Top line oil pump any good?? [Archived]
Author
Post
eg6madness
Online
Top line oil pump any good?? « » 4:09 PM 5/12/2008
Reply
Edit
Are their oil pumps any good. Want to replace the one on my OBD 1 GSR and came across these, so just want to know you guys opinion .
DonF
Offline
« Re: Top line oil pump any good?? (eg6madness) « » 6:29 PM 5/12/2008
Reply
Edit
How much chearper is it then OEM? That plus 20% is how much quicker it will fail before the correct one. Just rule of thumb.
all-mtr-teg
Offline
« Re: Top line oil pump any good?? (DonF) « » 6:43 PM 5/12/2008
Reply
Edit
Does that same rule generally apply for say bearings or rings?
97 GSR with GSR block and head, LS crank, LS rod, 81.5mm ITR pistons, I/H/E
DonF
Offline
« Re: Top line oil pump any good?? (all-mtr-teg) « » 6:51 PM 5/12/2008
Reply
Edit
Generally from Topline or Bernie's parts, YES. From ACL, Clevite, NPR, Wiseco, Speed-Pro, Hastings, Gates, Goodyear, NO.
all-mtr-teg
Offline
« Re: Top line oil pump any good?? (DonF) « » 6:53 PM 5/12/2008
Reply
Edit
Quote, originally posted by DonF » Generally from Topline or Bernie's parts, YES. From ACL, Clevite, NPR, Wiseco, Speed-Pro, Hastings, Gates, Goodyear, NO.
Good to know, been using ACL, Clevite bearings and Hasting, NPR rings:thumbup:
97 GSR with GSR block and head, LS crank, LS rod, 81.5mm ITR pistons, I/H/E
DonF
Offline
« Re: Top line oil pump any good?? (all-mtr-teg) « » 8:02 PM 5/12/2008
Reply
Edit
Quote, originally posted by all-mtr-teg » Good to know, been using ACL, Clevite bearings and Hasting, NPR rings:thumbup:
Well I do not know if they are good enough for H-T guys, but they seem to work for Formula 1 guys, or Porsche, Mercedes, Audi, and Ferrari. Probably not expensive enough on E-Bay.
00MRSi
Offline
« Re: Top line oil pump any good?? (DonF) « » 8:39 PM 5/12/2008
Reply
Edit
Quote, originally posted by DonF » Well I do not know if they are good enough for H-T guys, but they seem to work for Formula 1 guys, or Porsche, Mercedes, Audi, and Ferrari. Probably not expensive enough on E-Bay.
John http://www.sms-products.com http://www.p1auto.com http://www.passwordjdm.com http://www.jlbmotorsport.com http://www.GBRTuning.com
Ass$nyper
Pirate General...YARRRR Offline
« Re: Top line oil pump any good?? (DonF) « » 9:05 PM 5/12/2008
Reply
Edit
Quote, originally posted by DonF » Well I do not know if they are good enough for H-T guys, but they seem to work for Formula 1 guys, or Porsche, Mercedes, Audi, and Ferrari. Probably not expensive enough on E-Bay.
Mahle is just starting to get on board with import guys and I'm thankful to see it Quote, originally posted by Brandon » They don't like being called midgets, they prefer child prostitute impersonators.
█ █ █
all-mtr-teg
Offline
« Re: Top line oil pump any good?? (DonF) « » 11:38 PM 5/12/2008
Reply
Edit
Yeah, the local machine shop stocks mahle and clevite, he also recommended total seal rings for my build, what do you think about those rings?
97 GSR with GSR block and head, LS crank, LS rod, 81.5mm ITR pistons, I/H/E
eg6madness
Online
« Re: Top line oil pump any good?? (all-mtr-teg) « » 12:08 AM 5/13/2008
Reply
Edit
the topline oil pump is $90 and the typeR is $117.
all-mtr-teg
Offline
« Re: Top line oil pump any good?? (eg6madness) « » 12:16 AM 5/13/2008
Reply
Edit
OBD1 lower timing belt cover.
97 GSR with GSR block and head, LS crank, LS rod, 81.5mm ITR pistons, I/H/E
Furyof4
Offline
« Re: Top line oil pump any good?? (all-mtr-teg) « » 8:09 AM 5/13/2008
Reply
Edit
Quote, originally posted by eg6madness » the topline oil pump is $90 and the typeR is $117.
Hondapartscheap.com
$90.79 oem
No reason to buy topline.
http://www.hondapartscheap.com...ity=0
http://www.hondamarketplace.co...38689
all-mtr-teg
Offline
« Re: Top line oil pump any good?? (Furyof4) « » 11:38 AM 5/13/2008
Reply
Edit
This ones cheaper after shipping and handling chargeshttp://www.hondapartsunlimited...t.jsp
To the OP, don't fall for the Type R hype, its only a GSR oil pump look at the part number.
97 GSR with GSR block and head, LS crank, LS rod, 81.5mm ITR pistons, I/H/E
soulpwr
Offline
« Re: Top line oil pump any good?? (all-mtr-teg) « » 2:51 PM 5/14/2008
Reply
Edit
Well what about topline pistons then?
Quote, originally posted by b19coupe » Word
Master of the Universe
Offline
« Re: Top line oil pump any good?? (soulpwr) « » 3:18 PM 5/14/2008
Reply
Edit
Mahle has traditionally been the choice of various car makers for their higher end models such as GM using Mahle for Corvettes and Chrysler using Mahle pistons for the Shelby turbo charged models.Maybe someone can step up and get pistons from Mahle for honda and then sling on ebay for $5 gross profit and provide dyno-advertising sheets showing 30-40whp gains from just piston swap
Don't bother to PM me. I am tired of internet fools.
Contact via RM Dealer or e-mail.
PuroMotor
Offline
« Re: Top line oil pump any good?? (Master of the Universe) « » 3:23 PM 5/14/2008
Reply
Edit
Quote, originally posted by Master of the Universe » That would da bomb, off da hizzay, fo shizzay, popo-zao :kfed shot-caller, big-baller looking character wear XXXL "shorts" and a Mack Truck cap:
hahahahaha
Powered by ZeroForum 2.1.2b. ©2008 RelyNet, Inc.
. That would da bomb, off da hizzay, fo shizzay, popo-zao :kfed shot-caller, big-baller looking character wear XXXL "shorts" and a Mack Truck cap:
