kcjohnnyboy's Daily Sedan and Project
#1
Honda-Tech Member
Thread Starter
kcjohnnyboy's Daily Sedan and Project
Here is my daily driver Honda Civic sedan. I'm pretty much done with adding parts to the outside, I'm satisfied with it. Some engine appearance upgrades will be added once I get time. Until then, here are some pictures
Comments are welcomed
Comments are welcomed
#3
id ditch the fake front lip.
grill looks ok.
sus and rear combo looks good.
good start...id pick up an sir lip since you're slammed. they are polyurethane so they wont fck up. that one you have now will crack easy since its abs. just a little info.
grill looks ok.
sus and rear combo looks good.
good start...id pick up an sir lip since you're slammed. they are polyurethane so they wont fck up. that one you have now will crack easy since its abs. just a little info.
#6
Honda-Tech Member
Join Date: May 2007
Location: NJ, USA
Posts: 3,328
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Brice.Hayden)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Brice.Hayden »</TD></TR><TR><TD CLASS="quote">cheaper is clearly not better. lip looks like ***
.</TD></TR></TABLE>
ctr lip, no? or is that a replica?
Anyway i like it a lot, especially that rear end. Looks better than the 96-98 imo.
.</TD></TR></TABLE>
ctr lip, no? or is that a replica?
Anyway i like it a lot, especially that rear end. Looks better than the 96-98 imo.
Trending Topics
#8
Honda-Tech Member
Thread Starter
it's a CTR replica front lip. i like the way it sits as black because it matches my side moldings and skirts so it will stay black. and, the fender, i have yet to find an oem silver one to replace it.
#9
Honda-Tech Member
Thread Starter
Re: kcjohnnyboy's Daily Sedan and Project (kcjohnnyboy)
I just finished the diy on my valve cover this weekend. Not bad for my first time painting a valve cover
#10
Junior Member
Join Date: Apr 2008
Location: MiAmi, FL, UsA
Posts: 420
Likes: 0
Received 0 Likes
on
0 Posts
Re: kcjohnnyboy's Daily Sedan and Project (kcjohnnyboy)
Red/Clear tails, SI front end and some JDM Visors "or replicas for $39.95" would really set that thing off..!!
Modified by 1CaMw0nDeR at 11:01 PM 7/13/2008
Modified by 1CaMw0nDeR at 11:01 PM 7/13/2008
#14
Honda-Tech Member
Thread Starter
Re: kcjohnnyboy's Daily Sedan and Project (1CaMw0nDeR)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 1CaMw0nDeR »</TD></TR><TR><TD CLASS="quote">Where'd you get the wrinkle red paint from..?? VHT online..???</TD></TR></TABLE>
I got the wrinkle paint at my local O'Reily's Autoparts store.
Thanks for the comments guys, its coming along nicely and the way I would like it to be. I also did the map light install on it also just earlier today
I got the wrinkle paint at my local O'Reily's Autoparts store.
Thanks for the comments guys, its coming along nicely and the way I would like it to be. I also did the map light install on it also just earlier today
#16
Honda-Tech Member
Thread Starter
Re: kcjohnnyboy's Daily Sedan and Project
just finished up installing my powered spoon replica Ebay mirrors and took more pictures... Enjoy!!
#17
Honda-Tech Member
Thread Starter
Re: kcjohnnyboy's Daily Sedan and Project
i'm also in the process of completing a integra rear leather sedan gray seats...more pictures of that when i get time
#21
Honda-Tech Member
Thread Starter
Re: (Brice.Hayden)
yeah, and they are not all the way down in the front and rear, still have about 18 clicks or so to go in the front and ten in the rear. i would go lower but my b pipe on my apexi catback is already half an inch off the ground
#25
Honda-Tech Member
Join Date: May 2008
Location: Jacksonville, Fl, USA
Posts: 418
Likes: 0
Received 0 Likes
on
0 Posts
Re: kcjohnnyboy's Daily Sedan and Project
Lookin good.
I'd black the inside of the headlights, fix the fender, and get some visors. Other than that I really like the car.
I'd black the inside of the headlights, fix the fender, and get some visors. Other than that I really like the car.
Thread
Thread Starter
Forum
Replies
Last Post
r4adkshn1
Forced Induction
13
02-24-2003 02:31 PM