 and dyno time. If you are doing a B-series, there are a lot of maps you can download from the hondata web site. The CD comes with a lot of B-series base maps and boost maps to get you started. Also, I can put up pics of the system, but it looks just like the stuff on the hondata web page. Some of the parts are still in the packaging. I never used the full throttle shift or the shift light, etc. Let me know if you want pics or have more questions. Thanks...
Trending Topics
#8
Honda-Tech Member
Thread Starter
Join Date: Feb 2002
Location: land of the sheep, home of the hypocrite
Posts: 2,072
Likes: 0
Received 0 Likes
on
0 Posts
Re: FS: Hondata Stage 4B (EG6owner)
Well, it comes with everything I said. So, you will need a supported OBD 1 ecu, like the P28 I'm also selling. You will also need the "pocket programmer" (there are different brands that will also work) to burn the roms or else the romulator. You can get these from hondata or on ebay as well. If you have a OBD 2 car, then you need a OBD 2 -> OBD 1 conversion harness. You can also get these from hondata I think. Probably a few other places too, like ebay or the classifieds here. If you want to run more than 1bar boost, then you need a GM 3bar map sensor. I suppose you will need a computer to use the hondata software, but if you are reading this now, you probably already have that... The hondata web page has all the details on how their systems work and what they require.
Modified by flyrod at 9:05 PM 5/16/2003
Modified by flyrod at 9:09 PM 5/16/2003
Modified by flyrod at 9:05 PM 5/16/2003
Modified by flyrod at 9:09 PM 5/16/2003
#12
Honda-Tech Member
iTrader: (7)
Join Date: Feb 2003
Location: World Domination, United States
Posts: 4,989
Likes: 0
Received 1 Like
on
1 Post
Re: FS: Hondata Stage 4B (flyrod)
[QUOTE]You will also need the "pocket programmer" (there are different brands that will also work) to burn the roms or else the romulator. QUOTE]
whats this pocket programer about
whats this pocket programer about
#13
Honda-Tech Member
Thread Starter
Join Date: Feb 2002
Location: land of the sheep, home of the hypocrite
Posts: 2,072
Likes: 0
Received 0 Likes
on
0 Posts
Re: FS: Hondata Stage 4B (thrty8street)
The programmer is what writes the bin file to a chip that you install in the ECU. They are on ebay all the time...
#17
Honda-Tech Member
Thread Starter
Join Date: Feb 2002
Location: land of the sheep, home of the hypocrite
Posts: 2,072
Likes: 0
Received 0 Likes
on
0 Posts
Re: FS: Hondata Stage 4B (weraider30)
Been a while since I looked for a ROM programmer. Should be able to get one for less than $100 pretty easy. As for the P28, here is the thread for that:
https://honda-tech.com/zerothread?id=500546
I also have a P72 available. Thanks for checking out the thread...
https://honda-tech.com/zerothread?id=500546
I also have a P72 available. Thanks for checking out the thread...