get RIGHT
Online
6918 posts [100%]
Selling YOU a Honda or Acura.
7-18-2005
|
| « Re: Type R & Legend rotors (supra360) | « » 11:19 PM 5/8/2008 |
Reply
Edit
|
SCCA Solo II STX #77
Gunuine / / / MUGEN ITR EXPO 8 @ VIR .... BE THERE Be There be there...
|
-DC4-
Online
863 posts [100%]
3-21-2007
|
| « Re: Type R & Legend rotors (get RIGHT) | « » 12:00 AM 5/9/2008 |
Reply
Edit
|
The itr and the legend rotors are different - they are not the same
45251-SP0-E00 legend rotor
45251-SZ3-000 itr rotor
3296 autozone itr rotor
31119 autozone legend rotor
The itr rotor is 23mm thick while the legend rotor is 28mm
PM me for AMSOIL and NGK Products
|
slofu
Offline
1542 posts [100%]
medium pimpin
11-2-2001
|
| « Re: Type R & Legend rotors (-DC4-) | « » 12:24 AM 5/9/2008 |
Reply
Edit
|
some legend rotors are 23mm; iirc, the 95 legend gs sedans had 28mm (i run them). the difference is in the width of the vents between the "plates".
| Quote, originally posted by b16a4 » | | can you use p30 [b16a] 81mm pistons in a b20 block ?[84mm] |
| Quote, originally posted by b16a4 » | | can i use sandpaper to hone my block? |
| Quote, originally posted by danmdevries » | | Remember ladies, blowjobs are like flowers, but for guys. |
real ricers wipe with chopsticks.
|
supra360
Offline
61 posts [100%]
toronto ontario
5-23-2006
|
| « Re: Type R & Legend rotors (-DC4-) | « » 5:37 PM 5/9/2008 |
Reply
Edit
|
 
|
slofu
Offline
1542 posts [100%]
medium pimpin
11-2-2001
|
| « Re: Type R & Legend rotors (supra360) | « » 5:41 PM 5/9/2008 |
Reply
Edit
|
if they clear ITR calipers/23T brackets, they're = ITR rotors.
| Quote, originally posted by b16a4 » | | can you use p30 [b16a] 81mm pistons in a b20 block ?[84mm] |
| Quote, originally posted by b16a4 » | | can i use sandpaper to hone my block? |
| Quote, originally posted by danmdevries » | | Remember ladies, blowjobs are like flowers, but for guys. |
real ricers wipe with chopsticks.
|
Dave_B
I have two showcars. Two.
Offline
9663 posts [101%]
blavica
8-25-2004
|
NOT the same... but they will work/fit with NO modifications to stock ITR brakes.I do however run them on the track car, because of the minimal thickness difference.
The Building Room For all your engine building needs Orlando, FL 407-657-6592PIC performance. Power In Control. http://www.picperformance.com
My 00 ITR H2 project is underway http://www.honda-tech.com/zerothread?id=1373697 PostWhoreville.com member #3
|
SuckMyDOHC
Offline
1449 posts [100%]
San Francisco CA
11-6-2003
|
| Quote, originally posted by Dave_B » | | NOT the same... but they will work/fit with NO modifications to stock ITR brakes. I do however run them on the track car, because of the minimal thickness difference. |
Front and rear?
2.0L NBP ITR 01-0902
2.0L GBP LS 94
FBP ITR 00-???? - New Project
|
ITR_cam
Offline
370 posts [100%]
Auckland, NZ
3-2-2007
|
carefull with that painted disk hat, wheel nuts will need tightning after a short distance
http://www.jspecgroup.com
http://www.bebo.com/ITRcam
|
| | |
