Print  Email  Subscribe  RSS  Help
 Sleeved Motor, S300, T4/T67 partout thread! [Archived]
Author Post

JdMhEaD




Offline

1889 posts [100%]
Fnck thieves AL
9-8-2006
  Sleeved Motor, S300, T4/T67 partout thread!« » Reply  Edit


I know i made a thread a while back with most of this stuff, but i decided to try and hold on to it, but then i went ahead and bought a 2002 Honda S2000, so now, the hatch is disassembled and everything is ready to sell.

ALL PRICES OBO!!!!!!

I have many MANY vouches on here, all positive eBay transactions, and Paypal verified.

Drive Train:

Motor has approx 10k miles on it MAX! It is inline pro built, and tuned. This motor is every bit capable of handling 700whp when REBUILT! I have vouches of the motor from Inline pro, Nick (7k Rdlne) who i bought the swap from, and Brian fisher, who tuned the motor. Made 370whp on 11psi and 433whp on 16psi (capable of more with bigger injectors)
The oil pump needs to be replaced, and i believe the thrust washers took a dumpin the motor,as it has crank walk. I drove the car, went inside, changed clothes, then came out and cranked it and the oil light would not go off. I trailered the car to my buddys house and we took the motor out.
For the full long block: MAKE ME AN OFFER!!!! :00000
2000 LS bottom end
Golden Eagle Sleeved to 84mm
Endyn Pistons
Eagle Rods
GSR crank and girdle (micropolished and balanced)
Toda Oil Pump Gear
Moroso Oil Pan
ARP Headstuds
B16 Head
Combustion chambers bored to 84mm
Crower springs and retainers
Crower cam gears
B16 Cams
ITR Valve cover

Edelbrock Intake Manifold for B16 (IACV and IAT included) - $300

Edelbrock 65mm Throttle - $225

AEM Fuel Rail - $50

RC 750cc injectors - $250

GM 3 bar map with pigtail - $50

Inline Pro SS t4 manifold (38mm flange) - $400 OBO!

Precision T4/T67 turbo - $800

3 inch downpipe - $100

3 inch exhaust with Vibrant 3 inch muffler (fits 94-01 tegs) - $250 (pick up only)

TurboSmart 38mm wastegate(7lb spring) and Inline Pro dumptube - $250

Inline Pro Intercooler piping with couplers and t bolt clamps. set up for EG/DC with Edelbrock manifold With HKS STYLE BOV. The pipe from the turbo to the intercooler needs to be replaced.- $200

Intercooler (big) - $150

Turbo XS Dual Stage Boost controller - $100

Fidanza Flywheel - $80

Competition Clutch Stg 5 (1500 miles on this thing!) - $250

Hasport Mounts for EG/DC for b series Hydro trans - $250


bad pic of rear mount

Hondata S300 with P28- SOLD

MSD ignition:
OBD 2 Distributor, HVC external coil, Digital 6 box.
$275

Border Seats Carbon Fiber back with EG/DC rails (super low) - $1100 with rails for both seats
These seats sell for almost 1000 a piece new. Drivers seat has some minor wear, and sun fade, Passenger seat is mint.

The shell!

$2000
BRING YOUR OWN WHEELS!!!!!
1994 Honda Civic DX Hatchback
It is as bare as it gets. Has close to 200k miles on it, but comes with LS integra dash, with GSR cluster that says 14x,000 miles on it.Shell Has no Heat, no power steering, no AC, no blower motor, no seats, stock suspension! There is a dent in the passenger side quarter panel that has been quoted $500-$850 to get fixed.

Other Goodies included in shell:

Spoon style carbon duckbill

SI brakes

Painted Outside and inside (no bay paint) New Beige Pearl from Nissan Datsun cars!

Carbon Fiber Hood

Carbon fiber laid over factory rear hatch

Fully tucked engine bay

NO engine harness

Roof painted gloss black.





Modified by JdMhEaD at 5:48 PM 7/6/2008

Modified by JdMhEaD at 8:49 PM 7/6/2008



dAng!
ITR#0181 Undergoing Rehab





JdMhEaD




Offline

1889 posts [100%]
Fnck thieves AL
9-8-2006
 « Re: Sleeved Motor, S300, T4/T67 partout thread! (JdMhEaD)« » Reply  Edit


bump



dAng!
ITR#0181 Undergoing Rehab



HybridHatchC1




Offline

1271 posts [96%]
MD
5-9-2001
 « Re: Sleeved Motor, S300, T4/T67 partout thread! (JdMhEaD)« » Reply  Edit


have pics of the downpipe



AIM= Taz0r

   


» Return to Classifieds: Forced Induction
Forum Jump
Quick Reply

Powered by ZeroForum 2.1.2b. ©2008 RelyNet, Inc.