Print  Email  Subscribe  RSS  Help
 Integra Console in Hatch [Archived]
Author Post

cb hatch




Offline

39 posts [100%]
halifax nova scotia
6-17-2007
  Please help !!« » 11:06 PM 5/12/2008 Reply  Edit

Please help me here Lol I just picked up a center console from a DC2 integra and im having a little trouble getting it mounted . MY problem is that i cant seem to get this lower piece off ? I unbolted the two screws on the side and i cant see anymore . Is it just supposed to pry off ?? Also am i gonna have to cut the bottom half below the ashtray , because it likes when i do get this bottom piece off that there will be a huge gap ?? I did try searching but the search engine is down . Please help !! [IMG][/IMG]



grog




Offline

1063 posts [100%]
Humboldt ca
1-23-2007
 « Re: Please help !! (cb hatch)« » 11:44 PM 5/12/2008 Reply  Edit

You have to remove the peice above it too, they are connected.


there are 4 screws holding that on. 2 down low on either side and 2 up top, open the glovebox to find the one one on the passenger side.

and I forget how two those are peices are connected to each other but they do come apart, so dont cut it.


Quote, originally posted by xerowatts »
I HAVE A 1990 CRX HF AND THE ENGINE BLOWED UP.

Quote, originally posted by mackadocious »
its prolly piece of rust that fell inside the rotor causing it to be cricket and make the car shake ..when stoping or ...or prolly motor over flooded with oil leaks



91_shoebox_Si




Offline

146 posts [100%]
morgantown wv
10-31-2007
 « Re: Please help !! (grog)« » 11:58 PM 5/12/2008 Reply  Edit

once you get the whole center piece out, there should be screws behind the ashtray on the inside of the console that need to be removed. you may have to remove the ash tray guide to get to them, i don't remember. get those screws off and it should come right apart.

cb hatch




Offline

39 posts [100%]
halifax nova scotia
6-17-2007
 « Re: Please help !! (cb hatch)« » 12:58 AM 5/13/2008 Reply  Edit

Awesome !! I just went out and figured out how to get it all apart . Just a little to dark out now to finish it off so ill have to get to it in the morning . Thanks a million guys !!! I appreciate it

cb hatch




Offline

39 posts [100%]
halifax nova scotia
6-17-2007
 « Re: Please help !! (cb hatch)« » 2:00 PM 5/13/2008 Reply  Edit

Just an update . I got it all apart and instaled the other console , but i can only get one of the screws to line up .Ive read in other posts about other people getting three of the four screws to line up ???? the only one i can get lined up is the one on the passenger side . I know that its not a direct bolt in , but im just wondering if im missing something ???

grog




Offline

1063 posts [100%]
Humboldt ca
1-23-2007
 « Re: Please help !! (cb hatch)« » 6:57 PM 5/13/2008 Reply  Edit

nope your not missing anything, its all custom. I was able to get all the screws back in, at an angle, and one I slotted the hole (on the console peice) to get it in.


Quote, originally posted by xerowatts »
I HAVE A 1990 CRX HF AND THE ENGINE BLOWED UP.

Quote, originally posted by mackadocious »
its prolly piece of rust that fell inside the rotor causing it to be cricket and make the car shake ..when stoping or ...or prolly motor over flooded with oil leaks



91_shoebox_Si




Offline

146 posts [100%]
morgantown wv
10-31-2007
 « Re: Please help !! (grog)« » 12:12 PM 5/14/2008 Reply  Edit

yeah, i could only get mine to line up to the pass. side hole as well. i just made another hole on the drivers side to secure it there and it was good. I still have a gap and I may fiddle with it moreto get it a little more flush but you have to work at it a bit. good luck.

joerogan




Offline

18 posts [100%]
St. Clair MO
5-14-2006
 « Re: Please help !! (91_shoebox_Si)« » 1:02 PM 5/14/2008 Reply  Edit

mine is also a little off.
   

» Return to Honda CRX / EF Civic
Forum Jump
Quick Reply

Powered by ZeroForum 2.1.2b. ©2008 RelyNet, Inc.