I had to replace mine a couple months ago. Its not that hard.
Trunk Lid Opener Cable/Fuel Fill Door Opener Cable Replacement
2-door
SRS components are located in this area. Review the SRS component locations and the precautions and procedures before doing repairs or service.
NOTE:
Put on gloves to protect your hands.
Take care not to scratch the body and related parts.
Remove these items from the left side of the vehicle:
Side trim panel
Door sill trim
Trunk side trim panel
Pull the carpet back as necessary.
Disconnect the trunk lid opener/fuel fill door opener cable (A) from the opener (B).
Release the opener cable from the clip (C). Remove the cushion tape (D), and detach the clip (E) with a clip remover.
Remove the fuel fill door latch (F) by turning it 90 ° , and detach the opener cable junction box (G) from the body.
Disconnect the trunk lid opener cable (A) from the trunk lid latch (B).
Using a clip remover, detach the clip (C) from the trunk lid, and detach the clips (D) from the trunk lid hinge.
Remove the trunk lid opener/fuel fill door opener cable from the vehicle. Take care not to kink the cable.
Install the cable in the reverse order of removal, and note these items:
Align the alignment mark of the cable to the clip on the bottom portion of the trunk lid hinge.
Replace any damaged clips.
HID retrofit club
member #0037
